The MAKdot SXP Red Dot Sight is a lightweight, compact pistol optic that allows fast, both-eyes-open targeting with full situational awareness. Its large 3.5 MOA red dot is highly visible, and can be set to any of 10 brightness levels for good visibility in any lighting condition. Use the adjustment screws for up to 80 MOA of elevation and windage correction. Auto shutoff after four hours conserves power from the CR2032 battery. The MAKdot SXP's polymer housing is built to withstand splashing water, and fits the Shield RMS footprint.

3.5 MOA Red Dot Reticle    10 Brightness Levels    80 MOA Impact Point Correction    Lightweight Polymer Housing    Splash-Proof Construction    Fits Shield RMS Footprint

• Fast, both-eyes-open target acquisition
• 3.5 MOA red dot reticle
• 80 MOA windage and elevation adjustment ranges
• Ten brightness settings
• Auto shutoff after four hours of inactivity

• Lightweight, splash-proof thermoplastic polymer housing
• Powered by one CR2032 battery
• Compatible with Shield RMS footprint

Related Questions and Answers

Q: 1. Will this work with a Sony a6000 mirrorless camera?

A: It should.

Q: 2. Can't / won't focus to infinity. Is there an adjustment for this?

A: There is no adjustment that can be made on the Dot Line lens adapter.It could be that the specific lens you have is not 100% compatible with the adapter. It is best that you contact use directly to discuss this.

Q: 3. Will this work for a 15mm-45mm lens on a APS sensor?

A: If you are referring to the Canon EF-M 15-45mm f/3.5-6.3 IS STM, as the lens has 49mm filter threads, you would need to purchase the Dot Line Wide-Angle 49mm Lens Hood, B&H # DODL0481, for your usage needs.

Q: 4. Does this work with ef and ef-s lens?

A: Yes the Dot Line Manual Extension Tubes are compatible with the EF-s lenses too.

Q: 5. Does this lens hood have male threads so that it can screw onto the front of a 67mm lens filter?

A: Yes, the Dot Line Tele-Wide Lens Hoods, including the 67mm size have threads both in the front and back of the hood.

Q: 6. hi, is this adapter works auto metering for Sony a7 when use a M mount voigtlander 35 1.4 lens? if not which adapter you recommended? thanksSteven

A: The Dot Line NEX Adapter for Leica M Bayonet Lenses Adapter does not provide electronic communication between the camera and the lens--works with manual focus and exposure. In order to have auto-meter functions, you would need this adapter:http://bhpho.to/1mbVh9m

Q: 7. Will these work on Nikon AF-Mount cameras?

A: Yes, the Dot Line Manual Extension Tube Set will work on Nikon F mount autofocus cameras, however using these tubes will be manual focus only.

Q: 8. is this metal?

A: No.

Q: 9. does auto focus work if mounted with a camera that has an inbuilt motor(D7100 for Example)?

A: Nope, focus will have to be adjusted manually.

Q: 10. Will it works without vignetting on 10mm lens ( i need it for fuji 10-24mm lens) ?

A: Yes. You should not get vignetting on an effective focal length of 20mm.