The SRB-80 Universal QR Clamp 80 from FLM is a 3.1"-long Arca-type quick release receiver with multiple mounting points to suit a large variety of applications. It is made of durable aluminum with a large mounting area that provides superior clamping force. This screw-actuated clamp features a bubble level and a numbered alignment scale.

Note: This clamp does not include a quick release plate.

Arca-Type Quick Release Clamp    3.1 x 2.4" Aluminum Clamp    Bubble Level    Classic Locking Knob    Four 1/4"-20 Female Mounting Threads    Three 3/8"-16 Female Mounting Threads

Related Questions and Answers

Q: 1. Will this just screw right on my FLM CB24?

A: No. the thread on your CG24 is 1/4"/20. The thread on the SRB40 is 3/8"/16 . But you can make it fit easily by using an adapter bushing. A good one would be B&H # WIBS100.

Q: 2. What is the load capacity of this clamp?

A: MAX LOAD IS 45 kg (kilos) or 99 lb and 3.3283 oz

Q: 3. Can the locking pin be removed?

A: The locking pin on the FLM QLB-80 Quick Release Clamp cannot be removed. However, if you squeeze the pin between a pair of pliers and push it down into the body of the clamp, the locking pin will be ineffective and out of the way.

Q: 4. Is this clamp Arca Swiss compatible and able to work on an RSS Arca Swiss L-plate?

A: Simply....YES.

Q: 5. Is able to hold Manfrotto RC2 plate ?

A: As the RC2 is not Arca-compatible, it will not work with the FLM QLB-80 Quick Release Clamp.

Q: 6. Can I use this on a FOBA Superball? My current FOBA clamp attaches with 2 countersunk screws 45mm apart

A: Yes, the super ball offers a 3/8 center stud screw and will allow the quick release plate to adapt nicely.

Q: 7. Will this clamp modify a FLM CB-32 head to have a Quick Disconnect system?

A: Hi,Yes it will, but you should observe that the safety pin is for FLM plates and not necessarily compatible with other Area-Swiss plates. I own a RSS L-plate for the Oly OM-D E-MII and the pin is annoying. Perhaps the pin could be knocked out. You could also consider a RSS QR instead. Google that combination. Either way you should apply a locking glue to keep it securely in place. FLM has a guide for that.

Q: 8. Is additional screw needed to mount to film CB-32?

A: In my FLM ball head, I turned the round plate and replaced it with the SRB-60 Quick Release Clamp using the screw that was attached to the FLM ball head. I only strengthened with the thread glue the connection of the screw with the ball head and screws with the SRB plate

Q: 9. I have Feisol 3442 with center column and P0 ball head, so the legs fold up over the ballhead and QR plate to make a very compact package. Do the protrusions on this plate allow the legs to fold completely? Because of the position of the QR knob, bubble level, and corners on my current square plate it is pretty fiddly to get it all lined up and fit into the Feisol carry bag.

A: The FLM SRB-60 Quick Release Clamp is very close. It has not been tested but if the clamp is 60mm it should just work.

Q: 10. Will this fit on the Arca-Swiss Monoball P0? I know the 60mm diameter is a perfect fit, but I'm worried about the knob on the clamp clearing the lever on at the top of the P0. I know Sunwayfoto makes a clamp specifically designed for the A-S P0 that has an extra-long clamp knob so that it extends beyond the possible obstruction of the P0's top lever ... do I need something like that, or will this FLM SRB-60 be fine?

A: We see no issue if you use this with the Arca-Swiss Monoball P0 with Panning System B&H # ARMPOPS. In fact, we are of the opinion that this clamp will work better than OEM or other 3rd party clamps.