The Battery Eliminator Stand from Atomos is used to power an Atomos Ninja V, Ninja V+, Ninja, or Ninja Ultra monitor/recorder unit that accepts a Sony L-Series type battery. The eliminator also features a kickstand that can fold out, allowing you to set the monitor down safely on a flat surface. This battery dummy requires the separately available Atomos Locking AC Power Adapter.

NOTE: The eliminator requires the separately available Atomos Locking AC Power Adapter #ATOMPWR012.

For Ninja V/V+, Ninja & Ninja Ultra    Sony L-Series Type Battery Dummy    Requires Separate AC Power Adapter    Flip-Down Kickstand on Back    Accepts 6.2 to 16.8 VDC

Related Questions and Answers

Q: 1. Is it possible to connect this to a Tilta battery Plate with a 7.4 V output & use it to power a Shinobi 7?

A: The Atomos AtomX Sony L-Series Type Battery Eliminator requires the correct cable for power. If your Tilta plate has a d-tap with 7.4 VDC you can use this: Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 • MFR #ATOMDTPCB2

Q: 2. Which cable would you need in order to connect this to a dummy battery like an Ansso NP-F970 F970 to LP-E6 Full Decoded DC Coupler Power Adapter Battery?

A: Hello Marc, unfortuantely the LP-e6 batters are quite low powered so they won't last too long, however there are people who have bought/made the NP-F to LP-E6 adapters. you'll need to get one of those.

Q: 3. Will this work with the SmallHD Focus 7 monitor?

A: Yes, but I would recommend B&H # SMCDCSONYLUS instead.

Q: 4. I'd like to rephrase my previous question - If I have a something like a Tilta battery plate with a 12v& 8v output barrel connectors, could I use the 12v output port to connect a male to male barrel cable to this Atomos battery eliminator? Or would I have to use a special cable to screw into the Atomos plate? Also, what are the minimum power requirements? Thank you

A: Response to answer - I apologize for leaving that out. I assumed this one only fit the Ninja V but I guess it can be used on others as well. I have the Ninja V and I am hoping to use this battery eliminator along with a cable to connect to either the DJI Ronin S, OR, a battery plate with DC 12v barrel connector output.

Q: 5. In response to: Hello Marc, the answer varies because it depends on which Atomos unit you use, it can be from 5.6 - 14.6v. the DC side is 2.5mm. I apologize for leaving that out. I assumed this one only fit the Ninja V but I guess it can be used on others as well. I have the Ninja V and I am hoping to use this battery eliminator along with a cable to connect to either the DJI Ronin S, OR, a battery plate with DC 12v barrel connector output. Are both of these options available and safe or which one is possible? My goald is to reduce the weight of batteries on my gimbal using both NinjaV and Canon EOS R. Thank you!

A: This product is designed to power the Atomos Monitor only and requires the Atomos Locking AC Power Adaptor, BH #ATOMPWR012. We are not aware of a way to connect this to the power output from a Ronin-S or a battery plate.

Q: 6. To rephrase my question from yesterday, Thanks for the quick response, but that isn't going to work. My Tilta Battery Plate, https://www.bhphotovideo.com/c/search?Ntt=tilta%20battery%20plate&N=0&InitialSearch=yes&sts=hist-ps uses Sony NPF style batteries to supply the BMPCC 4K 12v via a DC jack, & has another DC jack rated @ 7.4 V that I'd like to use with the Atomos battery Eliminator https://www.bhphotovideo.com/c/product/1493126-REG/atomos_atomdca001_atomx_battery_eliminator.html?sts=pi&pim=Y to power my Shinobi 7. Looking for a cable to achieve this. There is no D tap on the Tilta Battery Plate. Any help would be greatly appreciated. I'm trying to avoid having to use a V mount as this rig is used mainly for handheld & Ronin S work. Trying to keep it as light as possible. Thanks.

A: Hello Gregg, ah then this is different, we do have a 2.1mm already built in, but if you want to add another then yes of course this is fine, however im not 100% sure it can or connect. if the adapter is 2.1mm then it should work. this is the power requirement: Power Input voltage 6.2V - 16.8V Operating power 5.8V - 7.2V Compatible batteries 2 x NPF L series Built in battery No Battery Run time (Record) 5200mAh - up to 2hrs, 7800mAh - up to 3hrs Continuous power Dual battery slots DC in connector Locking DC jack Dtap Via optional DTap to DC cable

Q: 7. What size Dtap to DC barrel do I need? On this page Atomos said 2.1mm, on their Cable page they said it is 2.5mm. Why isn't that just a part of the basic description?????

A: The barrel connector on the Atom X battery eliminator is 5.5 x 2.1mm. One would need a D tap to 2.1mm barrel connector such as Atomos D-Tap to DC Barrel Coiled Cable BH #ATOMDTPCB2 https://bhpho.to/3Eycd6b or Kondor Blue Coiled D-Tap to Locking DC 2.1mm Right-Angle Cable (16 to 50") BH #KODCTAP21LCK https://bhpho.to/3JoY1jL.

Q: 8. Would this battery eliminator plate work with the SmallHD 5.5" Focus OLED Monitor (SDI)?

A: You can use the Atomos AtomX Sony L-Series Type Battery Eliminator with the SmallHD 5.5" Focus OLED Monitor (SDI).

Q: 9. What cable do I need if my set up is Tiltaing Battery Baseplate 12V out to Shinobi? The D-tap cable is for the Camera.

A: This will require the DC to D-tap cable from Atomos (in addition to the battery eliminator)

Q: 10. Can I connect a regular 2.5mm dc power cable to this?

A: You cannot. This requires the separately available Atomos Locking AC Power Adapter, #ATOMPWR012. https://bhpho.to/38ivBnE