The ZoomSHOT 20 SE QUSB POV Camera System from Vaddio combines a white ZoomSHOT 20 SE fixed POV camera and a Quick Connect hub interface. It is suitable for use in education, house of worship, live event, video conferencing, and corporate environments. The system captures up to 1920 x 1080p60 video using a powerful 1/2.8" sensor and transmits it up to 150' over Cat 5 cable to the hub. The combination enables powering the camera, sending control signals, and transmitting video over a single cable.

The camera features a 20x digital zoom range with a wide 63° angle of view. The hub receives video from the cameras and can output the video via HDMI, HD DB15, USB-B 2.0, or via IP using H.264 streams. The camera can be controlled through the hub via RS-232, IP, or the included IR commander remote control.

Fixed USB POV Camera System    Up to 1920 x 1080p Resolution Capture    Quick Connect USB Connection Box    Single 1/2.8" Exmor Sensor    20x Total Zoom, 64° Field of View    Video, Power, Network, Control via Cat 5    IP, HDMI, HD DB15, and USB Video Output    Supports Cat 5 Cable Runs up to 150'    IR Remote and RS-232 Serial Control

• Fixed POV camera with 20x powered zoom with 63° horizontal field of view
• Up to 1080p60 resolution capture
• HDMI, YPbPr (DB15), USB-B 2.0, or H.264 IP streaming outputs on Quick Connect hub
• Power/Video/Control on two Cat 5 cables up to 150' between the camera and the Quick Connect hub
• Manual Pan/Tilt with EZ Set tensioning system

Related Questions and Answers

Q: 1. What is the max resolution for the HDMI output and for the USB output?

A: The PTZCam POV-X 4Kp30 USB/HDMI Camera with 4-12mm C-Mount Lens' HDMI output can support up to 2160p 30fps, and the USB output will support video feeds of up to 1080 30P.

Q: 2. Is this compatible with the Vaddio AV Bridge?

A: The Vaddio ConferenceSHOT AV Camera (Black), BH #VA999999500B, is not compatible with the Vaddio Audio-Video Bridge (BH # VAAVBRIDGE).

Q: 3. What lens mount does this camera have?

A: Actually its just a CS mount, but you are able to purchase a C type ring adapter for C mount lenses. The camera comes with a 3.2mm 12MP CS mount lens.

Q: 4. How to mount the camera?

A: This camera can be mounted to walls or ceilings. You will find a few recommended mounts on the "Accessories" page under the "Mounts and Brackets" tab.

Q: 5. Is this compatible with the Vaddio ProductionVIEW HD-SDI MV CAM?

A: Yes it is. The Roboshot 12E is compatible with the Vaddio ProductionVIEW HD-SDI MV CAM.

Q: 6. Are the line and mic inputs on the side functional? Seems like the spec sheet only lists the I/O cable for audio in.

A: The breakout cable includes a 3.5mm Audio input that can be configured as either a Mic level or Line level input via the camera's menu.

Q: 7. Does this camera require POE+ or can it operate with POE?

A: The AIDA Imaging UHD NDI|HX3 30x Zoom POV Camera has native PoE+ capability, which can be coupled with a PoE+ switch for power, video and control.

Q: 8. Do this UHD6G-200 AIDA camera have built in IR filter or do it need IR corrected lenses to film in daylight?

A: This camera is listed as being ready to use inside/out/day/night without need for additional filtering.

Q: 9. How closely would this camera's image match the Sony SRG-X120? If this is a wide-angle camera, is there any way to correct it?

A: This camera will match the Sony SRG-X120 1080p PTZ Camera. Sony uses the same sensor family in both cameras so they will match

Q: 10. What is the purpose of this camera?

A: The PTZCam POV-X Full NDI box camera features an exceptional image quality courtesy of a large CMOS sensor and a range of high-quality lenses. You can connect to either IP workflows via a full-bandwidth NDI or a traditional SDI infrastructure. The PTZCam POV-X 4Kp30 USB/HDMI Camera with a 4–12mm C-Mount Lens would be used for compact installations where space is tight.