60 Db Noise Cancelling Earbuds

Gra-vue Mvio Vda 1 X 7 Analog Video Signal Distribution Amplifier

Product Code: ga15490
Availability: In Stock

$1,196.85 $1,819.21

Qty

0 reviews Write a review

Description
Reviews (0)

The MVIO VDA 1 x 7 Analog Video Signal Distribution Amplifier from Gra-Vue is an analog video distribution amplifier which distributes one analog video signal via one input to seven BNC outputs. The unit supports NTSC and PAL broadcast standards. It also features a video cable equalization for up to 984' in length using a Belden 8281 cable. Both gain and high-frequency response are adjustable. The VDA also features internal LED signal status indicators.

Parameters
Analog Video Input	1 x BNC
Analog Video Outputs	7 x BNC
Impedance	75 Ω
Input Return Loss	>45 dB up to 10 MHz
Output Return Loss	>42 dB up to 20 MHz
Level	0.3 to 1.5 VDC pp
CMRR	>60 dB @ 10 KHz
Gain Range	-6 dB to +6 dB, adjustable
Stability	<0.02 dB/10°C
Frequency Response	-3 dB @ 35 MHz, typical value
SNR	＞75 dB, unweighted
Noise	AC noise: <1 mV pp
Equalization	Range: 0 to 984' (0 to 300 m) with Belden 8281 cable
Operating Temperature	32 to 104°F (0 to 40°C)
Power Consumption	60 W
Power Supply	120 - 240 VAC, 50/60 Hz
Dimensions	8.66 x 16.92 x 1.73 (22 x 43 x 4.4 cm)
Weight	14.6 lb (6.6 kg) approximate
Packaging Info
Box Dimensions (LxWxH)	20 x 12 x 3"

1RU half rackmount chassis

One analog video input, seven analog video outputs

Supports PAL/NTSC broadcast standards

Analog video bandwidth is 30 MHz

Both gain and HF-response are adjustable

Internal LED lights indicate signal status

Related Questions and Answers

Q: 1. Can this be used to pass tri-level sync for Genlock?

A: The Kramer 1 x 20 Composite/SDI Video Distribution Amplifier cannot be used to pass tri-level sync for genlock.

Q: 2. Can someone tell me whether the input on this Comprehensive CDA-VGA104HD is a male or female port? Thanks.

A: Input and output are female on the Comprehensive CDA-VGA104HD because a VGA cable is male on both side.

Q: 3. Does it comes with power supply?

A: No, it does not. You will need the RDL PS-24AS.

Q: 4. Can this be used to pass through tri-level sync for Genlock purpose? Thanks!

A: Yes, the Kramer 1 x 20 Composite/SDI Video Distribution Amplifier would be able to distribute Sync to up to 20 sources.

Q: 5. Is it rack mountable?

A: If you use a rack mount shelf to set it on.

Q: 6. Does this support portrait orientation?

A: there is no mention of support for portrait orientation in the manufacturer specifications

Q: 7. Q1:Does it distribute video signal with timecode embedded ? Q2: Does it distribute timecode/ genlock signal from a third timecode or genlock generator?

A: No, The Shinybow 1 x 4 Composite Video Distribution Amplifier would not pass or support timecode/Genlock.

Q: 8. Will this provide a clean signal to run a 200 foot cable?

A: I've never tried one that long. It's worked great on sorter runs that we use. Are's are typically 50 to 100 foot cables.

Q: 9. The weight of the unit and the weight of the package is contradicting. The weight of the unit, as listed, appears to be too high. What is the actual weight please?

A: The weight of the PreSonus HP4 - 4-Channel Headphone Distribution Amplifier is 5 pounds.

Q: 10. Are the outputs isolated from inputs and are all the outputs isolated from each other?

A: Yes

There are no reviews for this product.