Create the synthesizer of your dreams with the Behringer 902 Voltage-Controlled Amplifier, an authentic reproduction of the circuitry from the Moog Modular 55, 35, and 15 Series synthesizers, allowing you to build your very own unique synthesizer that can fit in a standard Eurorack case, for a very affordable price.

The 902 module features two signal inputs and two signal outputs that can be used to amplify two sources, either audio or control voltage, at the same time via a 3.5mm connector. A rocker switch allows you to toggle between linear and logarithmic response modes, while you can manually set the control voltage with the Fixed Control Voltage knob. Control inputs at the bottom of the module can accept control voltage signals from other modules to change the amplification level. The 902 includes a ribbon power cable and mounting screws.

Vintage-Sounding 902 VCA Module    Inspired by Moog Modular 55, 35, and 15    Two Signal Inputs and Outputs    Amplification of CV and Audio Signals    Linear or Logarithmic Switchable    CV Inputs and 1 Manual Control    Includes Ribbon Power Cable    Includes Mounting Screws

• Vintage-sounding 902 VCA module from the ‘70s
• Authentic reproduction of the circuitry from the Modular 55, 35. and 15 Series
• Artist roster includes world’s most famous pop, rock, and jazz musicians
• Module features 2 signal inputs and 2 signal outputs for amplifying two sources simultaneously
• Amplification of both audio and CV signals
• Switchable between linear and logarithmic response
• CV inputs and 1 manual control for maximum flexibility

Related Questions and Answers

Q: 1. can you link two sound craft ui boxes to create double the inputs?

A: You could always run the output of one mixer into the other, but you'd only be able to control one at a time with a single device. If the UI16 is not big enough for you, consider a larger (and more expensive) mixer.

Q: 2. Is this mixer good for video live production to bring the audio to my switcher?

A: Yes, that would be a use for this mixer.

Q: 3. The box dimensions are listed as 19 wide by 7 high, but the form is described as floor and I only see holes on the left side handle. Can it be securely mounted vertically in a 4 unit rack in a way that it will withstand local touring use?

A: And yes, the UI16 can be mounted in a standard rack.

Q: 4. how many speakers total can I connect to this unit - busy restaurant - will they be loud enough without distortion?

A: The number of speakers connected will depend entirely on the speakers' wattage, what their taps are set to, and the way they are wired. The HP-AMP-250BT provides 250w of power, so to prevent clipping the amp the total wattage of speakers connected (+20% for headroom) should be below this number.

Q: 5. How good are the mic preamps?

A: They are as good or better than Mackie's mic pre's and that certainly is a good thing. Soundcraft is a quality product with an excellent reputation for providing quality and value and reliability at every price point. This mixer is no exception. Depending upon your application, this might be a great choice for you.

Q: 6. Shipping cost to Rockhampton , WLD , Australia

A: Unfortunately Australian Customs & Border Protection Advisory / Due to export regulations and/or manufacturers restrictions, we are unable to accept orders with a shipping address in AUSTRALIA for the following item(s): Soundcraft Ui16 16-Input Remote-Controlled Digital Mixer.

Q: 7. Can the Ui12 model be rack mounted?

A: The Ui12 is not designed to be rack mounted. USB, Ethernet as well as power switch are located on the left and right sides of the unit.

Q: 8. can I export the UI 16 to india

A: Most European countries will allow electronic devices to be shipped. To be sure you will need to contact your carrier to find out if they will be able to send that unit.

Q: 9. How many tracks can it record over USB?

A: This has a 2x2 USB interface, meaning 2 channels in, 2 channels out, which is basically going to be the stereo mix.

Q: 10. Does the Soundcraft UI series mixers support Dante interface?

A: No, the Soundcraft Ui Series mixers do not support Dante. However, an option card can be added to mixers in the Si Series to enable Dante compatibility.