Bring your creations to life with the Creality Halot-Mage S Resin 3D Printer. Able to create highly detailed models, the Halot-Mage S gives seasoned users the accuracy and precision needed for a wide range of designs.

Leveraging LCD MSLA printing technology and equipped with a 10.1" Mono LCD screen, you get a build volume of 8.7 x 4.9 x 9.05", a 13,320 x 5120 LCD resolution, and a layer height accuracy up to 0.2mm, ensuring your creations retain the little details in their final print. Control your Halot-Mage S with the 4.3" display screen and access your settings from the physical buttons located on the front of the printer. The Halot is compatible with a wide range of 405 nm resin materials, ensuring a print speed up to 150 mm/h. You can use the Halot-Mage S as a stand-alone device without connecting to your Windows or macOS system, or easily transfer your files using Wi-Fi, USB-A, and RJ45 ethernet connections.

LCD MSLA Printing Technology    8.7 x 4.9 x 9.05" Build Volume    10.1" Mono LCD Screen    13,320 x 5120 LCD Resolution    Up to 150 mm/h Printing Speed    USB-A, RJ45, Wi-Fi Connectivity    405 nm Resin Compatible    4.3" Display screen    Built-In Smart Air Purifier    Windows & macOS Compatible

Integral Light Source 3.0 technology offers pro-level fidelity, delivering a uniformed UV light that cures each resin layer precisely and consistently.

The Halot-Mage S offers a faster Dynax+ mode which boosts printing speeds to create your models quicker. With the Dynax Motion System, the dual linear rails and a closed-loop motor to adjust the platform bed quickly and accurately for greater model precision.

The 3-layer Pictor film provides added durability to your prints, allowing you to easily release the build plate without an issue.

Equipped with a CNC-machined aluminum alloy build plate outfitted with a special laser-carved pattern, the plate offers enhanced adhesion and quick removal of your models.

Reducing bad odors from affecting your area, the built-in Smart Air Purifier uses an activated carbon filter to gather resin odor efficiency. For greater measure, you can connect an exhaust tube for even less fumes.

Related Questions and Answers

Q: 1. What is the recommended DC power supply for the Feelworld LUT 7? It doesn't come with one and I want to be able to plug into the DC port with wall power.

A: The BMPCC4K's battery slot requires 7.4V. Although 8.4V is more than enough to power the camera through the battery slot, we recommend that you regulate the voltage to 7.4V.

Q: 2. does it let you go sdi in to hdmi out for video display to another unit?

A: Unfortunately it would only loop back through the SDI

Q: 3. Is this monitor able to pass through a 3G 1080p50 level b signal? When I feed it a 1080p50 signal it outputs 1080psf25

A: While the FeelWorld LUT7S 7" 3D LUT 4K HDMI and SDI Monitor (B&H# FELUT7S) can accept a 1080p/50 3G-SDI Level B signal, it will not recreate the exact same signal to the single (not Dual-Link) 3G SDI out as the Level B input is split into two pseudo fields that would have to be reprocessed to be outputted again as a Level B signal. We recommend recording any desired 1080p 50/60 frame rate content prior to passing it through this monitor.

Q: 4. What is the output latency from the SDI connection with a LUT applied?

A: Feelworld does not report the latency on their monitors. Typically monitors have less than 2 frames of latency.

Q: 5. Are any LUTs pre-loaded? Does it come with s-LOG3?

A: The FeelWorld LUT7 7" 3D LUT 4K HDMI Monitor does not come preloaded. You load the LUTs via a SD card.

Q: 6. Can I connect input power to the monitor from D-Tap battery? What's a the input plug specs?

A: You can, provided you can ensure that the power is regulated for a 7 to 24 VDC at 2 A input.

Q: 7. What are the image resolution and sensor size?

A: Matteroirt has not released those specifications for the Matterport MC300 Pro3 3D Digital Camera Acceleration Bundle.

Q: 8. Is the zoom shown on the loop out?

A: No the loop out will only show the signal as it came in, it loops out the signal from the input.

Q: 9. does this cable work to power on this monitor by d tap v mount battery or not ? thanks https://www.bhphotovideo.com/c/product/1537905-REG/kondor_blue_kb_700_d_tap_to_dc_right.html

A: No. The DC barrel connector on the monitor is a 3.5mm connector and the one on this cable is 2.5mm.

Q: 10. When using the DC OUT using two (2) installed NP-F970 batteries, will it double the output voltage?

A: No, the output voltage would remain 8.4v.