Designed for big-game hunting and long-range shooting with a wide zoom range and an illuminated ranging reticle, the Trijicon 5-25x50 Tenmile Riflescope offers a large objective lens and fully multicoated optics for a bright, sharp sight picture. The red-illuminated MOA Ranging Crosshair reticle features a red or green dot in the center, with holdover hash marks to each side and below the center, plus a few above. For zeroing, or when you need to dial adjustments rather than holding over, the turrets (exposed elevation, capped windage) adjust impact point at 1/4 MOA, with 50 MOA elevation and 40 MOA windage adjustment ranges. Zooming is quick with the repositionable zoom ring lever. The 5-25x50 Tenmile HX is waterproof and nitrogen-purged for fog-free performance.

Illuminated Reticle, 1st FP    30mm Maintube    50 MOA Elevation, 40 MOA Windage    1/4 MOA Impact Point Correction    Exposed Zero-Stop Elevation Turret    6064 Aluminum Housing    Fully Multicoated Lenses    Nitrogen Purged, Fog and Waterproof

• 5-25x zoom magnification
• 50mm objective diameter
• Fully multicoated lenses
• 23.3-4.7' field of view at 100 yd

• First focal plane
• Red or green illuminated
• Center dot and crosshairs with hash marks for elevation and wind holds
• Ten brightness levels with off settings in between
• 68 hours runtime on one CR2032 battery (medium-high setting)

• 1/4 MOA per click impact point correction
• 50 MOA elevation and 40 MOA windage adjustment ranges
• Side-focus parallax adjustment
• 3.0-3.6" eye relief

• 30mm maintube
• 6064 aluminum construction
• Exposed zero-stop elevation turret
• Easy-focus eyepiece and repositionable magnification lever
• Nitrogen purged, fog and waterproof

Related Questions and Answers

Q: 1. What is the back focus distance of this reducer?

A: With the focal reducer, it is 63.5mm.

Q: 2. Open slot for a second SSD drive? Do I need to purchase a second power adapter if I constantly use the laptop both office & home

A: The MSI 16" Vector 16 HX Gaming Laptop does not have an open slot for a second SSD drive. It would be a matter of personal preference/convenience if you want to purchase a second power adapter.

Q: 3. Can it be used with Sony FE lenses too or just the probe lens?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (BH #VE07FREF2E) is only designed for use with Laowa's Probe lenses. We would not recommend using it with any other lenses.

Q: 4. Can this camera be mounted to a ceiling tile?

A: Yes, The NewTek NDI HX PTZ3 Camera comes with a ceiling mount in the box. You may need to cut or remove part of the tile when installing and possibly add a board for the mount to securely connect to though.

Q: 5. When mounted on a canon cne 18-80 lens on a lumix bs1h camera, Does the quality of the image will weaken becuase the glass ?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (EF to L Mount) is only meant to mount the Probe Lens from Venus Optics and none other. We cannot guaranty any quality results of mounting another lens onto your desired system with this adapter.

Q: 6. What is the battery run time, about 35 minutes? Not being sarcastic. I actually want to know.

A: The MSI 18" Titan 18 HX Gaming Laptop (Black), BH #MSTITAN18HX, battery capacity varies according to the workload.

Q: 7. Is this adapter compatible with any other model PL lenses?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (PL to X Mount) is designed particularly for the Venus Optics Laowa 24mm f/14 Probe Lens (ARRI PL, Cine-Mod Version), and it is not guaranteed the quality and fitment will retain if using third party PL lenses.

Q: 8. What are this camera's sensitivity and minimum illumination specs?

A: The minimum illumination of the NewTek NDI HX PTZ3 Camera listed by NewTek is 1.0 lux. Specs from NewTek - https://bit.ly/3Jq1a5e

Q: 9. Grateful to anyone who can tell me how much the Baveyes reducer weighs?

A: The KIPON Baveyes Focal Reducer Pentax 645-XD 0.8x weights 500 gm / 1.1 lb.

Q: 10. Cat 5e Ethernet cable adequate?

A: Yes. The following unit runs off a NDI protocol an end-user will only want to use cat5 or cat 6 cable.