Designed as a component for your THANOS-PROCINE camera support system, the DigitalFoto Solution Limited Carbon Fiber Handheld Post Sled consists of a height-adjustable post capable of balancing your cine camera configuration. The fine-tuning knobs on the camera platform and quick release plate make for efficient transitions between tripod-mounted and handheld configurations.

Adjust the post height from 2.2 to 3.6' and add the included 1.1 and 2.1 lb counterweights to offset heavy loads. Pass-through power and 3G-SDI connections allow you to supply power to your camera and accessories while delivering video signals to your secondary monitor. Additional power can be supplied using the V-mount battery plates or 16V and 24V D-Tap output ports. The sled can be attached to the separately available dual arm and support vest to support larger loads.

Quick Release Camera Plate    Fine Tuning Knobs on Camera Platform    2.2 to 3.6' Height Adjustment    1.1 and 2.1 lb Counterweights    Pass-Through Power and 3G-SDI Signal    V-Mount Battery Plates, D-Tap Outputs

Related Questions and Answers

Q: 1. Do you offer the Adjustment Tool for adjusting the Arm Tension?

A: At this time we don't have the adjustment tool.

Q: 2. My video camera is Panasonic HC-x1000 4K is good for my camera. Thank you

A: No it is not designed for your camera. This device requires you to pair it with an electronic gimbal (such as the Crane 3 depicted in the photo) which typically do not work well with your camcorder.

Q: 3. Is this the exact same vest that comes with the DF DIGITALFOTO Thanos SE?

A: No, the vest that is included with the DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals is not the same as the DigitalFoto Solution Limited THANOS-SE Compact Tiltable Universal Single-Handle Gimbal Support Vest System.

Q: 4. All this work with black magic ursa mini pro 4.6?

A: no it will not. the camera will exceed the max payload supported

Q: 5. Will this work this the Ronin 2 or the Movi Pro?

A: There is no clear way to mount the Ronin 2 or the Movi Pro to the Thano Pro.

Q: 6. Will work with the new Ronin 4S Pro?

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring will work and is compatible with the DJI RS4 Pro gimbal.

Q: 7. Will it work with a Sony FS5 camera?

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm will work with the DJI RS2 or the Zhiyin 3S gimbals that would be able to support the Sony FS5 camera. Just add a gimbal.to support the camera. Models that would work are listed below. RS2 https://bhpho.to/3dhrvkJ 3S Pro https://bhpho.to/3xTFZAY

Q: 8. does this come with the yoke and arm?

A: Yes, the yoke and arm are included.

Q: 9. I just purchased this, after using it for a bit is there something I can purchase that can allow me to tilt the gimbal without having to tilt my body? I'm using the RS3.

A: The DigitalFoto Solution Limited THANOS-PRO Support Vest with Dual-Spring Arm for DJI RS 2, RS 3 & RS 3 Pro, and Other Handheld Gimbals has no method to tilt the arm or post. With this system, tilt is to come from the gimbal, not the arm and post.

Q: 10. Hello. Do you know if it has any limit in the size operator?

A: No not really. The support vest is fully adjustable to fit a wide range of body sizes. Combined with the arm, the vest system supports rigs that weigh 5.5 to 19.8 lb.