Designed to support the transfer of RF and video signals, the 10' Whirlwind BNC Video Cable is a coaxial cable complete with two male BNC connectors. The cable is made with Belden 4694F, a 12 GHz flexible, precision coaxial cable that's designed for 4K UHD. Crafted from 18 AWG solid silver-plated copper conductor, the cable features 75 ohms of resistance. The dual-tinned copper braided shield provides 95% coverage for solid RF and noise rejection, while the PVC jacket is durable for most professional applications.

HD / SDI Cable    75-Ohm Impedance    18 AWG RG-6 Coaxial Cable

Related Questions and Answers

Q: 1. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver

Q: 2. Will this work with the atomos inferno. This is 3sdi atomos is 12sdi ?

A: Yes it will. The Atomos Inferno accepts signals up to 12G-SDI, it can accept a 3G-SDI signal as well.

Q: 3. Hi. Does this check phase also?

A: It ONLY tells you if your cables are correctly wired or not. It will not tell what the specific problem is IF there is a problem. This is a very basic, albeit well-made, device. I use it to identify bad cables in the field.

Q: 4. Can the receiver output HDMI and SDI at the same time to enable a loop to another monitor?

A: Yes you can. If using a smallhd monitor you can just run one sdi out to that, and loop out of the smallhd as well.

Q: 5. Can you use two or three of these in one location or will the signals interfere with each other?

A: You can put each set on a different channel, so it should work just fine

Q: 6. Can this be used to pull focus?

A: This is a Wireless Video Transmission System, not a wireless follow focus. However you could use this product in conjunction with a wireless follow focus system to view the video.

Q: 7. can i use in URSA MINI 4k ?

A: Yes you can. The Ursa Mini 4K has a SDI output which you can use to connect to this wireless system.

Q: 8. Can this mount to the Movi Pro pop and lock system?

A: That is possible. The FREEFLY Pop-N-Lock Quick Release System, B&H # FR91000205, has both 1/4"-20 and 3/8" threads to attach accessories. You would just need to use something like a 1/4"-20 to 1/4"20 Spigot or articulating arm to connect this to the Pop-N-Lock. 1/4"-20 Spigot - https://bhpho.to/2jdVltE E-Image Mini Arm with 1/4"-20 Studs - https://bhpho.to/2WODQn7

Q: 9. Are these units water proof?

A: They are not. This is not a water proof product.

Q: 10. Can this device pass full Ancillary Data? Particularly SDI Audio Channels 15&16, the channels used for Blackmagic's CCU data. I know some of these units either compress or strip down the audio channels if they're based on WHDMI chipsets.

A: I dont believe it passes the full ancillary data, not 100% on this. Worked on a set where they requested teradeks for this exact reason.