Bring your creations to life with the 1.75mm PolyLite ABS Filament from Polymaker. Compatible with a wide range of 3D printers, this ABS material allows you to print high-quality models and working prototypes, ideal for seasoned and entry level users.

PolyLite ABS uses a specialty bulk-polymerized resin, producing lower volatile content and minimal odor during printing, keeping your work area neat and clean. This ABS filament operates at a printing speed ranging from 30 to 50mm/s, nozzle temperature of 473 to 509°F, and bed temperature of 194 to 212°F. Each spool comes in a resealable vacuum bag and includes a desiccant bag to help fend off moisture when not in use.

1.75mm Diameter    Nozzle Temperature: 473-509°F    Bed Temperature: 194-212°F    Printing Speed: 30-50mm/s    Desiccant Bag    Resealable Vacuum Bag

Related Questions and Answers

Q: 1. This is a question for the Pelican Air 1615 with the yellow dividers. Can you remove the yellow dividers and / or the form on the lid when you want to use the case as empty case? Thank you!

A: Yes. Everything inside can come out. The dividers are entirely moveable so you can set it up in any configuration you wish. Great case.

Q: 2. Will this case fit a C100 MK II fully assembled?More specifically I need it to hold the following gear...- 2x C100 MK II + Batteries and power adapters.- Canon 24-70mm f2.8 L- Canon 50mm f1.2 L- Canon 100mm Macro f2.8 L- 3x Atomos Ninja Star + Batteries- GoPro Hero 5 Black with accessories- Tascam DR60DMKII

A: I believe it will. I carry my Canon 800mm, Canon 200-400mm, 100mm macro two camera bodies, and a flash and that fits. It's pretty close to 50 pounds with the case weight so next extra baggage fees.

Q: 3. Does this come with foam inserts?

A: Yes, the Pelican iM2200 Storm Case with Foam (Black) comes with the foam.

Q: 4. This case fit a blackmajick 6K with his cage , lens , Matter box , monitor , handle set ? Battery V mount , and mic ?

A: The Pelican 1615AirWF Wheeled Hard Case with Foam Insert (Black) (B&H# PE1615ACFB) has an interior space of 29.6 x 15.5 x 9.4" (75.2 x 39.4 x 23.9cm). Within that space there is a layer of foam on each side and also cubed (pick and pluck) foam in the middle. It will therefore accommodate many non tall items and rigs (up to about 7" tall) easily. To test that, we would recommend attempting to position all of the items you mentioned in a space that is about 27 x 13" (68 x 33cm) on a table while leaving an inch of room between items that need protection from each other where there would be cubed foam. If you can fit everything and still keep it all under 7.5" (19cm) tall then it should fit in the case.

Q: 5. Is the 9.4 inches height including the lid depth?

A: Yes the height of 9.4 inches includes the lid depth.

Q: 6. Does the Pelican iM2200 Storm Case with Foam (Yellow) have the pick 'n pluck cubed foam?

A: Yes, the cubed-type foam is packaged with the case, although, there's another type of padding that is configurable as separate compartments that is available from manufacturer as an optional purchase.

Q: 7. hello when i try to connect via usb to my mac pro nothing shows up. any help?

A: Here are several suggestions with the point to remember the computer wants to read the MicroSD card and not the camera. 1.Make sure the card is in the camera and is properly inserted. 2 Try a different USB input. This is particularly true on laptops and it will need to be a powered USB input. 3. Use a different USB cable; any with the correct connections will work. 4. Try a different computer. 5. Get another MicroUSB card, make sure to format it in the camera and try that.

Q: 8. Should i choose HPRC 2600F or Pelican iM2600 case for my Dji Phantom 2?

A: Both cases are too small for the DJI Phantom II. I would recommend going with the HPRC 2700PHA2 Hard Case for DJI Phantom 2 Vision / Phantom 2 Vision+. This is a much better fit, and also dedicated to the model. Website link: http://bhpho.to/1G6GRm9

Q: 9. does this come with a helmet mount and do you have to buy it seperate

A: It does come with a helmet mount. You have better options of action cam now. Check out Gitup Git2 and Sj5000 Elite.

Q: 10. does it fit the Impact Link Air-Cushioned Light Stand (12') light stands?

A: Unfortunately Impact Link Air-Cushioned Light Stand (12') is too large and won't fit inside of Pelican 1615AirTP Wheeled Hard Case with TrekPak Divider Insert System (Black)