The black ViewZ VZ-AM01 Wall Mount accommodates 27 to 32" flat panel monitors weighing up to 165 lb. The tilt wall mount features a -10 to 0° tilt. It is compatible with universal mounting and 200 x 200 and 400 x 200mm VESA mounting patterns.

27 to 32" tilt wall mount

Universal mounting pattern

Compatible with 200 x 200 and 400 x 200mm VESA mounting patterns

Related Questions and Answers

Q: 1. Does the operating system have the capability of showing several images at once?

A: The VZ-215IPM is a monitor with onboard Android OS. The only limitation in the number of images is the software being used.

Q: 2. What is the SDI input rating? Does this monitor accept 12G SDI input?

A: The monitor does not accept 12G-SDI. The maximum input is 3G-SDI.

Q: 3. How can I mount this to a baby roller stand?

A: A 75mm by 75mm vesa mounting plate (with a 5/8" baby pin receiver) can be used, such as this product SKU: IMME108P https://www.bhphotovideo.com/c/product/1448859-REG/impact_me_108p_monitor_mount_adapter.html/specs

Q: 4. does this have the ability to mount on a regular stand?

A: The definition of "regular stand" cannot be determined here, so we'll say that any stand, which has the proper threaded mount and which can sustain the weight of this unit, may be used... and this includes tripods or c-stands.

Q: 5. Is this a 10bit panel?

A: ViewZ states that the ViewZ 17.3" 1080 12G-SDI Video Production Monitor is an 8-bit + FRC display and that it is not 10-bit.

Q: 6. Is a power adapter included?

A: Yes, The ViewZ 21.5" Low-Cost Broadcast Quality SDI Monitor comes with a DC wall power adapter in the box. 1) 15V DC Adapter 1 piece included 2) HDMI A/A cable 1 piece 3) VGA cable 1 piece 4) VIDEO cable 1 piece 5) AUDIO cable 1 piece 6) Base bracket

Q: 7. What prevents the display from mounting flush with the wall? I don't understand why there is a 1.25" distance from the wall if the whole mount is recessed.

A: This is a limitation of the design.

Q: 8. Is there a template for mounting

A: NO! Completely unnecessary! Figure the center of where you want the tv, left,right and up,down and mark it with a pencil. Before removing uprights spread them out to max and that is the most they can be mounted apart from each other on the wall. I would subtract an inch to avoid problems. Ideally you want to mount them 22-26 inches apart at the same height. It is all dictated by where your studs are located. Just dont mount to close together, less than 16 inches apart you best keep it centered all the time. Remove the uprights from the crossbars. You can use the same upright to mark both sets of holes. Your template. Use hardware capable of bearing the load(250lbs). If they are mounted at different heights as long as not to much. Half inch or so. There are screws at the top of each to level the bars perfectly. This is probably the BEST TV stand for sale anywhere! GOOD LUCK!!!

Q: 9. does it have a quad included?

A: Yes, this monitor does have quad view.

Q: 10. Is this a 10bit panel?

A: Yes, this is a 10-bit monitor.