The Pro-Stix 71" Carbon Fiber Tripod with Leveling Head from ProMediaGear is a versatile and lightweight travel tripod designed for photographers and videographers that includes a leveling head instead of a typical flat apex. The tripod leveling head allows the camera angle to be adjusted in all directions, ensuring that the camera is leveled, even on uneven terrain. It has a maximum height of 71" and can support up to 60 lb of equipment. The tripod legs are made of 10 layers of carbon fiber, making them durable and easy to transport. The tripod legs have independent spread and three adjustable locking positions of 24, 50, and 84°, so they can be set up for high or low-angle compositions. Additionally, the tripod apex features three 1/4"-20 threaded adapter ports and a spirit level for easy readability. The apex is made of CNC-machined T6061 aluminum and features a red finish. Each carbon fiber leg has a hardened stainless steel foot spike for outdoor use and a rubber foot for indoor use.

Load Capacity: 60 lb    Working Height Range: 3.8 to 71"    Folded Length: 23.8"    Leveling Head Platform    4-Section Carbon Fiber Legs, Twist Locks    2x Bubble Level    3 x 1/4"-20 Threaded Accessory Mounts    CNC-Machined T6061 Aluminum Apex    Weight: 4.3 lb

Related Questions and Answers

Q: 1. Is it difficult to tighten this to the video head? There are no locking screws like those used on the Manfrotto model.

A: No, simply turn the lever clockwise and your video head will lock.

Q: 2. What is the diameter of the base where a head attaches?

A: The diameter of the base plate on the TR424L is about 2.9 inches.

Q: 3. Will this work with Enduro or Gitzo 4 Series tripods?

A: Yes. The following tripod must have a 75mm bowl dropping to go to 100mm Bowl.

Q: 4. Hi, I am 6'3" and I am wondering if I should get the tallest one? 6.7-77. Thank you in advance

A: In general I recommend that your tripod should be at least within 9 inches of your height. So a tripod and head that goes to 66 inches or more is best.

Q: 5. Is this compatible with the Nicky tripod byb3 Legged Thing? Thanks!

A: The 3 Legged Thing Legends Nicky 4-Section Carbon Fiber Hybrid Video/Photo Tripod is compatible with the ProMediaGear Pro-Stix 75mm Half Ball, when configured to receive a 75mm bowl adapter (not flat base adapter).

Q: 6. Will this work on Gitzo systematic Series GT4542LS tripods?

A: The ProMediaGear 75mm to 100mm Bowl Adapter for Pro-Stix Tripods may work with the Gitzo Series 4 Systematic Carbon Fiber Tripod (Long), however we have not tested the combination and can not confirm if it would work or not.

Q: 7. Can I put a head on these legs with a 75mm bowl? Specifically sachtler ACE M

A: Yes, you would have to remove the Leofoto tie-down from the tripod and use the tie-down that comes with the Ace Head. But the Leofoto LVC-193C Carbon Fiber Tripod with Leveling Base has a 75mm bowl that works with 75mm heads like the Sachtler Ace M.

Q: 8. Does this head still come with the PX-6 plate, although it is discontinued? Are 1/4 or 3/8 screws included?

A: The ProMediaGear GKJr Katana Pro Aluminum Gimbal Head comes with the PX6 plate and 2 1/4-20 screws.

Q: 9. Does anyone know if this will work with a FLM CP34-L4 II 10X Carbon Fiber Series II Tripod?Thanks

A: no it does not appear that this will work with this tripod https://www.bhphotovideo.com/c/product/1514023-REG/flm_32_34_903_cp34_l4_ii_carbon_tripod.html/overview as the tripod does not seem to support a standard 75mm half ball

Q: 10. What is the folded diameter?

A: The widest folded diameter would be at the head which would be 5".