This 86mm Nano-X Variable ND Filter from K&F Concept is a variable neutral density filter with a range of 1 to 5 stops. The density can be continuously adjusted by rotating the knurled aluminum ring. Increasing exposure density allows the use of a wider aperture setting, providing finer control over depth of field, which can help isolate the subject of an image. Increased density can also be used to lengthen shutter speed to enhance motion blur, as when shooting moving water. A variable density filter is also useful to control camera frame rates when shooting video.

Variable 0.3 to 1.5 Optical Density    Multicoating and Resistance Coating    Optical Glass Construction    Aluminum Filter Ring, Threadless Front    No "X" Cross on Images    Darkens Entire Image Area    Greater Control Over Exposure Settings    Allows Reduced Shutter Speed    Allows Wider Aperture

This filter is constructed with premium-grade Japanese optical glass for optimal light transmission and resolution with no added coloration.

28 layers of multicoating prevent flare and glare, allowing optimal light transmission and saturation. In addition, the nano-coating layer technology repels dirt, water, and other elements by beading up rather than absorbing and smearing. The nano resistance coating protects against saltwater, dust, wind, scratches, and other abrasive conditions and elements, making it ideal for use in harsh environments and locations.

Advanced filter technology eliminates the common "X" effect issue that often appears when using variable ND filters on wide-angle lenses.

The filter ring is crafted from aviation-grade aluminum for smooth rotation, it features a density scale and a knurled edge for easy gripping and rotation.

Related Questions and Answers

Q: 1. Will this cable work with the GH5Mii?

A: Yes, this should work well with the GH5 II.

Q: 2. Will this work to trigger an Atomos Ninja V?

A: Yes, this should work as any LANC controller and be able to start or stop recording, as Atomos states "Via LANC for Sony and Canon Cameras or Via LANC serial port".

Q: 3. Does it triggers the run/stop on a Blackmagic Ursa mini 4.6k?

A: Yes, this should work with the Ursa Mini 4.6K.

Q: 4. I am using the Tilta TA SFH side handle controller with the Nano motor. Does the LANC cable attach to the small port on the Nucleus Nano motor, or the 12V DC port on the TA SFH handle? I don't want to fry the remote port on my Panasonic S1H.

A: The Tilta Nucleus-Nano Run/Stop Cable for Panasonic GH4/GH5/GH5S/S1/S1R/S1H Cameras will connect to the remote port on the Tilta Nucleus-Nano Wireless Lens Control Motor.

Q: 5. I know it is listed for Panasonic, but might this work for a Canon Cine Camera with LANC run/stop?

A: no it will NOT work for canon Cine cameras the protocols are different, this is designed for the Panasonic lumix (photo) camera protocol no LANC

Q: 6. Will this work with the Sony FX6 and FX9?

A: Yes, the Tilta Nucleus-Nano R/S Cable for the Sony FS7/FS5, URSA, EVA1, Z CAM Cameras is also compatible with the FX6 and FX9.

Q: 7. will this work with the new nucleus nano ii motor ?

A: The Tilta Nano II motor uses USB-C, so the Tilta Nucleus-Nano Run/Stop Cable for Panasonic GH6/5S/5/4, S1/S1R/S1H Cameras is not compatible.

Q: 8. I cannot make this work. Do I need to enable anything in the camera? I simply connected the cable to Nano Motor, and the other side to GH5S. Pressing REC is transmitted from the wheel the to motor, but nothing happens in the camera. Not sure what to think. What might be wrong?

A: It should work by just plugging into the camera. If not, this could be a faulty cable. I would recommend getting a replacement.

Q: 9. Will this work with the Canon C70 2.5mm LANC port?

A: No. Following cable is designed and made for the following protocol systems Sony FS7/FS5, URSA, EVA1, Z CAM

Q: 10. Will it work with the GH6?

A: According to Tilta the Tilta Nucleus-Nano Run/Stop Cable for Panasonic GH4/GH5/GH5S/S1/S1R/S1H Cameras works with all the Panasonic GH/s Series of cameras.