The Versa CXV14 Fluid Head with Pan Handle from Miller is designed to accommodate a wide payload range, 16 steps of counterbalance with CB Plus for fine adjustments, as well as five selectable pan/drag settings. Pan, tilt, and counterbalance can all be set to zero, enabling even the lightest of cameras to be supported. Maxed out, this head is rated to support camera setups up to 30.9 lb, adequate for a DSLR or mirrorless camera, a cinema camera, or a ENG camcorder. Securing your camera or rig is easy. The sideload quick release plate design enables you to simply drop in your camera without the alignment issues posed by rear-loading variations. The plate offers 3.9" of sliding range to balance your rig.

To survive fast-paced shooting environments, the CXV14 is die-cast from a lightweight, yet durable metal alloy with composite polymers and precision ball bearings for smooth mechanical operation. Even in harsh conditions, the CXV14 will perform reliably. The base of the CXV14 is a 100mm ball for mounting to compatible tripods and grip equipment. An illuminated bubble level makes it easy to level the CXV14 in dark environments. A fixed-length pan handle is included, and a second rosette is available for attaching an optional second pan handle.

Versa CX14 Fluid Head with QR Plate    Sprinter II 2-Stage Carbon Fiber Tripod    Mid-Level Spreader and Rubber Feet Set    Soft Carry Case with Backpack Straps    Head Includes Fixed Pan Handle    Maximum 30.9 lb Load Capacity    23.7 to 66" Height Range

Related Questions and Answers

Q: 1. Will this spreader fit E-Image AT-7602A tripod legs?

A: This spreader is listed as compatible with GA751, GC751, GA752, GC752, GA101, GC101, GA102 and GC102 tripods. It may not work with the AT-7602a.

Q: 2. What is the radius ie the length of the spreader arms from the center of the spreader to the ends. The arms are adjustable - so what is the arm length from center to tip when fully shortened and fully lengthened?

A: Spreader leg collapsed distance from center to tip is: 403 mm (15 )Spreader leg extended distance from center to tip is: 628 mm (24.72 )

Q: 3. Is the head compatible with the Manfrotto 501 plate?

A: No. The following takes a PL40 Quick Release Plate which is sold directly by seeder. http://www.seeder.com/about/48-en.html

Q: 4. Is this mid-level spreader compatible with the Benro Aero 7 carbon fiber tripod?

A: Sorry, there is no way to attach this to a single tube tripod such as the Benro Aero 7 Travel Video Tripod. Mid level spreaders such as these are meant for multi-tube video tripods such as the Benro A674TM, C674TM, A673TM, C673TM models.

Q: 5. Is this head compatible with manfrotto 501 quick-release plates?

A: Libec 650EX does use a quick release system that is similar to Manfrotto 501PL. One can swap the plates between Libec and Manfrotto heads that use Manfrotto 501PL.

Q: 6. Will this BR-2B Mid Level Spreader work with a Libec T58 tripod?

A: Hello, unfortunately not. Since T58 mid level spreaders are no longer manufactured, we recommend the SP-2B Floor Level Spreader as it is compatible with the T58 tripod. Thank you.

Q: 7. Hello! Can I buy this part? "https://static.bhphoto.com/images/multiple_images/images500x500/1536751228_IMG_1051901.jpg"! Thanks

A: Yes, the part number for the Sachtler Mid-Level Carbon Fiber Spreader for flowtech 100 is listed below. Sachtler Mid-Level Carbon Fiber Spreader for flowtech 100 BH #SAS20560001

Q: 8. What screw size is the tie down of the 75mm ball?

A: The tie down of the Libec 650EX Tripod System with Mid-Level Spreader (65mm Ball) is 68mm long.

Q: 9. Will this tripod work with a Sachtler 20III Video Head?

A: The Sachtler 20III is 100mm, as is the Sachtler flowtech 100 MS Carbon Fiber Tripod with Mid-Level Spreader & Rubber Feet, so yes they are compatible.

Q: 10. Is the bag included in this purchase?

A: Yes, this Sachtler aktiv14T & flowtech tripod kit includes the ENG2 Padded bag. Sachtler ENG 2 Padded Bag BH #SAPBENG