The Polymaker 2.85mm PolyMax PC Filament provides optimal strength, toughness, heat resistance, and 3D printing quality. It prints better than other choices of PC while still having a relatively low printing temperature. With a softening point of 235.4°F / 113°C, it can operate in demanding environments where impact resistance, heat resistance, and vibrations happen.

2.85mm Filament Diameter    750g Weight    PolyMax PC Material

• Printing Temperature: 482 - 518°F / 250 - 270°C
• Bed Temperature: 194 - 221°F / 90 - 105°C
• Printing Speed: 30 - 50 mm/s
• Fan: OFF

Direct Drive

• Retraction Distance: 1 mm
• Retraction Speed: 20 mm/s

Indirect Drive

• Retraction Distance: 3 mm
• Retraction Speed: 40 mm/s

• 167°F / 75°C for 12 hours (Only if the material has absorbed moisture)

194°F / 90°C for 2 hours

Related Questions and Answers

Q: 1. I need a GPS that can connect to my Windows 8 software that does not have a Serial Port. the software I use can only detect COM 1,2,3 or 4. I see that Garmin offers a GPS that can go to Serial port. Can the combination of that and this product still allow the computer to see this as one of the above Com ports? or do you have my complete solution?

A: Once installed the Keyspan Serial Adapter will appear as a COM port on a Windows system.

Q: 2. I bought this product and works well as a microphone with iPhone. However till I unplug it the iPhone speaker is disabled so can’t hear playback. Anyway around this?

A: When any output device is connected to iOS, the built-in speaker is disabled. This is similar to when headphones are connected to your iOS device. Unfortunately, this is not not behavior which can be altered at this time, but we do hope Apple changes this in the future.

Q: 3. What size Protecting Cloth should i get for the Canon SL2, the 14.6 x 14.6" or 19.7 x 19.7"?

A: If one is using the Canon SL2, connected to a short kit lens, (18-55mm) or a short prime lens (50mm) then the 14.6" x 14.6" would be good, But if one uses a longer "zoom" lens,, such as a 70-300mm, or a 100-400mm lens then the 19.7" x 19.7" protecting cloth would work better.

Q: 4. How do i use this mic with a iPad Pro 2018 with USB C port? Thanks!!!

A: The iRig Mic Studio would use the cable below to connect to USB-C devices like the iPad Pro 11" 2018 (USB-C). Any other third party OTG compatible cable with these connections should also work. https://www.ikmultimedia.com/products/?A=usb-c-microusb-cable

Q: 5. I am using the mouse roller to scroll the text. It is not smooth. How can the text be scrolled smoothly?

A: other mouse style USB controllers such as a touch pad may also be use to scroll through the text

Q: 6. Does this come with a power supply and does it have battery power?

A: Threre is no battery power. In the Box: Mackie CR StealthBar Desktop PC Soundbar with Bluetooth Power Adapter Set of Alternate Feet USB Cable (Type-A to Type-C) 3.5mm TRS Audio Cable Limited 1-Year Warranty

Q: 7. Can you easily turn the speaker lights OFF?

A: Yes, the LED lights on the Logitech G560 LIGHTSYNC PC Gaming Speakers can be dimmed down from 100% to 0% by pressing the G-Key button four times.

Q: 8. Can I use this adapter with the godox x1t-c trigger on top?

A: You can use this to use a Godox transmitter with a pc sync.

Q: 9. Will Filmic Pro recognize the mic in iPhone / Android?

A: Yes. Once a microphone is connected to iPhone, the audio is then from the external mic.

Q: 10. Is this printer compatible with Apple iOS?

A: Yes, the printer will work with Apple OSX. It would be good to check the manufacturer's web site. If I recall correctly, there is some software loaded on the printer that supports basic label creation and printing. There is a more extensive printer application that can be downloaded for the PC. I am not sure if it is available for download for the Mac.