Designed for streaming, podcasting, and recording, the Behringer XENYX 1002SFX is a 10-input mixer with an integrated 2x2 USB audio interface and digital effects from Kark Teknik which offers clear and natural sound in a compact and portable format. The mixer features two high-quality XENYX mic preamps with phantom power for working with high-end condenser microphones. Additionally, there are four sets of 1/4" stereo line inputs, stereo RCA inputs and outputs, and a 1/4" FX send as well as a 1/4" headphone output.

The XENYX 1002SFX is easy to set up and operate with all connections and controls easily reachable from the top of the unit. The two mic channel inputs feature 3-band British-style EQ and panning knobs, while channels 3/4 to 9/10 are offered on stereo 1/4" inputs each with a balanced control and an FX send. The stereo USB audio interface allows you to record your mix directly to a computer and then play it back.

Ultralow-Noise Mixer    Two XENYX Preamps with +48V    Four Stereo Line Inputs    Two 1/4" Main and Monitor Outputs    1/4" Headphone Output    Klark Teknik FX Processor    Built-In 2x2 USB Audio Interface    British-Style 3-Band Channel EQ for Mics    Stream / Stereo RCA Inputs and Outputs    Main Mix and Headphones Outputs

• Ultralow-noise analog mixer for streaming, podcasting, and recording
• Two Award winning XENYX microphone preamps for warm and musical sound
• Stereo USB audio interface to connect to your computer or mobile device
• Klark Teknik FX processor with 100 great sounding presets
• Direct mixing of PC / gaming sounds into the streaming output
• Analog mixing and equalization for pure sound
• Versatile sub mixer for network-enabled audio devices
• Stereo channel 9/10 automatically switches between TRS input and USB playback
• 3-band EQs for warm and musical sound
• FX send control per channel for internal or external FX processor
• High-quality monitoring, phones, and streaming outputs
• Stereo RCA inputs assignable to main mix or monitor/phones outputs

The XENYX "S" series can be connected to any computer or mobile device making it super easy to integrate digital sources with analog equipment. It can also be used as a versatile sub mixer for feeding network enabled audio devices with several other audio signals.

Two mono channels with EQ and Low Cut, plus 4 stereo channels, a stereo RCA streaming input and stereo USB input allow you to blend a total of 14 audio signals for streaming, monitoring via headphones, or on high-quality TRS outputs. The mixer delivers crystal-clear audio for high-quality streaming, plus it comes with an amazing Klark Teknik FX processor with a hundred presets to add that extra spice to your mix.

• The 1002SFX features level, panorama/balance, and effect send controls on all channels and allows for precise sound shaping for any input source. Mono channels have additional Gain controls and 3-band EQ with switchable Low Cut, while stereo line-level channels offer a switchable 12 dB boost.
• The FX send control per channel lets you use the internal stereo effects programs and/or plug in any external FX processor of your choice, such as the Behringer FX2000, for amazing audio effects flexibility. When nothing is plugged into the stereo line inputs 9/10, then the stereo 9/10 channel will receive the USB input signal and its control can be used to adjust the USB level conveniently.
• Finally, a 2.4" Main fader ensures extremely smooth volume control of your output mix.

Related Questions and Answers

Q: 1. Can I bring the program feed from this mixer into Zoom or other similar software directly via the USB port on the mixer?

A: Yes, the Yamaha MG10XU can send a 2-channel mix out to a computer via USB.

Q: 2. No Hi-Z switch for any of the inputs--therefore, I can't/shouldn't plug an electric guitar or bass directly into this mixer; I should use a 'direct box'--am I understanding that correctly? Thanks.

A: That is correct. Since there is no Hi-Z switch on this mixer a direct box would be required to plug a guitar or bass into it. Here's a solid DI option B&H # RAPRODI.

Q: 3. Can I connect a mic pre-amp to this board? I assume the TRS input of the combo jacks will bypass the internal pre-amps. Thanks!

A: Good Morning, We do not use a preamp with the MG10XU as For our setup there is no need we use a amp after the MG10XU. This allows us to connect a smart phone or a computer to the amp to be heard over the speakers when needed.I do hope this helpsArt

Q: 4. I have an sm57 with very low output. Will this be enough to drive it? The 2i2, m-track and ur22 were not. Thanks.

A: The Yamaha MG10XU should work fine with an SM 57. Its hard to tell as I cant see how you have hooked things up and what is going on. But you should have no problem with that mixer and the 57. The first thing to check is phantom power off as that is a dynamic mic. The next thing to do is bring up the mic pre level to almost 12 oclock. Before you even touch the fader. Its the white knob that says gain. Make sure the switch is in mic and not line and the 20-dB pad is not engaged. Also make sure the main volume on the mixer is up.

Q: 5. Can you adjust the volume between playback coming from your computer, and the input coming from your mic? Most audio interfaces have an input/playback knob where you can adjust and hear varying levels of the track playing on your computer, and what's coming out of your microphone.

A: Yep. Every channel is individually adjustable for volume including anything coming in from the computer or mic.

Q: 6. Can I use a dynamic and a condenser mic at the same time? Does it give individual phantom power?

A: The Yamaha Yamaha MG10XU can provide phantom power to channels 1-4 together, but phantom power cannot be toggled on/off for an individual channel. This would not pose a hazard to most dynamic microphones, although with vintage or ribbon mics you would want to be cautious.

Q: 7. Will this mixer power high impedance headphones such as the sennheiser hd650's ?

A: The headphone output on the Yamaha MG10XU will cater to headphones with a nominal impedance of 40 ohms. Because the HD650's are 300 ohms, the use of an external headphone amplifier will be beneficial and recommended.

Q: 8. Can You Record While Playing live On To A Recorder?

A: Yes, you can connect the output from the Yamaha MG10XU Mixer to an audio recorder to record a live performance. You can also record directly to a Mac or Windows computer, or to an iPad using the mixer's built-in USB audio interface.

Q: 9. Do I need an interface for this or does it's USB channel work the same way?

A: This unit features a built in interface. When connected to a computer the mixer will pass the main stereo mix via its USB connection.

Q: 10. Hi can i connect 4 speakers and a subwoofer I'm going to buy it for my son he has a pair alto TS-415 that he bought here a pair qsc

A: Yes, it is possible to connect 4 speakers and a subwoofer to the Yamaha MG10XU 10-Input Mixer. The Alto Professional TS415 Active Loudspeakers can connect directly to the mixer, and as long as the subwoofer and the QSC speakers are also active (powered) speakers, they can also connect directly or be linked together.