Lay the foundation of your next build with the Antec Performance 1 FT Full-Tower Case. Designed for both seasoned and newcomers, the Performance 1 FT gives you ample room for gaming-focused components while promoting airflow.

Large enough to handle ATX, E-ATX, M-ATX, and M-ITX motherboards as well as graphics cards up to 15.7" long, you have ample room to store your gaming-level components with ease. Equip your system with multiple storage options using the three 2.5" drive bays for solid-state drives and two combo bays that support 2.5 or 3.5" drives. You can connect a wide range of peripherals with two USB-A 3.2 Gen 1 ports, one USB-C 3.2 Gen 2 port, and a 3.5mm combo audio jack. Magnetic mesh panels promote breathability and there are three 140mm fans located at the front of the Performance 1 FT along with a single 120mm rear exhaust fan. You can easily install various liquid AiO coolers to the front, top, and rear panels. A durable steel frame and tempered glass side panel provide solid footing and a clear look at your components.

ATX, E-ATX, M-ATX, M-ITX Support    Steel Frame & Tempered Glass Panel    3 x 2.5" Drive Bays    2 x 2.5/3.5" Drive Bays    8 x Expansion Slots    USB-A 3.2 Gen 1, USB-C 3.2 Gen 2 Ports    3 x 140mm Fans & 1 x 120mm Fan    Fits Radiators up to 420mm    Supports GPUs up to 15.7" Long    Built-In iUNITY Display

Connect your peripherals such as controllers and headsets with multiple ports found on the top panel. You get two USB-A 3.2 Gen 1 and one USB-C 3.2 Gen 2, giving you up to 5 and 10 Gb/s data transfer speeds, respectively, suitable for quickly managing your data and handling resource-demanding devices. A single 3.5mm combo audio jack supports a wide range of headsets, mics, and more. Included dust plugs for each port prevent dirt and debris, keeping the ports neat and clean.

Easily expand upon your system with eight expansion slots available for high-powered graphics cards up to 15.7" long as well as sound and network cards. Drop-proof bolt and stud system avoids side panel damage and provides a convenient DIY experience. Back-mounted PSU bracket provides easy installation for your power supply. Rubber grommets assist with cable routing and organization along with a dedicated wire management area complete with wire management ties.

While the Performance 1 FT includes three 140mm and one 120mm Storm T3 PWM fans, you can easily install additional fans for greater airflow without compromising performance. The front and top panels support up to three 140mm or 120mm fans while the rear of the case can support a single 120mm fan. Three 120mm interior fans can be installed on top of the PSU shroud.

The Performance 1 FT supports a wide range of radiators and custom liquid coolers at the front, top, and rear panels. You get enough room at the front panel to support radiators up to 420mm with a dedicated 60mm clearance for thicker setups. The top panel supports up to 360mm radiators, and a single 120mm radiator can be affixed to the rear panel.

The free-to-download Antec iUNITY software provides instant data on PC specs, loads, and usage. The top panel of the Performance 1 FT features a temperature display, giving you the thermal performance of your CPU and GPU. A dedicated button allows you to swap between both readings seamlessly.

Related Questions and Answers

Q: 1. Can this be used without a battery installed and run off of dc power only?

A: Yes, the unit comes with a DC power adapter that can power the device. A battery does not have to be installed in order for the unit to function.

Q: 2. Can this monitor be powered with 12v supply without a battery installed?

A: Yes, and B&H provides free 12V supply in the package.

Q: 3. Does it display timecode?

A: It will display whatever it is fed. If the camera you are using is outputting screen info, including timecode, this monitor will see it.

Q: 4. Hello, is the Lilliput A7S compatible with the canon 7D? Thank you.

A: Yes it is compatible. An Mini-HDMI to HDM is even included in the box to go fro the camera to the monitor. While this monitor does not come with batteries, it uses the same LP-E6 style batteries that the 7D uses.

Q: 5. Does it have focus assist?

A: Yes, it shows red outlines around the subject when in-focus.

Q: 6. How long is the battery life using the Watson NP-F975?

A: 4-5 Hours.

Q: 7. Can I monitor real time audio from the camera on this monitor? Any latency?

A: Yes, this monitor features both an internal speaker and a headphone jack, as well as audio-metering. The audio is received through HDMI, so there should be no latency.

Q: 8. What is the best way to power this monitor from Dtap source? Dummy L series? Dummy LP6 would be better but its unclear weather that plate is included with this monitor.

A: The package comes with a F970 battery plate and a LP-E6 battery plate , also B&H offers free DC adapter.

Q: 9. Looking to use this on the Sony FX30. I shoot at 4k 60. Will this be ok on this monitor? I use the SmallHD 501 and it's fine.

A: This monitor is limited to 4k 30fps. For 4k 60fps, we'd recommend upgrading to the Lilliput HT7S 7" On-Camera Control Monitor (BH #LIHT7S).

Q: 10. I just bought one of these and I'm confused about the battery. Does it charge when installed on the battery plate and plugged in to power?

A: The Lilliput A7s does not have internal batteries. It runs off of an NPF L series battery.