Transport memory cards and transfer data using the moss green CreateMate High-Speed Card Reader Case from PGYTECH, which features one UHS-II SDXC card slot and one UHS-II microSDXC card slot as well as room to store four SD cards, four microSD cards, and four nano SIM cards. It is IP54 rated, which helps protect against drops, dirt, and splashes, and is plug-and-play compatible with Windows, Mac, Linux, and Android using an integrated 5 Gb/s USB-C 3.2 Gen 1 cable.

Card Reader and Case Combo    Stores Ten Total Cards    Holds Four SD Cards & Four microSD Cards    Holds Two Nano SIM Cards    1 x UHS-II SDXC Card Slot    1 x UHS-II microSDXC Card Slot    Integrated USB-C 3.2 Gen 1 Cable    IP54 Rated    Plug-and-Play    Windows, Mac, Linux, Android Compatible

Effortlessly carry, store, read, and change memory cards on the go, this product is the perfect companion for photographers who demand both efficiency and convenience.

This card reader features a transmission speed of up to 312 MB/s using the 5 Gb/s USB 3.2 Gen 1 (USB 3.1 Gen 1/USB 3.0) standard. It supports UHS-II, UHS-I, and non-UHS SD and microSD media.

This plug-and-play card reader case works well with your USB-C smartphones and tablets, without the need for an app, thus bridging the gap from card to screen in seconds.

The card holder can fit four SD cards, four microSD cards, and two nano SIM cards.

A silicone case provides drop and shock protection.

Easily remove memory cards from devices without risking damage to the card using the included eject pin.

Devices
Cameras, smartphones, drones, and action cameras

Memory Cards
Compatible with UHS-II and UHS-I SD/SDHC/SDXC and microSD/SDHC/SDXC cards

Systems
Windows 7 and above, macOS 10 and above, Linux, and Android

Related Questions and Answers

Q: 1. Is the provided cable USB-C to USB-C (both ends identical)?

A: Yes, the cable provided with the SanDisk Professional PRO-READER CFexpress Type B Card Reader is USB-C male on both ends and 19.6" long.

Q: 2. Is it compatible with RED DIGITAL CINEMA 4TB PRO CFexpress 2.0 Type B Memory Card?

A: The SanDisk Professional PRO-READER CFexpress Type B Card Reader should read the RED DIGITAL CINEMA 4TB PRO CFexpress 2.0 Type B Memory Card without an issue.

Q: 3. Does this card reader/writer work for UHS-I for Mac?

A: should work fine, best to reformat the SD cards for Mac in Disk Utility, except if you are going to use them in a camera or audio recorder, which requires PC format

Q: 4. How long is the provided USB cable?

A: The provided USB-C cable for the San Disk PRO-READER CFExpress Card Reader measures 19.6 inches.

Q: 5. When adapted for USB A via https://bhpho.to/3PxYmmV will it work on WIN7 or WIN8 O/S?

A: Yes, when adapter for USB-A with one of the adapters, the SanDisk Professional PRO-READER Multi Card Reader will it work on WIN7 or WIN8 O/S.

Q: 6. Is this compatible with a Delkin CFExpress POWER Memory Card?

A: Yes, the San Disk PRO-READER CFexpress Card Reader is compatible with the Delkin CFExpress POWER Memory Cards.

Q: 7. Can this reader read XQD and CFexpress cards?

A: Hi--this reader can only read CFexpress cards. A firmware update could theoretically make it compatible with XQD cards as well.

Q: 8. Is the card reader faster than a PC built in card reader? Processor: 12th Gen Intel(R) Core(TM) i7-12700, 2100 Mhz, 12 Core(s), 20 Logical Processor(s) Installed Physical Memory (RAM): 32.0 GB

A: Generally, a card reader will operate faster than a PC built-in card reader, but you would need to compare them in action to confirm that.

Q: 9. Will this reader work with Windows 11Pro?

A: SanDisk Professional PRO-READER SD and microSD Card Reader will work with Windows 11 Pro. Ref: https://bit.ly/3jHx9TU

Q: 10. Two questions: 1. Can this read the cards that are used in the canon C300 mark III about to release? They are cfexpress type B but not sure if they use any xqd 2. Can I use an apple thunderbolt 3 to thunderbolt 2 adapter to connect this to my thunderbolt 2 macbook pro? Or is there an adapter to connect it? Obviosly usb 2 would be last resort and very annoyingly slow so trying to figure out how to connect at a higher speed. I read the apple adapter might be for thunderbolt 3 but not usbc so not sure how I can connect cfexpress type b card to my thunderbolt2 macbook (even if that means a different reader and dock from owc or something thats fine just need some help with this.

A: The ANCFX31PK is not compatible with the XQD cards. The following is an adapter that you may want to consider. https://www.bhphotovideo.com/c/product/1548491-REG/prograde_digital_pgrwcfxxqdana_digital_cfxb_xqd_thunderbolt_3.html/specs So long as the thunderbolt 3 side of the adapter is connected to the card reader, then you can connect a TB2 cable from his macbook to the adapter