Designed for fixed installation on ceilings and other surfaces, the Sennheiser MZE 8060 Extension Tube enables you to extend the distance between an MKH-8000 Series mic capsule and its MZX 8000 XLR analog or MZD 8000 digital preamp/output module by 24"—while carrying the audio signal. The MZE 8060 Extension Tube is terminated with an adjustable pivot mount that enables precise aiming of the microphone toward the sound source.

For MKH-8000 Series Microphones    Fixed Installation on Surface/Ceilings    Extend Distance from Mic to Preamp (24")    Pivot Mount to Aim Microphone

• Compatible with MKH-8000 Series microphones
• Compatible with MZX 8000 XLR analog or MZD 8000 digital output modules
• 24" extension tube for fixed installation
• Audio signal carried in tube’s inner element
• Adjustable pivot mount for mic aiming

Related Questions and Answers

Q: 1. This could work with the mkh416?

A: The correct foam for the MKH-416 IS ITEM# SEMZW415

Q: 2. How long is the boom pole in this kit?

A: Minimum Length2.7' (79.0 cm)Maximum Length8.9' (271.3 cm)Weight1.5 lb

Q: 3. Does this fit a sennheiser 600 shotgun microphone?

A: The MZW 8060 windshield is designed for the length and diameter of the MKH 8060 microphone. The MKE 600 does have a similar diameter, however Sennheiser offers a windshield designed for it as well the MZW600. There are also several foam windshields available from third party manufacturers that offer similar performance.

Q: 4. If i want to use shotgun for VO, which is better. MKH416 or MKH8060? Which is more directional and reject side noise?

A: Both are good, the 416 is more directional, but it can be a bit too drastic in directionality if the subject even rocks around a bit it can be less forgiving, but the 416 will reject more side noise. The 8060 has a higher sensitivity.

Q: 5. Will this system correctly hold the Sennheiser MKH 60 microphone?

A: This kit will not fit the Sennheiser MKH-60 correctly. The correct Rycote windshield system is "Windshield Kit 4"; B&H# RYWSK4.

Q: 6. What is the length?

A: The Sennheiser MKH 8060 Moisture-Resistant Short Shotgun Microphone is 5.7" long.

Q: 7. Is there a softie designed for this shotgun? I’m looking for this to be my main run and gun due to the smaller size but a softie is a must.

A: Rycote 12cm Super-Softie Wind Shield for Shotgun Mics B&H # RYSS12M

Q: 8. What's the best model of Rycote shock mount for using this mic on a handheld boom? I don't want the heavy pistol-grip one.

A: The Rycote InVision INV-HG mkIII Microphone Suspension - Lyre Shockmount, BH #R YINVHGMKIII , would be a good option for a shockmount for the Sennheiser MH 8060 shotgun mic. this shockmount id lightweight and features a lyre- style suspension, and would connect to a boom pole with a 3/8-inch thread.

Q: 9. Is there enough room inside to fit a Sennheiser EW 500 plug on wireless transmitter attached to a Sennheiser 416 mic?

A: Unfortunately not,

Q: 10. How well does this work mounted to an FS7? Any suggestions on mounting without using the FS7 standard mic holder.

A: Depends on your expectations. Any on-camera mic is no substitute for a boom and/or cavalier mic queued to the speaker/talent.