Power your C1 underwater scooter for up to one hour with this Battery from LEFEET. The LiPo battery features a 97.68Wh / 4400mAh capacity that can run the motors of the C1 for up to one hour on its highest speed. It charges in approximately two hours and its capacity peaks just under the current requirements for air travel (always check with your airline first).

Designed to Power C1 Underwater Scooter    97.68Wh, 4400mAh LiPo Battery    22.2V Output Rating    Proprietary 2-Pin Connector    Airplane Friendly

Related Questions and Answers

Q: 1. Would it fit an 80D canon?

A: The Canon EOS 80D will fit in the Outex 110 Underwater Camera Cover (Medium) as long as the lens you are using and the camera is not longer than 10.23" (260mm). You do need to add the Outex Rear Glass for Underwater Camera Cover (86mm) and a front glass. Here is the link for the Outex Rear Glass for Underwater Camera Cover (86mm): https://bhpho.to/2FmGU2C The front glass you buy will depend on the lens you are using. For help to pick the correct front glass please email us at uw@bhphoto.com.

Q: 2. Does the silicone housing stretch enough for using a zoom lens which expands longer than the the case? In other words, if I have a 100/400 lens that is 8.25" expands to 11.5" will the 10.2" silicone lens portion stretch for the additional inch?

A: I'm sorry, no, your lens is too long.

Q: 3. What is the connection for the antennas? Can I purchase a cable to place them outside of a truck while the base station stays in

A: The manufacturer has not specified the connection type for the antennas on the Solidcom C1 Pro ENC Hub Base.

Q: 4. I have a 70 D, listed as compatible here. And yet there is no slot or hole to accommodate the wire for this unit when you close

A: The Canon 70D has a DC Coupler cord hole. Please see page 400 in this user manual: https://bhpho.to/3LThuet

Q: 5. Can the c1 pro hub connect to the c1 hub for cascading?

A: Yes, the Hollyland Solidcom C1 Pro ENC Hub Base can be connected with the Hollyland Solidcom C1 HUB Base for DECT Intercom System. Since the Solidcom C1 has no ENC function, it is best not to use the Solidcom C1 in a very loud environment.

Q: 6. only work whit iPhone? what about Android?

A: This particular light was designed only for use with iPhones. At this time, we do not carry a Profoto Android version. There are many other Android compatible lights. You can email us at Sales@BHPhoto.com, visit us in Live Chat, or call 800.606.6969 / 212.444.6615 to ask questions.

Q: 7. what canon camera models are compatible ?

A: Canon 90D, 80D, 77D, 70D, 60D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 200D, 100D, 1500D, 1300D, 1200D, 1100D, 1000D, G10, G11, G12, G15, G16, G1X, SX70, SX60, SX50, EOS M6, M6II, M5 are compatible with the Godox TR-C1 Wireless Timer Remote Control.

Q: 8. Does this work with the Canon EOS R5 Mark II?

A: The Watson CBA-C1 AC Adapter and DC Coupler Replaces Canon LP-E6N Battery is compatible with the Canon EOS R5 Mark II Mirrorless Camera.

Q: 9. Can I use it without the Wired Headset for Hub?

A: The Hollyland Solidcom C1 Pro ENC Hub Base can be used with 8 wireless remote headsets and 1 wired headset. The Hub and wireless remote headsets can function without using the wired headset.

Q: 10. Does the PGM IN port allow you to send an external audio source into the Solidcom system so all headsets hear that audio?

A: Yes, you can use the XLR PGM IN (Program Input) port on the Hollyland Solidcom C1 Pro ENC Hub Base to connect an external audio source for all of the headsets to hear.