The Whirlwind NAC3X-001.5 powerCON TRUE1 is a 1.5' power cable for linking Whirlwind PL1T-420 boxes together. This is Neutrik’s first true mains connector with breaking capacity according to IEC 60320 and UL 498 standard and thus allows disconnecting under load. The UL and VDE certified, single-phase system is designed for 16A, 250V. The cable connector comes with an integrated twist-lock and can only be opened with a tool. All Powerlink products are hand-wired in Rochester, NY, USA.

Powercon True1 Inlet to Powercon True1 Outlet for Linking Whirlwind PL1T-420 Boxes Together

Related Questions and Answers

Q: 1. Will this case hold the IOptron Tri-Pier?

A: Yes, this case will work with the iOptron Tri-Pier 360 for CEM120 EQ Mount (Black/Red), BH #IO8037.

Q: 2. What’s the size of the front filter threads?

A: The front mount filter thread would be a 72mm filter thread.

Q: 3. Will this work on an M10?

A: The Leica Correction Lens II (-1.5 Diopter), B&H # LECLM15DPT, is listed as the correct -1.5 diopter for use with the Leica M10 Digital Rangefinder Camera.

Q: 4. Can I use this device as a splitter to make a backup recording on a Zoom H6 for example?I mean, I have a shotgun mic. I split the signal in two, put it in two inputs of the recorder... I don't want to use a Y because I could lose a lot of gain on the two outputs. Or do you have other devices that can do this? Or a good mixer (I mean affordable 300-500) to to team with the H6 that can do this? I plan to use it with a Shotgun AND a Lavalier. So 2x2 outputs. Thanks! ;)

A: This device is designed for line level signals only. Splitting a microphone signal is never a good practice as there will be signal loss and added noise. A mixer, not a splitter is the way to go. The Mackie Mix8 (B&H # MAMIX8) is an 8-channel compact mixer that features high quality components, a rugged metal chassis, and is designed for a variety of sound reinforcement applications. The mixer features two mic/line inputs with 48V phantom power, two stereo 1/4 line inputs, and stereo 1/4 aux send and return. It is capable of accommodating dynamic and condenser microphones, keyboards, DJ setups, portable music players, and more.Each of the two mic/line inputs is equipped with XLR and 1/4 connectors, a dedicated 3-band EQ, aux send, pan, level control and an LED overload indicator. The two stereo 1/4 line inputs each feature an aux send, 3-band EQ, level control, balance control and also have an LED overload indicator. a href= http://bhpho.to/1sLQeDj target= _blank http://bhpho.to/1sLQeDj/a

Q: 5. Can filters be applied to front of lens, I don't see threads in photos.

A: No, they cannot. The TTArtisan 21mm f/1.5 for Sony E-mount does not have front filter threads.

Q: 6. Is the TTArtisan 21mm f/1.5 a full frame lens?

A: Yes. The TTArtisan 21mm f/1.5 Lens for Leica M is a full frame lens.

Q: 7. Should you take into account the -0.5 of the viewfinder for a total correction or should you buy a diopter with your prescription and leave the -0.5 after the correction?

A: The built-in -0.5 correction should be taken into account when choosing a diopter correction for distance viewing. The chosen diopter value should be short by 0.5 if a minus value is indicated by the prescription, or higher by 0.5 if a plus value is indicated. So your first part of the question in your assumption is correct!

Q: 8. does this have electrical contacts to allow manual focus assist on R5 ?

A: No, there are no electronics on the mount of the TTArtisan 21mm f/1.5 Lens for Canon RF that communicate with the camera to allow the focus assist.

Q: 9. Can this lens fit Sony aiii

A: Yes, the TTArtisan 21mm f/1.5 Lens for Sony E is compatible with the Sony A7 III.

Q: 10. does this fit the Leica mp ?

A: Yes, the Leica Correction Lens M (+1.5 Diopter) does work on the Leica MP.