This 16x16 4K Seamless HDMI Matrix Switcher/Video Wall Processor Kit with 16 Receivers from BZBGear stands as a highly adaptable HDMI matrix switcher, video wall processor, and multiviewer, tailored for professional AV setups. Boasting extensive connectivity, it features 16 HDMI inputs, 16 HDMI outputs, and HDMI loop outputs as well as the ability to extend HDMI signals up to 230' via Cat 5 cable to the 16 included receivers. Supporting resolutions up to 4K60 4:4:4 and advanced video processing, it facilitates smooth switching between video sources, creation of 16 x 16 video walls, and simultaneous display of up to 16 sources on a single screen.

With balanced audio extraction and diverse control options, it ensures an immersive experience, ideal for presentations and conferences. A future-proof design, boasting HDCP 2.2 and 1.4 compliance and firmware updates via a micro-USB port, serve as a comprehensive solution for professional AV installations. The unit offers advanced EDID management and has no switching delay or signal loss.

HDMI Matrix Switcher with 16 HDMI Inputs    Extends HDMI Signals up to 230'    Supports Resolutions up to UHD 4K60    Kit Includes 16 Receivers    Display up to 16 Sources on One Display    Advanced EDID Management    Compliant with HDCP 2.2 & 1.4    No Switching Delay or Signal Loss

• 16 HDMI inputs, which can be independently routed to 16 HDMI outputs
• Supports multiple video walls at the same time
• Up to 16 sources can be displayed on each output in different layouts
• Supports video wall configurations of up to 7 different modes with each monitor
• HDCP 2.2 compliancy ensures copyright protection
• Control via panel button, remote control, RS-232 control, TCP/IP control
• Supports resolution up to 4K60 4:4:4
• No switching delay or picture loss during transitions
• EDID management: Seamless scaling for the best results
• Supports HDMI audio formats including Dolby-5.1 and DTS-5.1
• Analog audio extraction; the audio can be independently switched
• Control and management application available for Windows, iOS, Mac, and Android platforms

Related Questions and Answers

Q: 1. I have 1 roll of paper and 2 muslin backdrops that I use. Will this work for that?

A: As long as they have the same cardboard core and roll up to roughly the same diameter, I don't see why not. Otherwise they make an extension rod that can be used to support rolls with no tube.

Q: 2. Can I swap different paper roles out whenever I need to? Like if I wanted to swap a red background for the grey one that's up, would I be able to easily?

A: It would be just a matter of removing the drives from the cardboard core of one paper roll in exchange for another paper roll.

Q: 3. so - assuming I get the aluminimum cores for 3 vinyl backgrounds 9x20s each; that'll easily put me over 40 pounds EACH -about 120 lbs. The max weight recommended for this is 22lbs (each) and I cannot find any solutions that accommodate a 40lb limit (each) even though that seems to be normal for vinyl. Are there ANY products that can accommodate Vinyl and be sturdy at the same time? (i.e. metal chains and not plastic etc)?

A: This background support is capable of supporting the weight of a vinyl background. https://bhpho.to/364HptE

Q: 4. Can this support 140 -wide rolls?

A: Yes, it should be able to, just as long as you have secure wood backing on your wall and long screws (i.e. 1.5-2 ). The only concern would be the weight of the full roll. Perhaps just double check with the manufactuerer on the maximum weight that the hooks can take?

Q: 5. Once you get a 9' roll mounted, what is the total width including the mounts? I want to make sure I have enough clearance on either end.

A: The ends stick out 6-8 from the roll of paper. I would have at least an 11' wall to attach to.

Q: 6. I have a 95 and 3/4 inch wall and want to mount an 86” roll. Will it fit with the varidrive ends, cardboard core and brackets? I know it is very tight, any way to fit it though?

A: No, you will not have room to install the Impact Varidrive system on a 95 3/4’’ wall.

Q: 7. I'll be using this kit with 86-inch wide seamless paper (about 6 lbs per roll). I've read that one should remove the rolls after each use to prevent sagging in the middle and then issues unrolling/rolling. Have others found that to be the case? I was hoping I could leave these rolls up on these brackets for long periods of time.

A: I have had 86-inch rolls up for more than 8 months now, no sagging noticed.

Q: 8. Can these be mounted on stands?

A: Hi , in light stands no , there is some mount that you can use for that , but for me is better in the wall

Q: 9. does this product has a 3C certification for export compliance?

A: The Roland VP-42H is made in Japan (not China) and lists a CAN ICES-3 (B)/NMB-3(B) compliance. https://proav.roland.com/global/products/vp-42h/

Q: 10. I have this system I use for 2- 9 ft paper rolls and it worked fine for awhile but now when I move the chains it isnt catching the rolls and unwinding as it should. I have tried taking it off and reinstalling and tightening and everything. any ideas on what could be the problem?

A: There is a tension control on the drive without the chain to control how loose or how tight the drive will move. If this does not correct the issue, I would recommend speaking with the manufacturer by calling 212-594-2120.