The SWT3-31-HU 3x1 4K60 USB-C/HDMI Switcher from Kramer is an intelligent 3x1 automatic switcher that can handle HDMI signals and one USB-C input with resolutions up to 4K60. The unit features two HDMI inputs, one USB-C input, an HDMI output, and an HDMI loop output, all compliant with HDCP 2.3. It supports audio de-embedding, remote IP-driven management, and intelligent EDID processing. The intuitive, plug-and-play device automatically determines priority or last-connected auto switching based on active video signal detection and can be powered using PoE (Power over Ethernet).

Intelligent Automatic HDMI Switcher    Up to 4K60 4:4:4 Resolution    1 x USB-C & 2 x HDMI Inputs    Built-In Intelligent Control Gateway    Remote IP-Driven Management    Audio De-Embedding Supported    HDCP 2.3 Compliance    Intelligent EDID Processing

Controllable coupled signals switching of both AV and USB host inputs for concurrent connection with AV output and space USB devices allows collaborative hybrid meeting where multiple meeting participants are switched to share their content with both room and online meeting participants.

Connect any DP-Alt-Mode-capable USB-C device as an AV presentation source while providing the connected device with USB 2.0 and Ethernet connection, and (if PD-2.0-capable) up to 60 watts of power via a single USB-C cable connection only.

The unit is HDCP 2.3 compliant, supporting deep color, x.v.Color, CEC, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0.

Active USB-C or HDMI input signal is mirrored to HDMI loop output port for connecting a local monitor or adding an additional unit in a daisy chain.

Intelligent EDID handling, processing, and pass-through algorithm that ensures plug-and-play operation.

The digital audio signal passing through to the output is de-embedded, converted to an analog signal, and sent to the stereo balanced analog audio output. This enables playing the audio on a locally connected professional audio system (such as DSP) and speakers, in parallel to playing it on the speakers connected to the AV acceptor device (such as TVs with speakers).

Meeting presentation is simplified by manually or automatically turning on/off a CEC-enabled or serially controlled display when the presentation source is plugged in or unplugged with user-defined shut-down delay.

Remote IP-controller connection, browser operation webpage, local panel buttons, or remotely connected contact-closure buttons for easy and fully flexible user ports selection, signals routing, and switcher control.

Remote IP-driven intelligent control of connected AV, USB, and sensor devices via CEC, RS-232, IR, or I/O. Eliminating the need for an external control gateway, this feature reduces installation complexity and costs to enable easy integration with control systems such as Kramer Control.

Standard IT-grade 802.1x authentication for secured IT LAN connectivity.

Local panel indication LEDs facilitate easy local maintenance and troubleshooting. Remote IP-driven firmware upgrade and management via user-friendly embedded web pages and optional whole site management system ensure lasting and field-proven deployment.

PoE powering via LAN port connection, and MegaTOOLS fan-less enclosure for dropped-ceiling mounting or side-by-side mounting of two units in a 1 RU rack space with an optional rack adapter for easy switcher deployment.

Simply press the DISPLAY ON button to toggle on and off the power of the connected CEC-enabled display with awareness of display power on/off status via button LED indication.

Built-in flexible auto-disconnection operation of USB devices, such as space cameras and soundbars, enable detection of BYOD presenter disconnection by online meeting systems for their auto-activation, convenient integration, and ease of end-user operation according to space changing hybrid sessions needs

Related Questions and Answers

Q: 1. Do the HDMI inputs carry audio? If I set up four small video cameras will this input and switch the audio from those individual cameras along with their respective video feeds? Looking to use this to configure a hybrid videoconferencing setup...multiple people in same physical location...ie boardrooms, classrooms.

A: Yes, the HDMI inputs on the CAME-TV Multicamera HDMI/USB Video Mixer Switcher with 5.5" Touchscreen LCD (B&H# CAL2PLUS) will indeed carry audio such that the audio carried by each HDMI video feed will be transmitted with its corresponding audio.

Q: 2. Can I use this switchers with OBS to switch between my dslr cameras?

A: No. This switcher works as a selector. The input you choose is the one that is send, but if you switch from one input to another, the switching is not seamless and will probably give you a second of black in between. OBS will not control this unit.

Q: 3. What battery does it use ?

A: This would use 2 AA (not included)

Q: 4. I want to see if I can use this for streaming. If I connect 3 HDMI cameras to the device, what would be a good way to check the camera feed before I make it live?

A: I dont know.

Q: 5. Can you control the switcher from an iPad either natively or through an app like MixEffext, like you can with Blackmagic?

A: OSEE does not state that the OSEE GoStream Deck HDMI/USB Live Streaming Video Switcher Kit has a compatible app or can be controlled remotely at this time.

Q: 6. Will this add HDMI ports to my monitor?

A: This is a Switcher that has 3 HDMI Inputs and 1 Output. You would be able to connect 3 HDMI Sources to it to switch between on a single HDMI output.

Q: 7. Will it support an SACD player output?

A: Yes I think it will support SACD

Q: 8. Is the remote IR or RF? If IR is there a jack for remote IR sensor?

A: This products uses an included IR remote. It also includes an IR sensor with a cable.

Q: 9. Anyone using this with 1st generation Chromecast? I've owned this product for a year, and it has worked perfectly with my blu ray player, cable tv, and laptop. Today I tried to connect my first generation chromecast, but it's not working. The Chromecast works when I connect it directly to the tv, but it doesn't work when I connect it to the switch. Any suggestions? Thanks.

A: Well, the input port does not provide power for the USB and Full Comunication via HDMI to the TV. Hope this is a start point to figure out a way to make it work.

Q: 10. Does each connectted camera get recorded as an ISO file in it's own folder?

A: The OSEE GoStream Deck HDMI/USB Live Streaming Video Switcher Kit does not have isolated recording.