The Microphone Foam from Bubblebee Industries is designed for your extra-small+ shotgun microphone to help protect against light wind disturbance and vocal plosives. With an acoustically transparent design made from lightweight, open-cell foam, the windscreen is effective at eliminating unwanted vocal plosive and swooshing from boom maneuvers. The windscreen's low profile makes it ideal for run-and-gun journalism, narrative and documentary film, or sports videography.

For Extra-Small+ Shotgun Microphones    Reduces Wind Noise    Prevents Vocal Plosives    Acoustically Transparent Design

Deity S-Mic 2s
Sanken CS-M1
Schoeps MiniCMIT

Related Questions and Answers

Q: 1. I'm looking to save space vertically. (from the mount, upwards) Is this the same size vertically as the D4 DUO?

A: Yes the V-Mic D4 and V-Mic D4 Duo will take up the same amount of verticle space. The Duo is a slighly larger mic though.

Q: 2. Does the shock mount include a 1/4" 20 threaded hole on the bottom?

A: The shock mount for the Deity V-Mic D4 Mini Shotgun Microphone has a 3/8" female thread on the bottom of the cold shoe and the mic comes with a thread adapter that reduces the thread size to 1/4"-20.

Q: 3. will this mic fit perfectly in the XLR handle for the Sony FX30? not loose? just right?

A: The Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone will not fit perfectly inside the Sony FX30 camera bracket, a spacer will be required, we recommend this item: Auray Rubber Spacer Sleeve for XLR Shotgun Microphones on Camcorders B&H # AURSSMCAM45 MFR # RSSM-CAM45

Q: 4. Will the MKH50 fit in this?

A: Yes, the Sennheiser MKH 50 P48 Microphone will fit the K-Tek KSTMC1 Stingray Microphone Case for Two Shotgun Microphones.

Q: 5. sorry to be a pain, but I need a lightning or usbc for my iPhone on s21, what adapter would I need?

A: To use the Deity Microphones V-Mic D4 Mini Ultracompact Camera-Mount Shotgun Microphone BH #DEVMICD4MINI with an iPhone or Samsung Galaxy s21 mobile phone use these adapters: Apple Lightning to 3.5mm Headphone Jack Adapter B&H # APLAADAP: https://bhpho.to/3sApIOk 8-Pin Lightning Connection 3.5mm Stereo Mini Plug For Use with iPhone 7 and iOS Devices Samsung USB Type-C to 3.5mm Headphone Jack Adapter (White) B&H # SATC35HPJAW: https://bhpho.to/3mirFOs 1 x USB Type-C Male Connection 1 x 3.5mm Stereo Female Plug

Q: 6. How many inches is it from the very tip of the XLR end to the begining of the notches?

A: Deity has not provided this specific measurement for the Deity Microphones S-MIC 2S unfortunately.

Q: 7. Would a Saramonic SR-C2001 3.5mm male to USB-C cable work to connect 3.5mm output on this mic directly to a DJI Osmo Action 4?

A: Yes, the Saramonic SR-C2001 3.5mm TRS Male to USB Type-C Adapter Cable will successfully connect from the 3.5mm TRS output of the Deity Microphones V-Mic D4 Shotgun to the USB-C input of the DJI Osmo Action 4 Camera..

Q: 8. Will this fit the regular e835, without the switch?

A: Hi there - yes, this will fit the e 835 and e 835-S variants of evolution wired microphones.

Q: 9. Does the Sennheiser MKE600 fit?

A: The Sennheiser MKE600 shotgun mic is slightly larger than 10 inches, so it would not fit into the Small Alfa Case 10 MicTube Shotgun Microphone Case. We suggest using the Alfa Case 15 Medium MicTube Shotgun Microphone Case, B&H# AL20015MTLB.

Q: 10. what foam windscreen is recommended for this? If i don't want to use the furry wind cover

A: There are no foam windscreens available separately that are specifically sized for the Deity Microphones V-Mic D4. You could try using the Auray WHF-2040 Foam Windscreen For 3/4" Diameter Microphones (B&H # AUWHF2040) which is close in diameter, but it's not an exact fit for the V-Mic D4. A rubber O-ring or rubber band or a bit of padding or even tape can be used to create a tighter fit for the windscreen if you find that it is too loose.