The ENG/AL2 MS Aluminum Tripod from Camgear is a sturdy and durable 2-stage aluminum tripod designed to withstand payloads of up to 165.3 lb. It boasts a 100mm bowl diameter and is extendable from 20.5 to 59.6". The unit comes with an MSP-2 mid-level spreader and a set of three RF-1 rubber feet.

165.3 lb Payload Capacity    Extendable from 20.5 to 59"    Folded Length: 28.3"    2-Stage Aluminum Tripod    100mm Bowl Diameter, RF-1 Rubber Feet    MSP-2 Mid-Level Spreader Included    Weighs 11 lb

Related Questions and Answers

Q: 1. Does it come with a camera plate and is that plate manfrotto style or proprietary?

A: The Sachtler Sideload Plate S/Ace Tripod QR Plate is only compatible with the aktiv6, aktiv8, aktiv10, FSB 4, FSB 6, FSB 8, FSB 6 Mk II, FSB 8 Mk II, FSB 10, FSB 10 Mk II, and Ace fluid heads.

Q: 2. How does this tripod/head perform in harsher conditions? Sand, salt water, cold temperatures?

A: Sachtler aktiv8 flowtech75 MS Tripod System has been tested and preforms well in all conditions, after contact with salt water, I suggest washing and drying it down.

Q: 3. Does the pan bar slip when tilting up and down on the activ 6 head? I had a bad experience with an FSB 8T head doing just that, because Sachtler made the teeth too shallow for the pan bar to grip the rosette properly.

A: Fully functional Sachtler heads do not slip. What you described sounds like a defective or damaged tripod head. In a situation like that we recommend exchanging the tripod for a working model if within the return policy or contacting Sachtler to get the tripod head serviced. It is unfortunate that your previous experience with Sachtler was negative as they are known for making excellent tripod heads. It is unlikely that you will have the same experience with the Aktiv 6 head but in case you do contact us immediately and we will do what we can to make sure that you get a functional tripod head.

Q: 4. Can you use this without the spreader?

A: Yes, this tripod can be used with out the spreader.

Q: 5. How low can the Aktiv 6 go? Could it go down to the ground like the Aktiv 8?

A: Yes, the legs on the Sachtler aktiv6 flowtech75 MS Tripod System (BH #SAS2064SFTMS • MFR #S2064S-FTMS) can be spread upwards similar to the Aktiv8 to achieve a minimum working height of 10.24" / 26 cm.

Q: 6. What arri dovetail plate is compatible with the aktiv line?

A: When working with Arri Dovetail plates they should all be universally compatible for mounting on the Sachtler Aktiv heads. Dovetail plates have multiple 1/4"-20 & 3/8"-16 Threads to allow you to attach the Aktiv head plate to the dovetail plate. Also, if you are looking for a replacement plate for the Aktiv8 head it is listed below. Sachtler Sideload Plate S/Ace Tripod QR Plate BH #SAWPDV1

Q: 7. Thank you Sachtler rep. With the Sideload plate, when I go from tripod to handheld does the Sideload plate go with the camera adding weight and interfering with a proper grip? Does it detach like the traditional Sony plate? I will be purchasing for use with the Sony FX6.

A: The Sachtler aktiv8 Sideload Fluid Head, which differs from the Sachtler aktiv8T Touch & Go Fluid Head, features a quick release plate, that would normally remain on the camera, when releasing it from the head. It will attach with 1/4"-20 or 3/8"-16 screws,

Q: 8. Has anyone used the Aktiv8 for long lens (500mm+) videography? at that focal length can you achieve shake-free pans?

A: The Sachtler aktiv8 flowtech75 MS Tripod System, will easily perform shake free pans with long lenses and heavy systems.

Q: 9. Would this be suitable for a red Gemini and EF 200-400mm 1.4x?

A: The Sachtler aktiv6 flowtech75 MS Tripod System (B&H# SAS2064SFTMS) could be used with the RED DIGITAL CINEMA DSMC2 BRAIN with GEMINI 5K S35 Sensor (2018 Unified DSMC2 Lineup) (B&H# REDSMC2G5K) and the Canon EF 200-400mm f/4L IS USM Extender 1.4x Lens (B&H# CA2004004IS). That is because the combined weight of those two items is below the maximum load capacity of the tripod and head. However, given their significant length, it will be important to balance their weight and center it on the head. If you need a slightly longer quick release plate to do so then you can use the compatible Manfrotto Quick Release Camera Plate (7") (B&H# MA504PLONGRL). It is 1.5" (3.8cm) longer than the Sachtler Sideload Plate S/Ace Tripod QR Plate (B&H# SAWPDV1) which comes with the tripod head.

Q: 10. What would be the total weight be without the spreader? Thank you.

A: The aktiv6 head is 5.7 lb and the flowtech 75 legs without the spreader are about 6lbs without the spreader.