With a versatile magnification range and a generous objective lens for a bright picture, the EOTech 2-12x40 Vudu X SFP Riflescope meets hunters' needs at close to medium range. Zooming is easy and accurate thanks to the removable throw lever and laser-engraved magnification ring. The DP1 reticle is illuminated with 10 brightness levels and an "off" setting in between for easy return to the right setting for the conditions. The elevation and windage turrets are capped to prevent accidental adjustment and correct the impact point by 1/4 MOA per click, with a total adjustment range of 80 MOA at 15 MOA per rotation.

Illuminated Reticle, Second Focal Plane    10 Brightness Levels with "Off" Between    30mm Maintube    80 MOA Elevation & Windage Adjustment    1/4 MOA Adjustment per Click    15 MOA per Rotation    Capped Turrets    Laser-Engraved Zoom Ring    Removable Zoom Throw Lever

• Versatile 2-12x zoom magnification for a range of common hunting scenarios
• 40mm objective lens provides the light-gathering capacity required to keep views crisp and bright during lower-light times of day or in heavy cover
• 55.7' field of view at 100 yards on 2x; 9.1' on 12x

• Placement in second focal plane keeps reticle the same size throughout the magnification range
• Duplex-style pattern with four thick crosshairs that taper to a thinner crosshair at the center for quick target framing and precision shots
• 10 brightness levels ensure the aiming point can be seen in bright daylight or in challenging light
• Off setting between levels allows easy return to preferred setting
• Runs on one included CR2032 coin cell battery

• Throw lever makes transitioning between magnifications easy and precise
• Precise 1/4 MOA impact point correction
• Wide 80 MOA elevation and windage adjustment range
• Parallax adjustment for long-range use

Related Questions and Answers

Q: 1. If I have 3 of these set up at 3 studio cameras, I would need 3 at the mixer. How would I use Talkback for the 3 operators?

A: If you connect all three Blackmagic Design 2110 IP Mini BiDirect 12G Converters to a computer via USB-C, you can use the Blackmagic Converters Setup software to rout your talkback to each operator individually or all three at once.

Q: 2. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 3. Would you be able to use two of these to create a point to point system instead of hooking into a network?

A: Yes, you can use two Blackmagic Design 2110 IP Mini BiDirect 12G Converter to create a point to point system.

Q: 4. Does it require a license to be exported like BIS???

A: Yes

Q: 5. Is this a non-CPU lens?

A: This is a CPU lens, but only for metering and manual focus.

Q: 6. Is this compatible with the Canon EOS M?

A: This viewfinder could be mounted on the Canon EOS Ms flash/accessory shoe yes. This optical finder has a field of view equivalent to 28mm on a 35mm format which is wider than then Canon 22mm kit lens is, and would only give a correlated field of view at the 18mm mark on the 18-55mm lens. So while it will fit, it is only mildly useful on the camera.

Q: 7. Would this product work with NETGEAR's SMPTE 2110 Compatible M4350 Switches? I'm trying to convert a 1080 60p camera SDI signal

A: If the NETGEAR switches are compatible with SMPTE 2110, then the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would work well, as it converts SDI to standard SMPTE-2110 IP signal. 10G Ethernet connections would be needed to connect to the device.

Q: 8. Can I connect this black magic box to an SMPTE 2110 network switch and output SDI video from it?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP has eight SMPTE-2110 SFP IP fiber ports for ingesting SMPTE 2110 signals and will then convert the signal so that it can be output as SDI.

Q: 9. Can this product convert or decode srt, tcp, rtsp transmissions from other systems? Like the teradek bond backpack or a live u?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is not able to convert or decode SRT, TCP, or RTSP transmissions. It is designed to be used in studio environments with SMPTE-2110 IP systems.

Q: 10. Would the Sigma VF-11 fit on a Fuji X-A1?

A: This viewfinder is not compatible with the Fuji X-A1.