Take full control of your monitoring setup with the Monitor Pilot from TC Electronic, a multi-monitor switching control station that supports up to three sets of studio monitors. With the tactile and intuitive remote control and fully balanced XLR I/O, this all-analog box allows for transparent and passive A/B comparisons.

Along with three sets of monitor outputs, each with a dedicated ±9 dB trim pot, you get a high-quality headphone amplifier with support for 8- to 600-ohm headphones, ensuring wide compatibility. The Monitor Pilot also sports a stereo 3.5mm TRS aux input for external media devices. With a durable aluminum housing, this sleek monitor station will survive rigorous studio use. The Monitor Pilot includes a universal power supply.

Control up to 3 Sets of Studio Monitors    Easy-Access Master Volume Control    Separated I/O Housing and Control Panel    XLR Inputs and 3.5mm TRS Aux Input    Stereo Outs with Precision Trim Pots    Passive A/B Monitor Set Switching    Pure Analog Signal Path    Durable Aluminum Housing    Visual Feedback of Active Speaker Set    Includes Universal Power Supply

The most visible part of the system is the remote control, which combines a sleek design with tactile intuitiveness and a tiny footprint. In short, it will not take up a lot of desktop real estate and with a solid rubber base, it will sit firmly wherever you decide it should reside. Finally, the single-cable connection keeps your desktop clutter free.

The I/O box can be easily mounted on top of your desk, or underneath the table for easy access to the headphones output and 3.5mm mini jack input. Since it’s also an all-analog solution, the Monitor Pilot is completely computer independent, making integration an absolute breeze.

The solid aluminum knob gives you a tactile feel of ultimate precision control and pure quality. The VCA based circuit ensures L/R level tracking with very little risk of imbalance, even at low playback levels. Most audio interfaces, digital mixers, and other digital audio devices are restricted to digital attenuation of the output signal, reducing the digital-to-analog converter resolution, ultimately rendering a poorer output sound quality.

Using Monitor Pilot as your post-DAW analog level control ensures unrivaled sonic integrity of your Main Out audio signal. And with support for a wide range of headphone impedances (8 to 600 ohms) and 18 dB trimming to cover a large range of sensitivities, the Monitor Pilot supports virtually all headphones on the market.

With individual trim pots for speaker outputs, you can keep the playback levels even across the various speaker sets you have connected. In short, no level jumps when you switch between speakers. Simply keep your playback at the same SPL with Monitor Pilot and take your mixing approach to the next level, even when using headphones.

Related Questions and Answers

Q: 1. My mixer aux outs are XLR-M, not 1/4". So how do I send the PM351 the monitor output signal? Adapter cable of some sort?

A: If you need to connect a single XLR output from your mixer to the 1/4" TRS input on the Rolls PM351 Personal Monitor Station, you can use a cable like the Hosa Technology HXS-010 Balanced 3-Pin XLR Female to 1/4" TRS Male Audio Cable - 10' (B&H # HOHXS010). If you need to connect both XLR outputs from your mixer to the PM351, simply add on a Y-adapter like the Hosa Technology YXF-101.5 XLR Male to Dual XLR Female Audio Y-Cable (B&H # HOYCXM2XF18).

Q: 2. Is this the right cable for Canon R series cameras?

A: No, the Godox Monitor Camera Control Cable for GM6S (Multi Connector) is not the correct cable for Canon R series cameras. The correct cable would be the Godox Monitor Camera Control Cable for GM6S (USB Type-C Connector), B&H # GOGMCU6.

Q: 3. How many QuadHead2Go devices do I need to connect 8 monitors to a single input? 2 or 3?

A: To connect 8 monitors using the Matrox QuadHead2Go Multi-Monitor Controller Appliance, you would need 2 units, but you would also need 2 DisplayPort outputs from your source in order to connect to 8 monitors. Matrox recommends using a Luma Series graphics card such as the Matrox Luma Series LUMA A380 Graphics Card, BH #MALUMAA380 to connect multiple appliances.

Q: 4. Does this unit feature a locking barrel for the DC input?

A: No, the Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control does not include a locking barrel power adapter in the box.

Q: 5. Does lanc control work with the fx3, if so does touch to focus work?

A: The Sony FX3 Full-Frame Cinema Camera (B&H # SOFX3) does not have a LANC port, which will not allow for control on the Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control.

Q: 6. Can the pm351 pass through phantom power for a mic like SM7B + Cloudlifter?

A: This unit does not provide phantom power.

Q: 7. If I live in a low humidity country, around %30 and I need to keep the humidity up at %50, does this cabinet help to keep the humidity high when it is sec outside?

A: This is a de-humidifier not a humidifier thus it cannot add humidity.

Q: 8. Is the DC Output 2.5 or 2.1?

A: The DC output is 2.5mm on the Lilliput HT7S (BH #LIHT7S).

Q: 9. Is this compatible for a7s iii?

A: The Sony a7S iii has a multi port that this cable could connect too. However, the camera is not listed under the compatible cameras. So I can not guarantee this will work with the a7S iii.

Q: 10. Can you loop through HDMI input to SDI output?

A: The Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control does allow for loop out with either HDMI or SDI.