6.2 Cubic Feet Washer Front Load

Camvate Mini Tabletop Tripod With Ball Head And Quick Release Plate

Product Code: ga156869
Availability: In Stock

$140.40 $195.16

Qty

10 reviews Write a review

Description
Reviews (10)

The Mini Tabletop Tripod with Ball Head and Quick Release Plate from CAMVATE is designed for DSLR, mirrorless, and action cameras via a 1/4"-20 thread. The tripod adjusts to a maximum height of 6.2" and offers a 90° tilt with 360° rotation. The featured ball head allows for quick orientation adjustment and the drop-in plate gives you the ability to quickly attach and detach your camera. Additionally, this Mini Tabletop Tripod features two bubble levels and nonslip rubber feet for added stability.

Maximum Height: 6.2" 360° Rotation, 90° Tilt 1/4"-20 Threaded Camera Mount Rubber Feet Two Bubble Levels Aluminum Construction

Key Specs
Camera Mounting Screw	1x 1/4"-20 Male
Head Type	Ball Head
Primary Material	Aluminum
Load Capacity	Not Specified by Manufacturer
Maximum Working Height	6.2" / 15.7 cm
Closed Length	Not Specified by Manufacturer
Weight	0.9 lb / 425 g
Parameters
Camera Plate	Quick Release: Proprietary
Head
Head Type	Ball Head
Pan & Tilt
Vertical Tilt	90°
Lateral Tilt	No
Legs
Primary Material	Aluminum
General
Load Capacity	Not Specified by Manufacturer
Maximum Working Height	6.2" / 15.7 cm
Minimum Working Height	1.8" / 4.6 cm
Closed Length	Not Specified by Manufacturer
Bubble Level	Yes
Weight	0.9 lb / 425 g

Related Questions and Answers

Q: 1. Will this fit on the manfrotto 290 extra tripod?

A: Yes, the threaded fitting on top is the correct size

Q: 2. is this ball head compatible with A2190T Benro Tripod?

A: Yes it will

Q: 3. Does the plate have 2 separated set screws or they are CNCed like some reviews complaint about?

A: The Kirk Tripod Head Quick Release Plate (Large) comes with one set of screws, or two screws (one small and one big) in total.

Q: 4. I use my Canon 80D for videos once in a while. Will this work as a video pan?

A: No, this would not be good for video. You are much better off getting a video head or you can get a hybrid head for both. Click the link below to view; https://www.bhphotovideo.com/c/product/760106-REG/Manfrotto_MH055M8_Q5_MH055M8_Q5_Photo_Movie_Tripod_Head.html?sts=pi&pim=Y

Q: 5. Is this compatible with the induro baby grand?

A: If it's a generic tripod head connector then yes.

Q: 6. Is it compatible with Arca Swiss style clamp?

A: Yes.

Q: 7. Is this available in a left hand version so that I can adjust and shoot quickly with my right hand? Sounds funny but my ballhead adjusts on the left side......

A: This grip is customizable to be usable with either one's left or right hand.

Q: 8. What is the base diameter of this ballhead?

A: The base diameter is is 1.45 inches.

Q: 9. Hello guys! A few years ago I bought the Benro Tripod TAC008AP0 and now I need replacement for the quick release. Can you check if this PH01 is the right one for me? Thanks a lot!

A: Yes, the Benro PH01 Quick Release Plate for BR0E Ball Head should be the correct quick release plate for use with the Benro P0 3-Way Pan/Tilt Head used on your tripod.

Q: 10. Is this arca Swiss compatable?

A: The Syrp Quick Release Plate for Genie Ballhead is compatible with arca-type compatible quick releases, including the one on the Syrp Ball Head for Genie https://www.bhphotovideo.com/c/product/1049515-REG/syrp_0012_8001_camera_accessory_for_mounting.html

Eli	21/09/2024
The 'Joystick' nature of this ball head is just that; & together w/the quick release adaptere; it is a great tool. You can switch the orientation to other than the default side; or put it on vertically. Just be sure to hold on to the little tools they give you... & watch the rubber inserts for the holes when changing orientation, it is a tight fit. I love my Manfrotto 322RC ball head! 5

anyonymous	12/09/2024
very well built and fast. 5

anyonymous	04/09/2024
Got it along with the Manfrotto 055xpro tripod and love it. I'm a novice photographer looking for a good quality but reasonably priced set-up for my Nikon D90. Couldn't be happier with decision. 5

Eric B	06/08/2024
Excellent Performance even with large heavy camera. Was recently on a Leica Destinations Photo Course. Had the opportunity to use this with the S2. Not a small camera. Worked flawlessly. Easy and comfortable to use. 5

Yak Driver	22/07/2024
This is used on my carbon fiber tripod for DSLRs and 35mm film cameras. I may use it for my RB-67 also. I have enjoyed the stick grip on my monopod and this is a great performer so far. It is a bit heavy on the carbon fiber tripod and makes the assembly a bit top heavy, but has caused no issues yet. 5

anyonymous	13/07/2024
I love this ballhead because it makes adjusting my camera for photographs really easy. You can quickly change the position from horizontal to vertical and the joystick glides around to any angle. 5

Julia	12/06/2024
I love this tripod head, I've been using it for over 10 years, this is my second one, my tripod has needed repair but the head is still solid. I've used it for weddings, corporate events and now volume school photography and this thing is still going strong. Buying a second for my second tripod. Highly recommend. It's the most comfortable and easy to use head I've owned. 5

anyonymous	08/06/2024
Hooked up to a Manfrotto monopod this is a shooters dream. Once used to it, nothing can compare. No missed shots, no blurry shots. I should of done this a long time ago. 5

anyonymous	03/06/2024
Grips tight upon release 5

kennjedd	30/11/-0001
I use the grip primarily on a monopod to take pictures of my son's baseball games. It is easy to switch between portrait and landscape type of pictures. The grip fits both my monopod and tripod. 5