Upgrade the memory in your 2013 Mac Pro (MacPro6,1) using the 96GB DDR3 1333 MHz RDIMM Memory Kit from OWC / Other World Computing. This memory kit features a total capacity of 96GB, which is made of up three 32GB modules. It also has a clock speed of 1333 MHz, a bus speed of PC3-10600, and a 240-pin RDIMM form factor. It operates using 1.5V, has a CAS Latency of 9-9-9-24, a module bandwidth of 10.6 GB/s, a component configuration of 2048M x 72, is registered, and is equipped with ECC technology. Registered memory places less electrical loads on the memory controller and allows single systems to remain stable with more memory modules than they would have otherwise. By offering ECC (Error Checking and Correcting) technology, this RAM will help your workstation encounter fewer errors that can corrupt data sets and introduce system issues. Additionally, this memory module is compatible with Apple Specified Thermal Sensor, which ensures that the RAM maintains a safe thermal operating range.

Note: Due to processor design and memory architectures, 32GB module utilization occurs at a bus speed of 1066 MHz with Apple Mac Pro 2013 E5-16XX v2 Four-Core, Six-Core, and Eight-Core processor-equipped models, and 800 MHz with factory 12-Core or after-market E5-26XX equipped models. Utilization of a minimum of two or more 32GB modules is recommended and utilization of overall performance with applications and workflows able to utilize higher available memory remains exceptional.

96GB (3 x 32GB) Capacity    1333 MHz Clock Speed    PC3-10600    240-pin RDIMM    1.5V    CAS Latency 9-9-9-24    ECC, Registered    Apple Thermal Sensor Compatible    Module Bandwidth: 10.6 GB/s    Compatible with the 2013 Mac Pro

Each 32GB module has a bandwidth of 10.6 GB/s and a voltage of 1.5V

Compatible with 2.7, 3.0, 3.5, and 3.7 GHz models of the Mac Pro (Late 2013) with model identifier MacPro6,1

ECC, Registered

Related Questions and Answers

Q: 1. will these work in a Mac Pro mid-2010 - 2 x 2,4 GHz Quad-Core Intel Xeon ?

A: Hi, is that workin with macPro 5.1 ?

Q: 2. Will these Mac kits work in a PC desktop with the same number of pins?

A: As these chips contain specific features for Apple compatibility, such as Apple Specified Thermal Sensor. This may or may not prevent the chip from working in a PC.

Q: 3. Do these have heat spreaders attached?

A: The RAM chips in this kit have heat sinks attached to them.

Q: 4. Is this RAM compatible with this specifications?- PC3-10600E, 1333 MHz, DDR3 SDRAM UDIMMs and RDIMMs- Error-correcting code (ECC)- 72-bit wide, 240-pin ECC modules- 36 ICs maximum per ECC UDIMMIt's a mid 2012 12 core MACPROThanks

A: I put mine into a 2010 MacPro and it works perfectly

Q: 5. Can i use this in my Asus motherboard that support DDR3 133MHz?

A: The RAM is compatible with Intel / AMD Process based PCs capable with the specifications listed above. Memory complies with JEDEC Specifications, document JESD79-3B

Q: 6. Is it compatible with 2009 Mac Pro?

A: This would not work, I would suggest this 4GB option, please see link: a href= http://bhpho.to/1xLB0tY target= _blank http://bhpho.to/1xLB0tY/a

Q: 7. dose it work with the hp 2000-2d19wn?

A: No, it is not the correct memory, it is too slow.

Q: 8. Will this RAM work on my Mac Pro (early 2009) 2x2.6GHz Quad-Core Intel Xenon?

A: Yes it certainly will. I have a new Mac Pro but the old version (early 2009) is still working with this memory upgrade.

Q: 9. it fits in IMAC 11.1 later 2009 ddr 1333 ?

A: I bought for my Macbook Pro early 2011 model # 8.1. Going from 8gb to 16gb improved performance even more than I expected. I cannot vouch for compatibility for any other model of Macbook Pro.

Q: 10. I have a RAM with error among 4x32GB. Can I replace just one?

A: They should be replaced in pairs.