The Lance 4-Section Carbon Fiber Monopod from 3 Legged Thing is both strong and lightweight and can support up to 132 lb of camera gear. Built with four carbon fiber sections, the Lance monopod is designed to reach greater heights than an average monopod. It is perfect for filming above crowds or fences and for use on uneven terrain. It is ideal for taller photographers as it reaches 79.3" when fully extended. The top section features a large rubber grip for comfort alongside the smooth, curved, magnesium alloy mounting plate.

Load Capacity: 132 lb    Maximum Height: 79.3"    Minimum Height: 24.2"    4-Section Carbon Fiber Construction    Weight: 1.5 lb    Twist-Lock Joints with O-Pads for Grip    Includes Toolz Multi-Tool

The Lance 4-Section Carbon Fiber Monopod from 3 Legged Thing is both strong and lightweight and can support up to 132 lb of camera gear. Built with four carbon fiber sections, the Lance monopod is designed to reach greater heights than an average monopod. It is perfect for filming above crowds or fences and for use on uneven terrain. It is ideal for taller photographers as it reaches 79.3" when fully extended. The top section features a large rubber grip for comfort alongside the smooth, curved, magnesium alloy mounting plate.

• 8-layer carbon fiber construction

• Non-removable rotating wrist strap

• Twist-locks feature grippy rubber O-Pads

• Comfortable to use in any weather

• 1/4"-20 and 3/8"-16 spring loaded head mount

• 1/4"-20 and 3/8"-16 foot-mounting threads

• Detachable rubber boot

• Can also be used as a lighting or boom arm

• Supports almost 100 times its own weight

• Stylish matte black finish

• Includes Toolz multi-tool

Related Questions and Answers

Q: 1. Can the tip end, including rubber covering, of this Monopod be removed and replaced with a whole new Tip? If removable, can replacement tips actually be purchased? I use the Monopod as a walking staff as well as for camera support and the rubber is largely gone.

A: Unfortunately, the rubber tip end of the Oben CTM-2400 cannot be replaced.

Q: 2. It says the maximum height is 55.1 inches. Does that include the extended tripod legs at the bottom?

A: Sirui P-325FS 5-Section Carbon Fiber Monopod maximun height from the rubber foot to the base mount is 55 inches. If you prefer to use the tripod foot base then the monopod will raise by 3 addittional inches.

Q: 3. Can the VHR2 tilt heads for mono pods work with the CTM 2500 Monopod. Can the head also be used on tripods

A: Yes, the VHR2 tilt head is also compatible with the CTM 2500 model monopod. It can be mounted on tripods but is less useful as it has a limited range of movement when used on a tripod.

Q: 4. Can I directly connect Canon R5 Mark II with RF 200-800mm lens to Sir P-424FL monopod without additional head?

A: Yes, the Canon R5 Mark II with RF 200-800mm lens can be directly mounted to the thread of the Sirui P-424FL 4-Section Carbon Fiber Monopod.

Q: 5. Can I use this monopod with Sirui L-10 Monopod Tilt Head? Thanks

A: The large flat surface with a 1/4, 3/8 reversible screw.. should accommodate any ball or tilt head. I plan on using the Oben BE-117 Ball Head with mine.. A nice lightweight sturdy piece of gear that I also put into service as a walking stick when I am climbing places where I may loose my footing..

Q: 6. Does this bracket have a 1/4-20 threaded hole at the bottom of the side ? The photo seems to suggest such.

A: Yes, the 3 Legged Thing Zooey-QD L-Bracket for Nikon Z8 has a 1/4-20 threaded hole on the bottom side of the bracket. It also features two 3/8"-16 accessory sockets with 1/4"-20 adapter bushings.

Q: 7. Is this monopod compatible with the Sirui VH-10 fluid head and Benro S8Pro Fluid Video Head?

A: Yes, the Sirui SVM-165 3-Section Carbon Fiber Monopod includes a reversible 1/4"-20 or 3/8"-16 male screw that is compatible with both the Benro S8Pro Fluid Video Head and the Sirui VH-10 Fluid Video Head.

Q: 8. The CTM-2400 has a listed load capacity of 22 lb and the VH-A30 has a load capacity of 33 lb and yet the kit is listed with a load capacity of 11 lb. Is this accurate? I would imagine that the combined load capacity would be a minimum of 22 lb. Does combining the two items lower the load capacity?

A: It's likely that the kit previously used a less sturdy head and we forgot to change the information. It can definitely handle more than 11 lbs.

Q: 9. Does it work with the canon R3 and 500mm f4 lens?

A: Yes, the Sirui SVM-165 3-Section Carbon Fiber Monopod will support the Canon R3 plus a long telephoto lens such as a 500mm f/4.

Q: 10. I have a Peak Design Carbon Tripod with its quick-release plate mounted on my camera. Is the Oben CTM-2400 Monopod Head compatible with Peak Design quick-release plate?

A: Yes, the plate is Arca-Swiss style and that is the same as what the Oben CTM-2400 4-Section Carbon Fiber Monopod with VH-A30 Tilt Monopod Head Kit uses.