Resin 3D Printer Enclosure

Creality S Size 3d Printer Enclosure

Product Code: ga159170
Availability: In Stock

$197.94 $247.43

Qty

12 reviews Write a review

Description
Reviews (12)

Protect your 3D printer and prevent debris from interfering with your process using the Creality Small Size 3D Printer Enclosure. Derived from high-quality aluminum foil with flame-retardant materials, the enclosure can properly manage heat levels to reduce the impact of lower external temperatures for optimal printing. Easily construct and take apart the enclosure thanks to the simplistic iron pipe supports and 3-way corner connectors. With the tight zipper head, you get quick access to the inside, allowing you to quickly monitor the status and remove your prints when finished. The 18 x 23 x 48" size allows you to fit a variety of smaller Creality printers including the Ender-2, Ender-3, CP-01, and CR-100.

18 x 23 x 48" Size Aluminum Foil with Flame Retardant Iron Pipe Skeleton Waterproof Design Zippered Enclosure

General
Compatibility	Creality Ender-3 / CP-01 / Ender-2 / CR-100
Physical
Color	Black
Material of Construction	Aluminum Foil
Dimensions	28.3 x 23.6 x 18.9" / 72 x 60 x 48 cm
Weight	5.3 lb / 2.4 kg
Packaging Info
Package Weight	5.74 lb
Box Dimensions (LxWxH)	27.5 x 7 x 4"

Related Questions and Answers

Q: 1. Can I use the monitor with only one NP-xxxx Sony type Battery or it requires two batteries to work? Thanks

A: The FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor can be powered from a single battery.

Q: 2. Does it display the video being recorded in 4k 120 fps ?

A: Yes it will. Most cameras that are able to record 4K 120 fps will scale down the video output signal to something the monitor can handle.

Q: 3. does this monitor have any delay on the SDI loop through?

A: The FeelWorld LUT7S should not have any significant delay via the SDI loop though ports.

Q: 4. Will the unit charge the rechargeable external battery?

A: It will not. This is not able to charge the batteries that it uses.

Q: 5. I'm looking for an extender for a Godox Witstro AD200. Would this work? Suggestions?

A: On testing, the FX1 Better Beamer fits the AD200 but does not very reliably, making it only semi-usable in our opinion.

Q: 6. does this cable work to power on this monitor by d tap v mount battery or not ? thanks https://www.bhphotovideo.com/c/product/1537905-REG/kondor_blue_kb_700_d_tap_to_dc_right.html

A: No. The DC barrel connector on the monitor is a 3.5mm connector and the one on this cable is 2.5mm.

Q: 7. When using the DC OUT using two (2) installed NP-F970 batteries, will it double the output voltage?

A: No, the output voltage would remain 8.4v.

Q: 8. Are any LUTs pre-loaded? Does it come with s-LOG3?

A: The FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor does not come preloaded. You load the LUTs via a SD card.

Q: 9. Is this monitor able to pass through a 3G 1080p50 level b signal? When I feed it a 1080p50 signal it outputs 1080psf25

A: While the FeelWorld LUT7S 7" 3D LUT 4K HDMI and SDI Monitor (B&H# FELUT7S) can accept a 1080p/50 3G-SDI Level B signal, it will not recreate the exact same signal to the single (not Dual-Link) 3G SDI out as the Level B input is split into two pseudo fields that would have to be reprocessed to be outputted again as a Level B signal. We recommend recording any desired 1080p 50/60 frame rate content prior to passing it through this monitor.

Q: 10. Can i use this to shoot 4K120p on Canon R5?

A: This monitor is for viewing only and will not interfere with the Canon R5 and its ability record 4K at 120p.

baltamouf	24/09/2024
Really easy to use and provide consistent and quality results. The must have to fill shadows and add a pop in the eye of any wildlife 5

Tony D.	14/09/2024
Getting the big for Wildlife photography is something that leads to acquiring expensive camera, lenses, flash and other accessories. It was nice to find something that added a ton of return on a small investment. If you are into wildlife, or looking to use a 300+ focal length for scenery, and have a flash (specifically the 430EX II in this case), this is well worth the money. It gives that extra kick of light to fill in the shadows on days of flat or contrasty lighting. Used best when you are in Av mode, it helps balance out the scene. Less useful when you are trying to grab animals in motion as it may not keep up depending on your battery situation with the flash. 5

SeattleBirdMan	07/09/2024
Early testing shows good results. Simple to use and can really direct the light a long way. 5

MichaelL	23/08/2024
Being able to add a touch of light to my wildlife photography, especially to birds in shadow, has greatly increased my number of keeper shots. As a matter of fact, I may have to re-take some shots I thought were good, and replace them with new shots using the Better Beamer because I know I can now improve upon them. 5

Paul	19/08/2024
I bought this to use to extend my flash while taking pictures on the Delaware River of wintering Bald Eagles. It came with two cases to carry it in my camera bag which is a extra bonus! 5

David	29/07/2024
Increases your flash's reach in a compact and light package that won't hurt your budget; Recommend adapting to your flash with something stronger than just the supplied Velcro strip. Would be nice if it came with a case. There's a learning curve re: its use, but, once mastered, provides a good solution to low-light and/or fill flash wildlife photography. 5

Donald	26/07/2024
I use the Better Beamer for birds and was blown away when shoot herons/Egrets at distances of 100-200 ft (560mm lens) and I have RED-EYE in the birds!! of course the egrets it is WHITE-EYE..! works excellent and I love the fill flash with birds with backlight, it couldn't be better! now it is in the bag at all times! Don Price 5

Debby	16/06/2024
Wanting to improve my wildlife photography and after reading a lot, I decided to purchase the Better Beamer. Glad I did. It has really improved my photos and for only $bucks! It's not too often you can find gear that improves your photography and doesn't cost an arm and a leg. It stays on my flash without sagging, is easy to pack, and lightweight. The lens seems flimsy, but it works and doesn't add weight to my pack. I think if properly used and stored it will last a long time. I'm very happy with it. 5

Charles	23/05/2024
I use this shooting wildlife with either my 28-300mm or my 100-400mm lens. It gives just enough light to brighten eye sockets and fur/feathers or a beek. Great tool added to my tool box 5