The MAKdot SH Red Dot Sight allows fast, both-eyes-open targeting with full situational awareness. Its large 3.5 MOA red dot makes for confident targeting, and offers eight brightness settings for good visibility in any lighting condition. The dot reticle adjusts for elevation and windage at 1 MOA per click. Auto shutoff after four hours conserves power from the CR2032 battery—which, conveniently, can be replaced without having to remove the sight from your weapon. The MAKdot SH is waterproof down to 3.3' and built to MIL-STD-810 standards. It fits the Aimpoint Micro T-2 footprint.

3.5 MOA Red Dot Reticle    8 Brightness Levels    1 MOA Impact Point Correction    6063 Aluminum Housing    Waterproof to 3.3'    Replace Battery While Mounted    Fits Aimpoint Micro T-2 Footprint

• Fast, both-eyes-open target acquisition
• 80% light transmission
• 1x magnification
• Unlimited eye relief

• 1 MOA per click windage and elevation adjustments
• Eight brightness settings
• Auto shutoff after four hours of inactivity

• 6360 aluminum housing
• Waterproof to 3.3' for 30 minutes
• Powered by one CR2032 battery
• Compatible with Aimpoint Micro T-2 footprint

Related Questions and Answers

Q: 1. Hi,What is the camera weight that FloPod can stablize?

A: The Dot Line RPS Studio FloPod I Video Stabilizer will support up to 8lbs.

Q: 2. What lens caps can be used with the Dot Line Tele-Wide 58mm Lens Hood?

A: It will take 58mm snap on caps such as this one. https://a href= http://www.bhphotovideo.com/c/product/818332-REG/Sensei_lc_58_58mm_Center_Pinch_Snap_On.html/ target= _blank www.bhphotovideo.com/c/product/818332-REG/Sensei_lc_58_58mm_Center_Pinch_Snap_On.html//a

Q: 3. Is this hood good for taking photos through windows at an angle and blocks reflections?

A: A lens hood can help reduce reflections when placing the lens against or near a window but the better option for shooting through a window would be a lens skirt such as this: https://bhpho.to/3ShEeau

Q: 4. Whats the actual weight capacity that this can hold? The size of this is perfect for me, I need something ultra compact, but I also need it to be able to handle a 5d, 16-35mm lens, idc follow focus and camera mounted shotgun mic.

A: The Magic Rig is quite strong. Our customer reviews show that cameras in the weight range of the Canon 5D will work with the rig. Also If balanced correctly the IDC Follow focus should also work. You will be approaching the upper weight ranges when adding the FF and mic.

Q: 5. What is the maximum camera weight that FloPod can balance?

A: The Dot Line RPS Studio FloPod I Video Stabilizer will support up to 8lbs.

Q: 6. Will it works without vignetting on 10mm lens ( i need it for fuji 10-24mm lens) ?

A: Yes. You should not get vignetting on an effective focal length of 20mm.

Q: 7. an 67mm rubber lens hood be used in Sony FE24 - 70 mm. F4.0 ZA without Vignette?

A: While we would love to test this and make sure, unfortunately, we cannot. It is our opinion, however, that no vignetting will occur particularly if you have no filter. As an option, you can also consider the all metal hood that we know works. Sensei PRO 67mm Wide Angle Aluminum Lens Hood B&H # SELHMW67

Q: 8. will this fit a d90 Nikon? and if so is there any attachments that i will need?

A: This will work with the Nikon D90, nothing additional needed.

Q: 9. Will this work for a 15mm-45mm lens on a APS sensor?

A: If you are referring to the Canon EF-M 15-45mm f/3.5-6.3 IS STM, as the lens has 49mm filter threads, you would need to purchase the Dot Line Wide-Angle 49mm Lens Hood, B&H # DODL0481, for your usage needs.

Q: 10. Will these work on Nikon AF-Mount cameras?

A: Yes, the Dot Line Manual Extension Tube Set will work on Nikon F mount autofocus cameras, however using these tubes will be manual focus only.