Consolidate storage and streamline your workflow with the G-RAID Shuttle 4 96TB 4-Bay Thunderbolt 3 RAID Array from SanDisk Professional. Utilizing four 3.5" drive bays, this RAID array houses a 24TB 7200 rpm SATA hard drive in each bay. Preconfigured in RAID 5, this array also supports RAID 0, 1, and 10 modes. For those who do not require a RAID, JBOD is also available. The Thunderbolt 3 interface provides sequential read speeds up to 1000 MB/s, sequential write speeds up to 1100 MB/s, and can also be used with 10 Gb/s USB 3.2 Gen 2. Two Thunderbolt 3 ports can be used to daisy chain up to five devices and support up to 85W of power delivery. The SanDisk G-RAID Shuttle 4 comes pre-formatted for macOS 11 and later but may be used with Windows 10 and later via a simple reformat.

4 x 24TB 7200 rpm 3.5" HDDs    4 x SATA III 3.5" Drive Bays    Dual 40 Gb/s Thunderbolt 3 Ports    Supports RAID 0, 1, 5, and 10    Pre-Configured in RAID 5    Hardware RAID Controller    Read Speeds up to 1000 MB/s    Write Speeds up to 1100 MB/s    Preformatted for macOS 11 and Later    Windows 10+ Compatible via Reformat

• Optimized for multi-stream workflows
• Daisy-chaining for up to 5 additional devices
• Built-in hardware RAID

Boasting a 96TB capacity, the G-RAID Shuttle 4 device delivers high performance storage to save all your favorite 4K or 8K high dynamic range (HDR) and high frame rate (HFR) footage in a single location.

For all your demanding workloads and mission-critical footage, you can depend on the power and enhanced reliability of four removable UltraStar enterprise-class 7200 rpm hard drives.

With read speeds up to 700 MB/s and write speeds up to 850 MB/s in default RAID 5, the G-RAID SHUTTLE 4 device delivers the performance you need to quickly ingest content and natively edit footage to make changes in real-time.

Built for easy travel between your on-site production location and to the studio for post-production, the G-RAID Shuttle 4 device delivers powerful, transportable storage to help improve your workflow efficiency, wherever you are.

Built for multi-stream 4K and 8K production workflows, the G-RAID Shuttle 4 offers the bandwidth to support multi-camera editing in real time, render footage with multi-layer effects, and quickly export in an efficient workflow.

For maximum performance, the G-RAID Shuttle 4 device comes in RAID 5 out of the box and supports RAID 0, 1, 10, and JBOD to provide a versatile and flexible storage solution.

With dual Thunderbolt 3 ports, you can conveniently daisy chain up to five additional devices, keeping you connected to multiple drives, 4K displays and more, through a single connection to your computer.

With support for up to 85W of USB Power Delivery through the USB-C port, this drive can charge your compatible MacBook or MacBook Pro without having to take a separate MacBook charger out of your bag.

Backed by a limited 5-year warranty, you can be confident in the reliable storage of the G-RAID Shuttle for years to come.

Related Questions and Answers

Q: 1. If I want to get a full 160TB without any RAID (Redundancy), will I be able to get that?

A: You can use the full 160TB when in JBOD mode on the SanDisk Professional 160TB G-RAID Shuttle 8 8-Bay RAID Array (8 x 20TB, Thunderbolt 3 & USB 3.2 Gen 2) BH #SAGPH48H8160.

Q: 2. Can I plug two macbooks into this and edit off both of them at the same time from the two USB-C ports?

A: No, the SanDisk Professional G-RAID Shuttle 4 96TB 4-Bay Thunderbolt 3 RAID Array (4 x 24TB) can only be used with one computer at a time.

Q: 3. Can this run on Mac OS 10.14 Mojave?

A: This SanDisk Professional G-RAID Shuttle 4 24TB 4-Bay Thunderbolt 3 RAID Array (4 x 6TB) would be compatible with macOS 10.15+.

Q: 4. Has this concern been addressed: Apple’s M1-based computers require your G-RAID software to override kernel permissions?

A: There is no official statement regarding this issue with the SanDisk Professional G-RAID Shuttle 4, but other users seem to have developed a workaround. Here is a public discussion detailing a solution: https://bhpho.to/3tiaNwM

Q: 5. What's the usable storage when configured in RAID 5?

A: Please contact the manufacturer for the exact available storage in RAID 5 for this device. support@sandisk.com

Q: 6. I have a 2014 IMac 5k 27 inch. Will the thunderbolt cable work with this machine? Does it come with a usb compatible cable?

A: Because your 2014 27" 5K iMac has Thunderbolt 2 ports and the SanDisk Professional G-RAID Shuttle 4 24TB 4-Bay Thunderbolt 3 RAID Array (4 x 6TB) uses Thunderbolt 3 (and has its own power supply), you could use a Thunderbolt 3 to Thunderbolt 2 adapter, like the Apple Thunderbolt 3 Male to Thunderbolt 2 Female Adapter (B&H APMMEL2AMA), and a Thunderbolt 2 cable to connect this RAID device to your iMac.

Q: 7. My Mac is on OS-X 13.6.6 due to old Drobos. will it work with my Late 2019 MacPro?

A: Yes, the SanDisk Professional 96TB G-RAID Shuttle 8 8-Bay Thunderbolt 3 RAID Array (8 x 12TB) is compatible with macOS 10.15 and above. 13.6.6 will be compatible.

Q: 8. What power supply can I use as a replacement for the Shuttle-4?

A: The SanDisk Professional G-RAID Shuttle 4 48TB 4-Bay Thunderbolt 3 RAID Array (4 x 12TB) has an internal power supply, and is powered through a standard PC power cable like the Comprehensive Standard PC Power Cord - 6' (B&H # SAPH34H048TN).

Q: 9. Can i use usb c type that is not thunderbolt ?

A: Yes, you would be able to use USB C on this SanDisk Professional G-RAID Shuttle 4 48TB 4-Bay Thunderbolt 3 RAID Array (4 x 12TB) BH #SAPH34H048TN • MFR #SDPH34H-048T-NBAAB.

Q: 10. Can you just buy the enclosure?

A: The SanDisk Professional 160TB G-RAID Shuttle 8 8-Bay RAID Array (8 x 20TB, Thunderbolt 3 & USB 3.2 Gen 2), BH #SAGPH48H8160, is only sold with hard drives. Sandisk does not sell the enclosure only.