Supporting up to four SAS-3 tape drives to your network, The ATTO XstreamCORE ET 8100T-TN0 Intelligent Bridge helps to back up your important data and keep it safe from catastrophic events. Acting as an external desktop adapter, this bridge allows your business to deploy and share tape storage over a 10 Gb/s Ethernet iSCSI network with two SFP+ optical slots and RJ45 to SFP+ copper cable transceivers. An LTO-7 or later compatible tape drive may be connected through the 12 Gb/s mini-SAS (SFF-8644) connector.

The ATTO Distributed Software Architecture enables up to 2 GB/s sustained transfer rates by prioritizing transaction efficiency and high-performance memory management. Configure your XstreamCORE ET 8100T-TN0 using the web-based command line interface (CLI).

Please be aware that this device is operating system independent, and an iSCSI initiator is required.

Works with iSCSI Ethernet Hosts    4 x Mini-SAS HD Tape Drive Support    2 x 10G SFP+ Inputs    1 x 12G SFF-8644 (SAS-3) Output    Up to 2 GB/s Sustained Transfer Rate    Desk Mountable    ATTO Advanced Data Acceleration    ATTO SpeedWrite Technology    Includes RJ45 to SFP+ Transceivers    Operating System Independent

iSCSI Network Protocol enables Ethernet connectivity and maximizes interoperability

The ATTO Distributed Software Architecture (ADSA) is a self-optimizing real-time operating system designed specifically for embedded hardware. ADSA acts as a translator of one protocol to another and integrates advanced protocol, error handling, and application requirements into an existing infrastructure. The onboard data acceleration technology features multiple parallel I/O engines with end-end I/O processing and intelligent management of hardware buffer allocation.

ATTO Advanced Data Streaming provides controlled acceleration for smooth data streaming.

ATTO SpeedWrite technology improves SAS tape write performance by up to 20%

Small and portable therefore equally as useful in the field as they are on a desktop or in a server room.

Automatic tape drive mapping via a simple management console for quick set up and smooth operation.

Related Questions and Answers

Q: 1. Is necessary to have more than one ATEM Streaming Bridge, one as source + ATEM Mini Pro/ISO, and a second one at the destination?

A: You will only need the ATEM Streaming bridge at the destination. The ATEM switcher is the source. You can either plug the switcher directly into the bridge OR you can plug both devices into the same network.

Q: 2. how is it different from HighPoint RocketStor 6124V?

A: This one is hardware driven RAID with a dedicated RAID card. Transfer speeds are much faster as well. Getting 730MB/s READ and WRITE in RAID 5. Much stable as well. I had some instability issues with 6124V.

Q: 3. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 4. what is the HTS code for this when exporting/importing?

A: For your inquiry, please reach out to the manufacturer Ubiquiti.

Q: 5. Would you be able to use two of these to create a point to point system instead of hooking into a network?

A: Yes, you can use two Blackmagic Design 2110 IP Mini BiDirect 12G Converter to create a point to point system.

Q: 6. If I have 3 of these set up at 3 studio cameras, I would need 3 at the mixer. How would I use Talkback for the 3 operators?

A: If you connect all three Blackmagic Design 2110 IP Mini BiDirect 12G Converters to a computer via USB-C, you can use the Blackmagic Converters Setup software to rout your talkback to each operator individually or all three at once.

Q: 7. Will this work with the original BMD Studio Camera 4k Pro (Non G2) using its 10g ethernet?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is listed as supporting Supports all SD, HD, and UHD standards up to 2160p60.

Q: 8. Does this ER-4 router work with Non-Ubiquiti switches or will this only work with Ubiquiti branded switches?

A: The Ubiquiti Networks ER-4 3-Port EdgeRouter can work with any network switch.

Q: 9. is this unit stable for RAID 5?

A: You can use the unit for a RAID 5 array.

Q: 10. Many people area asking whether you can use the Bridge as a solution to simultaneously streaming to YouTube or a restreamer AND sending a signal to Lobby displays on the same network. This is a VERY common use case. The answers are still confusing. If the answer is "yes," how this is accomplished with the bridge?

A: The ATEM Mini Pro switchers can stream directly over Ethernet to only one place at a time. This can be to the Streaming Bridge or to som other service but not both. However the ATEM can also connect to a computer as a webcam over USB. The computer stream to different services using 3rd party software such as OBS. I hope this is clear.