The Portman P1 Mini RGBW Decorative LED Light uses advanced warm white LEDs that are supplemented by RGBW LEDs to add a soft color-variable glow in a similar form to its larger counterparts. It can link to multiple units to pass through both power and DMX control signals.

For Stages, Theatres, and Studios    7 x 3W White LEDs | 7 x 10W RGBW LEDs    94° Beam Angle    DMX/RDM/WDMX Control    Programmed Macros and Strobe Effects

The Portman P1 Mini RGBW Decorative LED Light uses advanced warm white LEDs that are supplemented by RGBW LEDs to add a soft color-variable glow in a similar form to its larger counterparts. It can link to multiple units to pass through both power and DMX control signals.

A septet configuration of LED sources gives the P1 Mini a near-identical look to its tungsten counterpart. The color capabilities of the LED cells are veritably futuristic, yet the tubular 3W light sources contained within mimic warm-white halogen bulbs for a recognizably retro appearance. While these sources are adjustable only within a 1600-3200K tungsten color temperature range, they are backed up by a dynamic display of full-color spectrum light. This effect is achieved by 10W LEDs hidden behind the tungsten-type bulbs to provide consistent glows of a wide range of hues. Their red/green/blue/white configuration ensures a consistent rendition of cover across the entirety of their dimming range. The P1 Mini light fixture is enough to draw the attention of audiences, but rigging multiple units in an expansive structure is a sure way to mesmerize crowds.

Though it sports a particularly old-school façade, the P1 Mini operates using modern systems familiar to most lighting techs and stage designers. Located on the rear of the unit is a convenient LCD with four tactile buttons for navigating menus to set color, intensity, and other parameters to fit the needs of the production. As the P1 Mini is equipped with the Portman Color Feedback System, the buttons are backlit by RGB LEDs and will indicate a variety of current settings for hands-free monitoring of the light. When operating the fixture at a distance is preferred, a 5-pin XLR input is available for controlling these same settings as well as programmed macros using one's DMX control surfaces; a DMX output also allows for daisy-chaining up to 32 units at once. With the purchase of an optional wireless module from Portman, the P1 Mini may also be operated via WDMX.

Related Questions and Answers

Q: 1. Are the included gobos plastic or steel?

A: The included Aputure Spotlight Mini Zoom for LS 60d and 60x LED Lights, would be metal.

Q: 2. What gel frame would be recommended with this fixture?

A: At the front of the Aputure Spotlight Mini Zoom for LS 60d and 60x LED Lights is a gel slot with a top latch that behaves the same as the top latch on the front of the Aputure LS 60d an LS 60x LED Lights. You will be able to see an image of the gel slot on the front of the unit in the Instruction Manual on the first page under the "Fixture Components" section. If you prefer a separate gel holder, the Impact Universal Filter Holder - 12x12" (30.5 x 30.5 cm), B&H # IMUFHQ, may work by being placed on a light stand in front of the Aputure Spotlight Mini Zoom for LS 60d and 60x LED Lights.

Q: 3. Is this compatible with the Amaran 60x? (the Bowens mount will be, but how about the light spread)

A: This is compatible with the 60x.

Q: 4. I'll ask again, since the answer given so far is inadequate. What gel frame holder fits on the front of the spotlight?

A: The gobo holder is included with the modifier.

Q: 5. Does this softbox come with grids? or can we get grids?

A: The Godox Softbox for ML30 and ML30Bi LED Lights BH #GOMLSF3030 does not come with a grid.

Q: 6. Would this soft box work with Westcott Flex 1X1 mat?

A: Yes, unit is designed and made to Fits Luxli Timpani & Most 1x1 LED lights.

Q: 7. Is the diffusion 1/2 stop, full stop...? And are other densities available?

A: The diffusion is about one stop. There are no alternate densities available.

Q: 8. Is there a listing for the included iris?

A: We do not sell the Aputure gobo on it's own so we do not have a page for it alone. It holds size M steel gobos.

Q: 9. Does this Softbox provide a mounting adapter that can be used for AD100 Pro?

A: No, there is no mounting adapter provided to allow the Godox Softbox for ML30 and ML30Bi LED Lights (B&H# GOMLSF3030) to be used with the Godox AD100 Pro. As of February, 2022, there is no way to use this soft box with the AD100 Pro.

Q: 10. Does it increase or decrease the overall light output?

A: No, the Aputure Spotlight Mini Zoom will not increase or decrease the output of the light but will allow a end-user to adjust the light Beam Angle by 15/30 %