Add this Upright Ultra Handle from Wooden Camera to your RED DSMC3 cinema camera, such as the KOMODO, KOMODO-X, or V-RAPTOR, to add handheld support, trigger control, and additional accessories. The handle mounts onto the top of your camera using 1/4"-20 screws and features a Pogo connector to provide run/stop trigger operation using the button on the handle.

There are also two 1/4"-20 threads on the front and six 3/8"-16 anti-twist threads on the handle for adding additional accessories. The handle is also compatible with the RED DSMC3 Touch 7.0" monitor.

Mounts onto RED DSMC3 Camera    Run/Stop Trigger Control    Mounts via 1/4"-20 Threads    1/4"-20 and 3/8"-16 Accessory Threads    Compatible with RED Touch 7.0 Monitor    Works with KOMODO/KOMODO-X/V-RAPTOR

Related Questions and Answers

Q: 1. Does the 19 mm end opening mean a rod can be screwed into the end of the handle?

A: Sorry but the mention of a 19mm on this handle is an B&H web error for it does not have one. Other Wooden Camera Handles that do are:

Q: 2. Is the hole spacing also compatible with the "RED DSMC2 TACTICAL TOP PLATE" or only with the WC DSMC2 Top plate ?

A: this is compatible with the WC DSMC2 Top plate

Q: 3. Will this fit on the Komodo x without the rest of the wooden camera cage?

A: No, the Wooden Camera Ultra Handle System for RED KOMODO-X requires the cage to mount to.

Q: 4. would it fit the Cine 7?

A: No, the RED DIGITAL CINEMA Hood for DSMC3 RED Touch 7" LCD is not compatible with the SmallHD Cine 7 Touchscreen On-Camera Monitor (L-Series), BH #SMMONCINE7.

Q: 5. Will this handle fit on top of the Redrock Micro ultraCage Black for the c100?

A: Unlike the standards for placement of 15mm rods, there is no standard for handles and unfortunately we are not able to test the compatibility of these two different brands of handles. That being said they do look very similar and the swap may very well work.

Q: 6. is there any wooden tophandles that attach via arri antitwist dual pin mount? i like this discontnued one BH #SMHTR2640

A: There are currently no Wooden Camera top handles that incorporate anti-twist locking pins.

Q: 7. What's the weight capacity of this with the Wooden Camera swat rail?

A: We were unable to find a weight rating. However, it is shown with RED cameras. A fully decked out RED with a big Angenieux zoom will be in the 25lbs to 35lbs range. I am of the opinion that weight rating is well within the range of this handle.

Q: 8. Is this compatible with the "RED DAMC2 Tactical Top Plate"?

A: The Wooden Camera Master Top Handle for RED DSMC2 (Main Handle Section) BH #WO248800 • MFR #248800 is compatible with the WC DSMC2 Top plate.

Q: 9. I have a Blackmagic Cinema Camera, with my plate, rails, follow focus and matte box on bottom. I'm new to the BMCC and the need for elaborate rigging, so I'm not sure how much I will need to eventually mount (light, audio, monitor, etc.), but I'm sure it will be more than I think! Can anyone comment on the versatility/expandability of this handle system in this regard? Do I need to look at a handle on rails or with more mounting points? Any red flags I should be aware of? Concerns to note?

A: If you have a wooden camera (or most any other brand) cage to mount it to they'll always have countless mounting points to attach accessories like monitor arms and such. So I don't think you'll have problem with expandability.I own this handle, however, I have since bought the nato handle version. Which attaches to a rail in a kind of quick release set up. I found that as I changed lenses which would in turn change the balance and weight of the rig I need to take the handle of a relocated (and sometimes turn it around) to rebalance everything. This got a bit tedious with screw on version. With the Nato handle it takes seconds.Hope this helps.

Q: 10. is it compatible to mount on top of the Red Komodo outrigger handle?

A: The Wooden Camera Complete Arca-Swiss Style Top Mount Kit for RED KOMODO and RED Komodo Outrigger Handle cannot be mounted together.