PolyMax PLA from Polymaker is designed as an easy-to-print filament with improved mechanical properties. Part of the PolyMax family of 3D printing filaments, PolyMax PLA is produced with Polymaker's Nano-reinforcement technology to deliver exceptional mechanical properties and printing quality.

PolyMax PLA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.

PolyMax PLA also features Polymaker's Jam-Free technology, which improves the heat stability of the filament with softening temperatures over 284°F. As a result, the filament shows minimal softening in the cold end and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.

Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

Designed As Easy-to-Print Filament    Nano-Reinforcement Technology    Improved Mechanical Properties    750g Weight Accuracy    374 to 446°F Print Temperatures    40 to 60mm/s Print Speeds

374 to 446°F

40 to 60mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. Will this accommodate a Panasonic DMW-BLC12 battery (for the Lumix DMC FZ1000)? thank you

A: Yes this pouch would hold the Panasonic DMW-BLC12 Battery just fine. The size of the battery is similar to a DSLR Sized Battery.

Q: 2. What fabric is in the interior? Is it padded?

A: The entire pouch is a soft canvas cover.

Q: 3. You have to take the bag off to access the camera?

A: You don't HAVE to. The bag can be swung off one shoulder and you can unzip the bottom area where the camera equipment is designed to be stored.

Q: 4. What are the interior dimensions? Will a Canon LP-E6 battery with the back cover on fit? Thanks.

A: So I don't have the Interior Dimensions, my apologies. I checked Tenba's Site they don't have that information either, but I did have someone try a Canon LP-E6 Battery in the case. It does fit perfectly actually.

Q: 5. Will this hold VB 26 batteries for a Godox V1 flash?

A: No, the Tenba Reload 1-Battery Pouch (Gray) is a touch too small for the VB-26 battery,

Q: 6. Will this fit the Panasonic DMW-BLG10(LX100)?

A: Yes, the DMW-BLG10 battery will fit in the Tenba Reload 1-Battery Pouch.

Q: 7. Does it come with the camera insert/dividers?

A: The Cooper DSLR Backpack comes with a removable camera insert with two dividers.

Q: 8. Would this hold a roll of 35mm film?

A: I tried it. The pouch will hold a roll by itself and the flap closes completely. With the roll in its canister it sticks up a little, but the flap still closes enough to hold the film in.

Q: 9. will this fit my 50mm 1.4?

A: Hi Sam, the lens case you need for your 50mm 1.4 is the LP1014.

Q: 10. Can this be used for tray processing? I have always used the Polymax T solution in the past and can only find this RT version.

A: No, the, Kodak POLYMAX RT Developer and Replenisher (5L, to Make 25L) can not be used for tray processing. It is designed for Roller-Transport Processors.