Expand your business's network to support IP security cameras, access points, and other Power-over-Ethernet (PoE) compatible devices with the GEOVISION GV-APOE081C 8-Port Gigabit PoE+ Compliant Managed Network Switch. This web managed network switch features eight PoE+ compatible Gigabit Ethernet ports a total budget of 120W. Two SFP slots are also available for up to 1 Gb/s uplinks.

With a 20 Gb/s switching capacity and 14.88 Mpps forwarding rate, the GV-APOE081C delivers smooth data transfers. Mount this switch onto a desktop or rack using the included kit.

8 x Gigabit Ethernet PoE+ Ports    2 x Gigabit SFP Ports    20 Gb/s Switching Capacity    14.88 Mpps Forwarding Rate    Desktop & Rack Mountable    120W Power Budget    Up to 820' Range in Extend Mode    Web-Based Management

Configuring the switch for 10 Mb/s transfer speeds enables a range of up to 820' for long-distance installations.

This switch automatically checks the connection to powered devices.

Related Questions and Answers

Q: 1. If I run Ethernet out of this camera, could I convert to rs422 and control this with the AVMatrix vs0605 switcher that has ptz control capability?

A: No you can not. You will need to use the RS232 port on the camera when connecting to that switcher for PTZ Control. We sell cables that have RS232 on one side for the camera and RS422 on the other for your switcher/controller here is an example TecNec Visca Camera Control Cable 9-P D-Sub F to 8-P DIN M 50 Ft B&H # TEV9F50 MFR # VISCA-9F-50

Q: 2. If I were to power off of a POE injector, what voltage does the camera need?

A: This AViPAS AV-1280 can be powered over POE 802.3af which would be about 15w. You could use this injector to power the camera https://bhpho.to/3p9Ri4R

Q: 3. Can I connect my pioneer dj900 nexus mixer and Yamaha O1V mixer on 2 RDL-10 K, before entering the audio processorOr should I use the RDL-600? Better!?

A: We usually use these for summing stereo signals to mono. Very handy!The STD-10K is designed for combining or distributing consumer level audio signals, which often use RCA connectors (like DVD players, CD players, etc). The STD-600 is designed with the proper resistance for professional audio equipment, which typically uses XLR or TRS connectors.That DJ mixer has both types of outputs, but using the XLR outputs to match what the Yamaha is outputting is your best bet. Then they'll both be a good match for an STD-600. The device the signal is going to should also have a professional type input.I think the RDL product sheet has some example diagrams for dealing with a variety of balanced and unbalanced connections.

Q: 4. Can I control this camera with Cat6 PoE Cable and control it with a Mac computer running Telestream's Wirecast application?

A: Yes. The following unit offers POE. In order to drive the system you can control the unit via IR Remote Control " enclosed with purchase" or AViPAS AV-3104 3D Keyboard Controller " separate purchase" BH #AV3104V2 • MFR #AV-3104 https://bhpho.to/3kneB8B

Q: 5. Will the cameras 1080i / 59.94 SDI output resolution work with 1st generation of Black Magic ATEM switcher?

A: If you are referring to the original Blackmagic Television Studio Production Switcher then yes, it will work. That switcher required a 1080i59.94 setting from the camera, which this camera offers.

Q: 6. Can this run 4 or 6 ohm speakers?

A: The Onkyo TX-8470 Stereo Network A/V Receiver (BH # ONTX8470) are designed for 8 ohm speakers but will operate with 4 -6 ohm speakers as well.

Q: 7. Hi I am wondering how smooth the PT movements are. Does the "step motor" mean it moves in noticeable steps or is it a smooth motion. Would it be realistic to incorporate the PT move in the video broadcast or is it just for repositioning the camera while not to line? Thanks.

A: The pan/tilt/zoom mechanism uses an accurate step driving motor and functions quiet and smooth.

Q: 8. if I need to install this camera like 100 ft far from my switcher and the controller wich cables do I need to add to my cart?

A: Kopul Premium Series 3G-SDI Cable (100 ft) BH #KOVBBC4100 • MFR #VBBC-4100 https://bhpho.to/3oyvJeO

Q: 9. This camera came with a remote control?

A: Yes it does.

Q: 10. can this camera be Daisy Chained and if so, what is necessary?

A: You can daisy-chain the AViPAS AV-1281 for camera control. You will need to use an 8-pin male to male cascade cable and go from the RS-232 OUT of one camera to the RS-232 IN of another camera.