The Nightstick LGL-170A Long-Gun / Carbine Weaponlight Kitoffers a powerful output with flexible mounting and switching options. It provides an array of configurations to match your shooting style and loadout.

Included are straight and 45° angled Picatinny rail mounts so you can place the light on your rifle's forend exactly where you need it, without it interfering with scopes or reflex sights, BUIS, lasers, or other peripherals. Its single LED emitter outputs a darkness-piercing 1500 lumens of blinding light that is ideal for searching and clearing rooms. It's controlled by a conventional push button tailcap switch, or you can swap it for the included remote pressure switch. The remote switch has a 6" cable and comes with a wire management clamp to keep the wire tight to the rail and eliminate snag hazards.

Built for daily use, the housing is made from lightweight and durable 6061-T6 aluminum alloy and treated with a scratch-resistant, black anodized finish. It is O-ring sealed to an IPX7 rating, making it waterproof and submersible to a depth of over three feet for up to 30 minutes. To withstand shocks, recoils, and the rigors of action the light is impact-rated to handle drops from heights of almost seven feet. Measuring five and a half inches and weighing seven and a half ounces, the LGL-170 won't add excessive weight or bulk to your rifle.

Adding to its versatility is a dual power capability. It will run on the included rechargeable 20700 li-ion battery or two user-supplied CR123 batteries. If you choose to use CR123 batteries, the output will drop to 1200 lumens. A charging cradle and USB power cord are also included.

Single 1500-Lumen Output    Powerful White LED Emitter    Tailcap and Remote Pressure Switches    Choose the Switch Style That Works Best    Momentary and Constant-On Activation    IPX7-Rated, Waterproof, and Submersible    Anodized 6061-T6 Aluminum Housing    Standard and 45° Picatinny Rail Mounts    Runs on One Included Li-Ion Battery

• Single 1500-lumen output illuminates large areas—ideal for clearing rooms and searches
• Powerful and reliable white LED emitter and a smooth reflector produces a clearly defined beam with a bright center cone of light and generous spill
• Runs on one included 3.6V 3400mA rechargeable li-ion battery
• One-bay charger and USB cable included
• Capable of running on two user-supplied CR123 batteries, but max output drops to 1200 lumens

• Momentary and constant-on activation modes
• Removable tailcap switch, enables easy one-finger activation when light is mounted near the support hand or for use as a conventional handheld flashlight
• Remote pressure pad switch with 6" cable and wire management clamp enables safe use without having to remove your support hand from the forend

• Flexible mounting options enable perfect placement for safe and effective use with or without the remote pressure switch
• Standard reversible Picatinny rail mount allows the light to be mounted on forend rails
• 45° Picatinny rail mount sets the light off the center line of the rail to avoid interference with optics, lasers, iron sights, or other mounted accessories

• Durable and lightweight 6061-T6 aluminum alloy housing
• Scratch-resistant black anodized finish
• Impact resistant against drops of up to 6.6'
• IPX7-rated to be waterproof and submersible to a depth of 3.3' for up to 30 minutes
• Measures 5.5"
• Weighs 7.5 ounces 

Related Questions and Answers

Q: 1. Is this compatible with Rycote Connbox 4 for Single Shank Stereo Microphones with 5-Pin XLR? (I have the AT BP4025 stereo mic)

A: No, the Rycote Nano Shield Windshield Kit is not compatible with Rycote connboxes.

Q: 2. Which rain cover size would suit this (e.g. which Rycote Duck Rain Cover, or which Remote Audio Rainman)?

A: You can use the Rycote Duck Rain Cover for Modular and S-Series Windshield Systems (B&H # RYDUCKWS4) with the Rycote Nano Shield Windshield Kit NS5-DC for Microphones up to 11.2" Long.

Q: 3. Will this work for the Hero8 ?

A: I am am afraid it will not fit the Go Pro Hero 8 Black action camera.

Q: 4. Hi,can this case fit the Leica digilux 3 with 14-50mm lens?

A: Unfortunately this case will not accommodate that set up. My apologies. It's dedicated for the Leica M Body with the 80mm lens only.

Q: 5. The handle bottom is not threaded and so It's unclear how to mount this on to a boom pole??

A: There is a thread on the bottom of the shock mount that will mate with any standard bom pole threading.

Q: 6. May I have the case dimensions?

A: The Leica Neoprene Case with Long Front dimensions are 6 x 4.5". Please keep in mind that the material is stretchable.

Q: 7. what are the red plastic rings for?

A: The red rigid bands that are included with the Rode Long Shotgun Blimp Extension Kit are for use with shotgun microphones that have a narrow diameter (less than 22mm). The bands help to provide a more secure fit in the lyre clips for the shock mount.

Q: 8. How can you clean the EagleEye system? It seems mine has lint in it because the image is no longer crisp (both the GoPro and lenses are clean).

A: Ckean as you would any optical instrument with microfiber cloth and brush.

Q: 9. Would this fit the x100v with lens hood?

A: The FUJIFILM X100V does not fit the Long Weekend Camera Pouch (Black) with the lens hood. Without the lens hood, the camera fits perfectly.

Q: 10. Can I mount my F38 plate on this base?

A: The Falcam F50 Long Quick Release Kit does not work with the F38 ecosystem from Falcam. Please see the following link for compatible plates: https://bhpho.to/4ed3BnO.