This ultrarugged, road-proof Mogami Gold Stage Right-Angle Female 3-Pin XLR to Straight Male XLR Mic Cable (30') is a high-quality, heavy-duty microphone cable for stage use where cables will be used heavily. The cable uses Mogami #2791, 2-conductor / 105-strand cabling. It is terminated with a right-angle, female 3-pin XLR connector at one end and a straight male 3-pin XLR connector at the other.

The #2791 cable features 105 strands of 24 AWG annealed bare copper (three times the number of copper strands compared to a typical high-quality cable). Its compact size, together with a heavy-duty binder and filler system, and a braided shield ensure that the cable is less likely to break when handled—ideal for rugged remote and onstage use in sound reinforcement, TV, and broadcasting applications.

Heavy-Duty Microphone Cable for Stage    Right-Angle Female to Straight Male XLR    Mogami #2791, 2-Conductor, 105-Strand

• Exhibits very low microphonic pickup and can operate at very-cold temperatures down to -4°F without losing its flexibility.
• Conductor insulation is XLPE (Cross-Linked Polyethylene), which has excellent electrical characteristics and prevents shrink-back during soldering.

Related Questions and Answers

Q: 1. Will this work with my stereo clippy mics which end in a 3.5 male trs to be able to use the xlr inputs for my MixPre6?

A: The ALZO 3.5mm Female to Dual XLR Male Stereo Microphone Adapter Cord for Pro Camcorders is compatible with stereo microphones which use a 3.5mm TRS connector.

Q: 2. If I use this LTE 503 console lamp, what do I use for the power source?

A: The Hosa Technology LTE-503 LED Gooseneck Console Lamp is designed to be powered by a console/mixer. Be sure to plug it in only where the console designates it ought to be connected to.

Q: 3. Can this be used between an iPhone 13 Pro and Rode Wireless Go ll microphone system?

A: Yes, the Movo Photo IMA-3 Female 3.5mm TRRS to Right-Angle Lightning Microphone Adapter Cable can be used to connect the Rode Wireless GO II receiver's output signal to the Lightning input of an iPhone.

Q: 4. Can this also be used as a headphone jack?

A: It should also be able to be used as a headphone output.

Q: 5. Would this work with the Rode VideoMic NTG TRRS output (allowing you to record the signal in addition to the safety track separately) with any mixer with XLR inputs?

A: The adapter has a female 3.5mm TRS connector, so to avoid the possibility of any issues with compatibility, it would be better to use a TRS cable instead of the TRRS cable since the auto-sensing feature may not work properly when connecting to an adapter rather than directly to a mic input. For a standard TRS cable, you could use the Rode SC2 Right-Angle 3.5mm TRS Coiled Patch Cable (B&H # ROSC2). As an easier solution, you can use a single Y-cable with 3.5mm TRS and left/right XLR connectors like the Kopul Y-Cable with 1/8" TRS Stereo Mini to 2 XLR Male Connectors - 3' (B&H # KOSMYCM2XM03) or Hosa Technology Pro Stereo Breakout Cable - 3.5mm Stereo Mini to Dual 3-Pin XLR Male - 3' (B&H # HOHMX003Y) or Hosa Technology Stereo Mini-Phone (3.5mm) Male to 2 XLR Male Y-Cable - 6.6' (B&H # HOYCSMM2XM6). All of the Y-cables are available in longer lengths. The single Y-cable ensures a proper left/right split and helps to avoid introducing noise into the signal.

Q: 6. I want to connect this to the LiveU Smartphone APP. Connect a Microphone and connect Headphones to listen to the IFB coming out of the APP. Do you think this is possible?

A: If the app would work with ear buds and its mic, it should work with this cable. Note: you must use a dynamic mic with this break-out cable. It does not pass phantom power for condensers. Use a dynamic with highest output possible. I recommend getting a TRRS extension cable to use with it especially if the iPhone is in a protective case.

Q: 7. Is the arm's mounting spigot 5/8"?

A: Yes the Auray BA-XE4 Broadcast Arm with Integrated XLR Cable BH #AUBAXE4 includes a 5/8-27 Threaded Mic Stud.

Q: 8. I see the box is phantom powered, but how does it pass 48v to condenser mics? If so, can 48v be turned off for use with dynamic mics?

A: This unit is made to power the Sennheiser MAS-1 button pecifically, to bring power to it and make it programmable for On, On/Off, PTT, and PTM modes. The phantom power from the mixer would go to the connected condenser microphone in the chain and if you are using a dynamic microphone it will not be affected by the condenser power in the line.

Q: 9. I'm sorry, I should have clarified my last question - I was asking if the stud/spigot that mounts to the base clamp is 5/8" in width? I'm planning on using a different clamp with a 5/8" receiver. (BH#SACSGC) Thank you.

A: The base stud/spigot is not specified.

Q: 10. Which volt battery do you need to power the colbor cl220 to go with this adaptor?

A: The COLBOR V-Mount Adapter and D-Tap to XLR V-Mount Battery Cable BH #COVM3KIT when used with a COLBOR CL220 would give half power when used with a 14.4v battery.