The Stewart Filmscreen BALG3E120CST13G4FLMX Balon Edge Series Projection Screen is an ultrawide 2.40:1, 120" diagonal, fixed frame projection screen, and it features Stewart Filmscreen's StudioTek 130 G4 screen material that is THX certified as the reference standard projection material within the AV industry.

Featuring a half-inch black Velux border, low-profile depth, and flush-mount bracket, the Balon Edge series provides high-quality imaging in a stylish package. The StudioTek 130 G4 surface was designed to provide crisp, sharp focusing of content, as well as superb color and outstanding white field uniformity with less sparkle than previous versions. With Stewart's Microperf X² THX Ultra technology, the screen is acoustically transparent, so you can hide your speakers behind it with minimal impact to sound and picture. This screen has a 1.3 gain with 17% ambient light rejection, and it works best in light-controlled environments with HDR capable projectors that have a minimum 1.3:1 throw ratio.

120" Diagonal | 2.40:1 Aspect Ratio    Perforated StudioTek 130 G4 Material    1.3 Screen Gain    Thin 0.5" Balon Edge Fixed Frame    Acoustically Transparent Screen Surface    THX Certified    HDR Capable    Works with Minimum Throw Ratio of 1.3:1    Low-Profile Depth of Less than 1.5"

The frame construction makes attachment of the screen material easy and intuitive. From the front, all you'll see is a half-inch black Velux border, providing a crisp, sharp image. The back hides all the material, leaving a clean and tidy finish.

Stewart’s Microperf X² THX Ultra technology provides a specialized diamond-shaped perforation pattern, oriented to eliminate moiré. There are over 30,000 precision perforations per square foot, and each hole is a mere twenty-thousandths of an inch in diameter. This provides optimal balance via minimal impact on sound, reasonable opacity, and rejection and absorption of reflected light from behind.

The new Flush-Mount bracketing system makes hanging the Balon screen quick and easy. The brackets are made to keep the back of the screen's surface next to the wall. With the tight fit to the wall, there is no worry about optional LED lighting washing out the image on the screen.

Related Questions and Answers

Q: 1. I have a Nikon D5, 70-200 lens w/ 2x converter. Is it going to fit? Thx

A: No, the unit will not provide a good fit for the following pieces mentioned

Q: 2. does this fit a Nikon P950?

A: Yes the Nikon D950 will fit inside of this but it does not fit will and it strains the zooming motor when it tries to zoom in and out.

Q: 3. Will this fit a canon 1Dx MarkIII with a 100-400mm lens?

A: The camera is about 1/2" too high, all the other dimensions look good. It is a silicone material so it may stretch out to accommodate the camera's height.

Q: 4. Will this work on the peak design tripod?

A: Sigma TS-111 Tripod Socket Kit BH #SIATC900 will work on the peak design tripod.

Q: 5. What does "Center Perforated" mean? How does this feature differ from the "Standard Version"?

A: Center Perforated, on this DNP 4 x 6" Center Perforated Media Set for DP-QW410 Professional Photo Printer, is referring to the paper being Perforated. This way the print can be cut/ torn.

Q: 6. can you split the screen between input sources?

A: The LG UltraWide 25.7" HDR Monitor (BH #LG26BQ500B), does not support PBP or PIP.

Q: 7. I will be going whale watching and have a Nikon D850 and nikkor 80-400. Will this combination fit and is there enough slack in the bag to use the zoom? thank you

A: The D850 and 80-400mm lens are already weather sealed and can be used in a mild rain or sea spray. The Outex is designed more for submerging a camera and lens into water and does not allow for much zoom control. If you want to add a little extra rain protection for above water use (such as on a boat) I would recommend this Ruggard Rain Cover: https://bhpho.to/3yR0tv0

Q: 8. Does it diminish photo quality and is this a good cover when kayaking?

A: The Outex 130 Underwater Camera Cover (Large) requires a front and rear glass. It will not degrade image quality and is one of the better bag underwater housings. For help to see what front and rear glass is required for your camera and lens email us at uw@bhphoto.com.

Q: 9. I assume it would also fit the L Mount of the same lens?

A: Hi Liz! Yes, the TS-111 is compatible with the new DN-versions of the 100-400 (which have a new collar design unlike the original 100-400mm DG lenses), both the E-mount and L-mount models.

Q: 10. What size case for a Sony a7riii with a Sigma 28-70mm 2.8 lens?..thanks

A: The Outex 100X Underwater Camera Cover (Small) will fit a Sony a7riii with a Sigma 28-70mm 2.8 lens.