PolyMax PLA from Polymaker is designed as an easy-to-print filament with improved mechanical properties. Part of the PolyMax family of 3D printing filaments, PolyMax PLA is produced with Polymaker's Nano-reinforcement technology to deliver exceptional mechanical properties and printing quality.

PolyMax PLA is compatible with most of the 3D printers available on the market. Examples include the Ultimaker, Flashforge, Snapmaker, LulzBot, Raise3D, Flsun, Artillery, Anycubic, Creality, and more.

PolyMax PLA also features Polymaker's Jam-Free technology, which improves the heat stability of the filament with softening temperatures over 284°F. As a result, the filament shows minimal softening in the cold end and can melt rapidly once entering the heating zone, leading to excellent printing quality with zero risk of nozzle jams.

Please check out the below print settings and other properties, which are based on the use of a 0.4mm nozzle and the Simplify 3D v.3.1 printer.

Designed As Easy-to-Print Filament    Nano-Reinforcement Technology    Improved Mechanical Properties    750g Weight Accuracy    374 to 446°F Print Temperatures    40 to 60mm/s Print Speeds

374 to 446°F

40 to 60mm/s

77 to 140°F

Glass, Blue Tape, BuildTak

On

Related Questions and Answers

Q: 1. I have Hikvision DS-9632NI-I8 nvr with 2 WD60PURX 6tb drive installed. I want to install 6 more hard drives. Is this drive will be compatible for my system?

A: Yes these are recommended drives for the NVR

Q: 2. what is the warranty on this drive?

A: Says 3 years on WD's site.

Q: 3. is this drive compatable with hikvision 4k nvr?

A: Yes the wd purple drives are recommended for use by Hikvision

Q: 4. Will this hard drive only work for surveillance system?

A: This was one of the hard drives my NVR manufacture recommended. It has worked exceptionally well. I would highly recommend it but Im afraid I cant answer your question. Perhaps a computer tech would provide an answer. B&H is an excellent company with great customer service.

Q: 5. what is in this bundle? I've seen bundle on other sites that show the camera, a film, batteries and the camera case.

A: The following items are included with this bundle: FUJIFILM INSTAX Mini 11 Instant Film Camera (Sky Blue) INSTAX Mini Instant Film (10 Exposures) INSTAX Photo Holder Clip Stand INSTAX DIY Idea Booklet

Q: 6. Can this be used for tray processing? I have always used the Polymax T solution in the past and can only find this RT version.

A: No, the, Kodak POLYMAX RT Developer and Replenisher (5L, to Make 25L) can not be used for tray processing. It is designed for Roller-Transport Processors.

Q: 7. I have a ZOSI dvr for 8 channel. Can this work to record video from them

A: If your recorder uses 3.5 inch drives with SATA connectors, this drive should work just fine. I am 99% sure that your recorder uses SATA drives. Its industry standard. Check the owners manual for maximum supported drive capacity. I know that some recorders have drive size limits and if you install a drive that is of bigger capacity than recorder can support, you may have issues. My Lorex NVR supports two 2TB hard drives and this drive was literally plug-and-play. Good luck.

Q: 8. iS THIS HDD COMPATIBLE WITH THE ZMODO DVR??

A: This is regular BARE drive. If your DVR requires some special embedded software, you need drive from manufacturer of DVR. It works for most of the DVRs I use for.

Q: 9. What is best WD 2TB drive to use with Directv HR 21-100 SATA port to increase recording capacity?

A: The WD 2TB Desktop Everyday 3.5 Hard Drive B&H # WEIDDM2 will work well for you.

Q: 10. Does WD honor the warranty directly if I buy the OEM version or do I need to purchase the retail version? Who handles the warranty with the OEM version?

A: This hard drive would come with a 3 year manufacturers warranty.