With a versatile magnification range and a generous objective lens for a bright picture, the EOTech 2-12x40 Vudu X SFP Riflescope meets hunters' needs at close to medium range. Zooming is easy and accurate thanks to the removable throw lever and laser-engraved magnification ring. The BD1 reticle is illuminated with 10 brightness levels and an "off" setting in between for easy return to the right setting for the conditions. The elevation and windage turrets are capped to prevent accidental adjustment and correct the impact point by 1/4 MOA per click, with a total adjustment range of 80 MOA at 15 MOA per rotation.

Illuminated Reticle, Second Focal Plane    10 Brightness Levels with "Off" Between    30mm Maintube    80 MOA Elevation & Windage Adjustment    1/4 MOA Adjustment per Click    15 MOA per Rotation    Capped Turrets    Laser-Engraved Zoom Ring    Removable Zoom Throw Lever

• Versatile 2-12x zoom magnification for a range of common hunting scenarios
• 40mm objective lens provides the light-gathering capacity required to keep views crisp and bright during lower-light times of day or in heavy cover
• 55.7' field of view at 100 yards on 2x; 9.1' on 12x

• Placement in second focal plane keeps reticle the same size throughout the magnification range
• Ballistic circles for 2, 4, 6, and 8 MOA holdover
• 10 brightness levels ensure the aiming point can be seen in bright daylight or in challenging light
• Off setting between levels allows easy return to preferred setting
• Runs on one included CR2032 coin cell battery

• Throw lever makes transitioning between magnifications easy and precise
• Precise 1/4 MOA impact point correction
• Wide 80 MOA elevation and windage adjustment range
• Parallax adjustment for long-range use

Related Questions and Answers

Q: 1. Can I connect this black magic box to an SMPTE 2110 network switch and output SDI video from it?

A: Yes, the Blackmagic Design 2110 IP Converter 8x12G SFP has eight SMPTE-2110 SFP IP fiber ports for ingesting SMPTE 2110 signals and will then convert the signal so that it can be output as SDI.

Q: 2. What’s the latency?

A: Generally, the expected latency of the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would be about 2 frames, but if the signals are gen-locked, the latency would then decrease to just a few lines of resolution.

Q: 3. Does it have weather sealing gasket?

A: Yes it does according to the information provided by Zeiss.

Q: 4. What are the dimensions of this lens with the hood? I want to purchase a lens case for it, and all I can find are the lens dimensions w/out the hood.

A: The lens shade is reversible for storage, so you can use the dimensions that 'include lens caps' which are listed on the data sheet at: a href= http://www.zeiss.com/content/dam/Photography/new/pdf/en/downloadcenter/datasheets_milvus/milvus1485.pdf. target= _blank http://www.zeiss.com/content/dam/Photography/new/pdf/en/downloadcenter/datasheets_milvus/milvus1485.pdf./a

Q: 5. Would this product work with NETGEAR's SMPTE 2110 Compatible M4350 Switches? I'm trying to convert a 1080 60p camera SDI signal

A: If the NETGEAR switches are compatible with SMPTE 2110, then the Blackmagic Design 2110 IP Mini BiDirect 12G Converter would work well, as it converts SDI to standard SMPTE-2110 IP signal. 10G Ethernet connections would be needed to connect to the device.

Q: 6. Can this converter perform the same functions as the Blackmagic Design Studio Converter (just for 8 cameras instead of one) ?

A: No, the Blackmagic Design 2110 IP Converter 8x12G SFP does not sever exactly the same purpose as the Blackmagic Design Studio Converter (BH #BLSCN). The Blackmagic Design Studio Converter can intake a signal via 10G Ethernet, which provides power and tally/coms support, where as the Blackmagic Design 2110 IP Converter 8x12G SFP is a signal convertor for sending 8 camera feed over longer distances, so the inputs are SDI can the SFP ports are for transmission to a receiver.

Q: 7. Will this work with the original BMD Studio Camera 4k Pro (Non G2) using its 10g ethernet?

A: The Blackmagic Design 2110 IP Mini BiDirect 12G Converter is listed as supporting Supports all SD, HD, and UHD standards up to 2160p60.

Q: 8. Is this lens (MFR #2096-550) compatible with Nikon D7000? The compatibility list shows D7100 and D7200 so I assume it is, but wanted to be sure.

A: Yes. Due to its manual-only design, this will work with most Nikon DSLRs. :)

Q: 9. Can I use 3 of these on camera end with a 2110ip 3X3G on mixer's end using a switch like the one you offer or any 10g switch?

A: Yes, multiple Blackmagic Design 2110 IP Mini BiDirect 12G Converters can be connected to a mixer via network switch, your video mixer would just have to support 2110 IP video input to ingest the signals.

Q: 10. Would you be able to use two of these to create a point to point system instead of hooking into a network?

A: Yes, you can use two Blackmagic Design 2110 IP Mini BiDirect 12G Converter to create a point to point system.