The AR-1X Red Dot Sight from Burris Optics is designed as a 1x magnification optical sight with a Ballistic CQ 1X black reticle engraved into the prism, allowing it to be used without illumination. For low light, the reticle features user selectable red and green illumination. The reticle features a horizontal split bar, central dot, and hashmarks below the dot for precise trajectory compensation out to 600 yards. The optics are anti-reflective and fully multicoated and the scope is protected by tethered turret caps and flip-up lens covers. The illuminated sight is powered by a AA battery that gives over 5000 hours of use.

Ballistic CQ 1X Red Dot Reticle    1/2 MOA per Click Shot Correction    60 MOA Windage/Elevation Adjustment    Nitrogen-Filled, Waterproof    Black Reticle Etched Directly into Prism    Red and Green Illumination    Multicoated Optics    Anodized Aluminum Housing

• 1x magnification
• Anti-reflective fully multicoated optics minimizes light loss, and maximizes contrast and color transmission

• Close quarters (CQ) 1X reticle etched into prism
• Outer donut for fast close quarter target acquisition and tracking
• Horizontal posts with a center dot
• Ballistic-drop compensation hashmarks for elevation adjustments out to 600 yd

• Red/Green illuminated reticle
• 1/2 MOA per click impact point correction
• 60 MOA windage and elevation adjustment range
• Tethered caps, flip-up lens covers

• Single-piece aluminum housing
• Nitrogen-filled, waterproof
• Low-glare, scratch and corrosion-resistant matte-black anodized finish
• 1.6" height above rail to optic centerline

Related Questions and Answers

Q: 1. Is this scope magnified ? If so to what power?

A: The Burris Optics FastFire III 8-MOA Red-Dot is 1x magnification.

Q: 2. Does this bag come packed flat to be accomodated in a suitcase?

A: When I travel i put my gear in an airline size hard case with wheels. I pack my Domke bag in my luggage but stuff it with underwear and toiletries. No need to flatten it.

Q: 3. The olive version has different interior dimensions in the specs than the other colors - which are accurate?

A: I have an older (25 years older) version and the interiors seem very close in size. I have not put a tape to it, but they look the same.

Q: 4. parallax correction down to what distance?

A: The Fullfield E1 has an adjustable side turret. Parallax:50 yds. infinity

Q: 5. Is this optic Gen 1 or Gen 2? Serial # above 89k or no?

A: Yes this is a Gen 2 Trijicon 1x25 MRO Reflex Sight. You can tell by the MFR # 2200003 on our website. You will find the same number on the Trijicon website MRO-C-2200003. The 89k serial numbers that you are asking about sold through about a year and a half ago. They aren't even around anymore.

Q: 6. Can this be mounted on a camera's hot shoe?

A: There is no hot shoe or adapter mount available.

Q: 7. How weather resistant is this bag?

A: is manufactured from cotton canvas that is naturally water-resistant, but which is a 'breathable" fabric so the air in the case stays dry even in humid environments. However, the manufacturer does not list a specific weather rating or IP rating for the case. It should be okay for use in light or moderate rain or snow and in humid conditions.

Q: 8. Will it fit on a S&W M&P pistol?

A: I purchased the FastFire III w/picatinny mount, but ended up removing the Picatinny and purchasing the mount specific to my Ruger Mark III. Much cleaner lower profile installation. I believe there is a S&W mount. Threaded portion slides into dovetail then mount attaches with 2 or 3 screws. Easy..no gunsmith required.

Q: 9. This bag comes with a padded foam insert with 4 partitions. I need to replace mine. Does anyone know which model name/number this padded insert is?

A: The Domke FA-240 4-Compartment Insert, BH # DOFA240 would fit the F-1X Shoulder Bag. https://bhpho.to/3QFTDjr

Q: 10. how to adjust scope to move to the right?.elavation is correct

A: You would adjust the right and left on the mount itself.