The 82mm Nano-X Series Magnetic 3-Filter Kit from K&F Concept incorporates three of the most popular filter styles in a convenient carrying case. The protective UV filter reduces the bluish cast while protecting the lens front optic from debris. The circular polarizer can be rotated to reduce or eliminate reflections and glare or deepen the tone of a blue sky. The ND1000 neutral density filter reduces the entire image area by ten f-stops for finer control of aperture setting to reduce the depth of field, or to extend shutter speeds to increase image blur. Each 82mm filter features 16 layers of multicoating, plus resistance coating to protect its surface from water, oil, smudges, scratches, and abrasions. Each filter is made of optical glass and features a slim design to prevent vignetting on lenses as wide as 16mm.

The magnetic-filter ring system allows the filters to be attached, exchanged, or removed from a lens in just moments without wasting time screwing them into lens filter threads. The magnetic mounting ring screws onto the filter threads on the front of the lens and the filter is then securely held in place with powerful magnetic attraction.

The included zippered storage pouch has four pockets, one for each filter plus the magnetic mounting ring, and it features a bight interior for maximum visibility.

Clear Protective UV Filter    Circular Polarizing Filter    ND1000 Neutral Density Filter, 10-Stop    82mm Magnetic Mounting Ring    Multicoating and Resistance Coating    Water and Oil Resistant    Slim Design Does Not Vignette at 16mm    Zippered Carrying Case with 4 Pockets

Related Questions and Answers

Q: 1. Hello, Ive a nikon D610 it is compatible ?

A: The Nikon D610 will fit in the Outex Underwater Camera Cover Kit (Small, 82mm Lens). You could use lenses that are 6" long or shorter. The front glass is for lenses that have a 82mm filter thread. Other size front glasses are available.

Q: 2. Monopod mode can be used as extension for gimbal?

A: Yes, if a end-user really need the extra height it could be used with a gimbal but we would suggest to use with out ball head and a bushing is needed in order to do so. Oben 3/8"-16 to 1/4"-20 Reducer Bushing BH #OB1039 • MFR #OB-1039 https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe https://bhpho.to/43QIPGe

Q: 3. Will this work with AD200pro?

A: If you are using the Godox Bare Bulb Flash Head and the Godox 4.7" Standard Reflector for AD360 and AD200 Bare-Bulb Heads, B&H # GOSTDREFL, both attached to the Godox AD200Pro TTL Pocket Flash, then yes, the Bolt Grid and Filter Kit for VB-Series Bare-Bulb Flashes, B&H # BOVBGFK, would be compatible for your usage needs.

Q: 4. Can I mount the Ikan PT1200 Teleprompter on top of it and a sony camcorder?

A: The KF Concept tripod would not work well with the Ikan Prompter. We suggest strong tripods like the following https://bhpho.to/3se04QN or the lower cost https://bhpho.to/3MQUYSh

Q: 5. Is the ball head made of plastic or metal? Specifically is the part that tightens to hold the ball in place made of metal or plastic? Is the ball itself made of metal or plastic?

A: From one called up in the store, we determined that the ballhead is made of metal. The clamp, ball, and tension knob are all made of metal, but we can see that the ballhead uses a plastic mechanism for friction/tension.

Q: 6. Can I use a Benro (or other) gear head on this tripod?

A: Yes other heads can be used on this tripod such as those from Benro.

Q: 7. Is there a speed rating for this device? Can it hold a camera on a moving car at highway speeds?

A: Although a speed rating is not listed on the Oben Magnetic Mounting Kit with Dual-Action Mini Ball Head, it has a pull resistance of 100lbs which is expected to handle 60+ miles per hour.

Q: 8. Can the center column screw to the monopod? It is fairly short for a tall guy like me.

A: Yes, the center column of the SA254M2 DSLR Camera Aluminum Tripod with Monopod and Ball Head Kit can be attached to the monopod to extend the length to 185cm (72.8").

Q: 9. reversible center column, does that mean I can pop it out, then insert it upside down so the ball head is near the ground?

A: Yes. The K&F Concept SA254M2 allows the user to reverse the center column and thus use the camera practically at ground level.

Q: 10. Can the head be removed to attach my own ball head from my current tripod (Williams Optics)?

A: The ball head included with the K&F Concept SA284C1 Carbon Fiber Tripod/Monopod Kit with Ball Head can be removed.