Offering higher impact resistance and enhanced rigidity compared to standard PLA materials, you can print a wide range of items with Polymaker 1.75mm PolyLite PLA Pro Filament, allowing you to create operational prototypes, real-world use items, and more.

Derived from corn starch or sugar cane, this durable Polylactic Acid (PLA) material provides a recyclable, natural, thermoplastic polyester suitable for printing a litany of creations. PolyLite PLA has a printing speed range between 30 to 70mm/s and a printing temperature range of 374 to 428°F as well as a bed temperature range of 86-140°F. This filament supports direct and indirect drive systems with a retraction distance and speed of 1mm at 30mm/s and 3mm at 60mm/s, respectively. Each spool and box is made from recycled material, ensuring a positive impact on the environment.

1.75mm Filament Diameter    1kg Weight    30-70 mm/s Printing Speed Range    374-428°F Print Temperature Range    86-140°F Bed Temperature Range    Direct & Indirect Drive Compatible

Related Questions and Answers

Q: 1. When I remove the small Arca-Swiss plate that comes with the Joby 3K Pro Kit, the remaining Arca-Swiss clamp on top of the Joby has a spring loaded pin that interferes with my A-S plates at the bottom of all my cameras/lenses. Can that pin be removed some how?

A: It cannot be removed, unfortunately. But there are ways to deal with it. You should still be able to use all your existing arca-swiss plates if you open the clamp up all the way. Simply insert it top down rather than sliding it in and it should still accommodate your current plates. You can also tape it down using some cellophane tape or gaffer's tape to keep the safety/security pin from popping up.

Q: 2. The 3K PRO Stand does come with a 3/8 mount screw adaptor like it shows on the kit? i want to use a diferent ball head but it comes with a 3/8 female mount.

A: Yes, the reducing bushing shown will allow you to use a ball head with a 3/8" thread.

Q: 3. Does it really say Op/Tech USA in big letters on the visible side, or is this just for the ads? I think I would love this if that weren't so visible.

A: Yup, fairly visible company lettering but then, made in the USA, inexpensive so why not support them by giving a little promo since they're charging so little for these. Most photogs will know Op-tech anyhow. We US consumers are a difficult bunch to accommodate: either it's too expensive, or we're unhappy about "advertising" for a small company, or any other host of complaints. One customer suggested using a "magic marker" to black out the lettering. While I don't know what a magic marker is, a felt-tip/flow permanent marker will also work if supporting those U.S. jobs bothers you that much.

Q: 4. capacity

A: The load capacity is 6.6lbs.

Q: 5. Does the 3k Pro have the quick release feature of the 3k kit?

A: The JOBY GorillaPod 3K PRO Stand (Black/Charcoal) BH #JOJB01569 • MFR #JB01569, https://bhpho.to/338WXNx are just the legs. It does not have a quick release. The kit comes with a head and that has the quick release function.

Q: 6. will this work with a samsung nx3000?

A: Unfortunately this strap will not work on your Samsung Camera. The openings on the side of the camera are very small. You can get D Rings then the strap will work. We don't carry this type of item, but you can get at a Hardware Store. They look like very small and thin key rings.

Q: 7. Will this work out of the box with a Pentax K3?

A: Yes, this strap will be compatible out of the box with a Pentax K3.

Q: 8. Can I use on Canon R7 ?

A: Yes you can use this strap with the Canon R7.

Q: 9. Are the connections with plastic loop connectors? Is it resistant? Can you break the clasp and release the camera?

A: The loops are actually made with 1/4" tubular nylon webbing so that it's extremely strong and durable while still being flexible and easy to use. The quick release buckles are extremely strong and are tested at over 145 lbs. They can be removed from the main body of the strap by squeezing both sides of the buckle at the same time. This is ideal when doing tripod work and you don't want the entire strap hanging from the tripod. I hope that this information is helpful. Cheers!

Q: 10. Will this work with the Panasonic Lumix DMC-GX85 camera?

A: Yes it will!