Get the ultimate wind protection for you omnidirectional lavalier, field-recording, or headset microphone with the Bubblebee Industries The Windbubble PRO Fur Windscreen (Beige, XS). The PRO version features a special rubber mount, which absorbs shocks and stops the transference of vibrations through to your microphone's capsule. This XS-sized Windbubble PRO easily fits on microphones with a diameter of 3 to 5mm. The package includes one fur windscreen.

Note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a cardioid/directional microphone, then the original Windbubble is the preferred microphone windshield for your mic.

Wind Protection for Omni Lavalier Mics    Also for Field Recording & Headset Mics    Fits Mics 3 to 5mm in Diameter    Multi-Pile Faux Fur    Soft Rubber Mount    Acoustically Transparent

• Countryman: B3, B6, E3, E2, E6, H6
• DPA: 6060, 6061, 6066, 4466
• Sanken: COS-11 without metal popshield, COS-11D-HWM
• Sennheiser: MKE 1, MKE 2, HSP 2, HSP Essential Omni
• Sony: ECM-88, ECM-90
• Omnidirectional lavalier, field-recording, and headset microphones 3 to 5mm in diameter

• Unlike hard plastic mounts, The Windbubble PRO's soft rubber mount absorbs shocks and stops vibrations transferring to your mic's capsule.
• In addition, the rubber mount has a slight, conical shape inside, which prevents you to push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity.
• This means that your mic will consistently stay in the best possible position inside the windshield, making it possible to engineer a smaller, overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. 

• The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off mid-shoot.

• The Windbubble PRO utilizes the company's multi-pile faux fur specially designed with varying lengths of fur to help gradually slow down the wind before reaching the mic.
• The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency.
• The mic's capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
• The Bubblebee fur is less shiny than others to better blend with skin, clothes, and other surrounding materials.

Related Questions and Answers

Q: 1. Will this fit on a Sennheiser me2 version 2, or only one the original me2?

A: The Auray Metal Windscreen for Senal OLM2 and Sennheiser ME2 Microphones can be used on both the Sennheiser ME 2 and ME 2-II Omnidirectional Lavalier Microphones.

Q: 2. Should this hold the capsule tight or should it be able to rotate when the clip is attached?

A: This should be snug enough to hold onto the capsule but still able to be removed.

Q: 3. Can it be connected to rodecaster duo via wireless connection?

A: The RODE TX-M2 Handheld Wireless Microphone can only be wirelessly connected to RodeLink wireless mic receivers (Rode RX-CAM). That is how you would establish a wireless connection, and then the receiver can be physically connected to an audio interface such as the RodeCaster Duo.

Q: 4. Can this be purchased with the handheld mikes added?

A: In theory, handheld transmitters from the same product line, on the same frequency, could be added to the VocoPro Digital-Play-16 Sixteen-Channel Digital Wireless System with Headsets & Lavalier Mics to replace some of the beltpack transmitters. It does not appear that the handhelds are available separately on their own at this time, however.

Q: 5. How far from subject can mic be placed from subject before too much noise?

A: Hello Kevin, the TX-M2 transmitter operates up to 100 meters/328 feet. Note that this is under perfect conditions and best practices include good line of sight, limiting WIFI interference, and keeping a well charged battery.

Q: 6. Is this system good for a Stage play musical production??

A: The VocoPro Hybrid-Play-16 is a solid choice for a low cost wireless microphone solution for multiple applications including stage productions.

Q: 7. Can two of the Rode Interveiw Pros connect to one Wireless Go II receiver?

A: Yes, two units of the RODE Interview PRO Wireless Handheld Condenser Microphone can be connected to a single RODE Wireless GO II receiver at the same time.

Q: 8. Can you use all 16 channels at the same time on stage with no interference between the mics?

A: Yes, you can use all 16 channels together. There is one receiving channel for every transmitter to be on their own separate channel simultaneously.

Q: 9. Can the presenter move around a little bit from the microphone and still get good quality recording to the camera?

A: This mic must be used with Rode's RX-CAM recorder. For quality pickup, the presenter does need to be consistently speaking within 3-6 inches of the microphone. Beyond that, it will be hard to hear the presenter.

Q: 10. will this work with the mkh 8040 and mkh 8050 from sennheiser? and what shock mount should i use with this? difference to cages?

A: Yes, the Rycote Baseball Felt-Covered Windscreen (Black, 19/20mm, Single) will work with the Sennheiser MKH 8040 and MKH 8050 models. You will be able to use any shockmount that is compatible with these microphones as well.