The Stewart Filmscreen BALG3E120CFHG5FLMX Balon Edge Series Projection Screen is an ultrawide 2.40:1, 120" diagonal, fixed frame projection screen, and it features Stewart Filmscreen's FireHawk G5 Perforated screen material that is ideal for standard to long-throw projector applications involving the presence of ambient light.

Featuring a half-inch black Velux border, low-profile depth, and flush-mount bracket, the Balon Edge series provides high-quality imaging in a stylish package. The FireHawk G5 surface was designed to provide the best possible trade-off between image fidelity and ambient light resistance. With Stewart's Microperf X² THX Ultra technology, the screen is acoustically transparent, so you can hide your speakers behind it with minimal impact to sound and picture. This screen has a 1.1 gain with 73% ambient light rejection, and it works best with high-powered projectors that have a minimum 1.6:1 throw ratio.

Cinema Widescreen 2.40:1 Aspect Ratio    120" Diagonal    Thin 0.5" Balon Edge Fixed Frame    Perforated FireHawk G5 Screen Material    Acoustically Transparent Screen Surface    Works with Minimum Throw Ratio of 1.6:1    1.1 Screen Gain    73% Ambient Light Rejection    Low-Profile Depth of Less than 1.5"    Flush-Mount Bracket Included

The frame construction makes attachment of the screen material easy and intuitive. From the front, all you'll see is a half-inch black Velux border, providing a crisp, sharp image. The back hides all the material, leaving a clean and tidy finish.

Stewart’s Microperf X² THX Ultra technology provides a specialized diamond-shaped perforation pattern, oriented to eliminate moiré. There are over 30,000 precision perforations per square foot; each hole is a mere twenty-thousandths of an inch in diameter. This provides optimal balance via minimal impact on sound, reasonable opacity, and rejection and absorption of reflected light from behind.

The new Flush-Mount bracketing system makes hanging the Balon screen quick and easy. The brackets are made to keep the back of the screen's surface next to the wall. With the tight fit to the wall, there is no worry about optional LED lighting washing out the image on the screen.

Related Questions and Answers

Q: 1. Will it work with a Sony RX0 ?

A: Probably if you can get it clamped properly.

Q: 2. Will these antenna work with various brands of radio receivers? E.g. if Im running both Lectros and Sennheiser

A: Yes! It's brand agnostic.

Q: 3. What is the diameter of the tripod collar mount on the lens?

A: When fully loosened, the inner diameter is 86mm where it accepts the Sigma lens' collar pin. Outside of the groove, it is 83mm.

Q: 4. Is it okay to keep it in the rain or should the antenna be covered with a plastic bag?

A: The Lectrosonics ALP620 Perforated LPDA Shark Fin Style Antenna is not IP-rated; therefore, it cannot be left out in the rain. Using a plastic bag or rain cover to protect it will actually affect the wireless range of the antenna, making it prone to RF interference.

Q: 5. Does that fit the Sigma 100-400 contemporary for Sony E?

A: This is compatible with the Sigma 100-400mm f/5-6.3 DG DN OS Contemporary Lens for Sony E.

Q: 6. What's the difference between the new Sigma TS-111 Tripod Socket (MFR#ATC900) and the old model (MFR#2597ZN)?

A: Nothing different. It's the same collar. One came with the 105mm 1.4 (older one) the newer one is for the Sigma 100-400. But buying either one would work on either lens.

Q: 7. Will theses work with gopro hero 3+?

A: Yes it will work with a hero 3+

Q: 8. What is the maximum weight that this will work with?

A: A maximum weight is not listed for this product. However it works with the Sony AS50 & X1000 Action Cameras. Cameras with a similar weight and size to those cameras should work as well. However, this product is no longer available. For assistance finding the right product for your needs feel free to email us directly at askbh@bhphoto.com.

Q: 9. Does this need a special plate to attach to Wimberley Mono Gimbal head-MH-100? Can I use a FLM 50 or 40 arc plate if one needed?

A: The Sigma TS-111 works as an arca-swiss compatible tripod foot and will fit in any arca-swiss clamp. Depending on your set-up, you might need a longer plate to balance it on a gimbal head, although with the MH100 you shouldn't have much issue. Yes, you can use those plates if necessary, but there isn't much benefit to using them in this case.

Q: 10. What does "Center Perforated" mean? How does this feature differ from the "Standard Version"?

A: Center Perforated, on this DNP 4 x 6" Center Perforated Media Set for DP-QW410 Professional Photo Printer, is referring to the paper being Perforated. This way the print can be cut/ torn.