Create jaw-dropping visual effects with the white JMAZ Lighting ATTCO BEAM 100, a bright LED moving head well suited for lighting designers, DJ’s, bands, clubs, bars, and installations where small footprint and low weight is critical. The fixture is powered by a 75W white LED with a 2&dge; beam angle and includes a color-wheel (12 colors + open) and a Gobo wheel (17 static Gobos + open). An 8-facet rotating prism creates a more impressive show to cover larger areas. A frost filter can create wash effects for a completely different look than the standard beam.

The ATTCO BEAM 100 features 8-/16-bit pan and tilt movement for smooth and precise resolution. The fixture features several control modes including primary/secondary, sound activated, automatic, RF remote control, and DMX (12/14 channel modes). The control panel includes an LCD menu with four-buttons for manual setup as well as two 3-pin DMX I/O. The ATTCO BEAM 100 includes an Omega bracket, powerCON power cord, a DMX signal cable, and a safety cable.

For Designers, DJs, Bands, Clubs, Bars    1 x 75W White LED Light Source    0 to 100% Dimming and Variable Strobe    2° Beam Angle    DMX, Show, and Sound Active Modes    Color Wheel (12 Colors) & Gobo Wheel    Frost Filter with Wash Effect    3-Pin DMX I/O + 8-Facet Prism    8-/16-Bit Resolution for Pan/Tilt    Includes Omega Bracket and Power Cord

• Light source: 1 x 75W white LED
• Long life LED (rated over 50000 hours)
• 2° beam angle
• 4 operating modes: Sound Active, Show Mode, DMX Controlled, and RF Remote Control
• 9 built-in lighting shows
• 8-facet prism effect
• Frost filter with wash effect
• 1 color wheel with 12 colors plus white
• 17 static gobos plus open
• 10 and 12 DMX channels modes
• Electronic dimming: 0 to 100%
• 8-/16-bit smooth and precise resolution for pan/tilt movement
• 360 / 540 / 630° pan and 90 / 180 / 270° tilt movement
• Pan / tilt invert mode for contrasting movement when fixtures are linked together
• 3-pin XLR connectors in/out
• Scan position memory, auto reposition after unexpected movement
• Includes Omega bracket for truss mounting

Related Questions and Answers

Q: 1. Can this turn the iphone sideways?

A: This set up is for vertical or portrait shooting only. You could rig it horizontally but then you lose it's portability.

Q: 2. Does this include two of everything (USB cables, silicone diffusers, colored gels, etc.)?

A: The manufacturer does not specify this information and because this is a new product, which we do not yet carry in stock as of this writing, we have no way of verifying this physically.

Q: 3. can i use this with a canon camera? also can this ring light height be adjusted to go up and down??

A: You will not be able to mount a Canon Camera in this ring light, but you could certainly use it as a key or fill light without a Smart Phone in the light. The height adjustment does not go straight up or down, but you can adjust the goose neck.

Q: 4. Will this work with iPad?

A: This is designed to hold a Smart Phone up to around the size of an iPhone 8 Plus, it will not be able to handle an iPad.

Q: 5. Will it work with iPhone 7plus?

A: This will work with the iPhone 7 Plus.

Q: 6. Can this be plugged into the wall and powered by a USB charger (like an iPhone lightning charger)?

A: Im sorry I have not used the product yet.

Q: 7. Does this support pass-through charging? Asked another way, can it remain ON continuously if connected to a power source?

A: yes it can. When plugged in it will provide enough power to slow down the battery drain. Eventually it will die but it will take considerably longer than if you were just relying on battery life.

Q: 8. I don't see a picture of any clip to attach to "any round or flat object up to 1.5in. thick". How does this light attach to a laptop or notebook computer?

A: You could use a Lume Cube Suction Cup Mount with 360° Ball Head https://www.bhphotovideo.com/c/product/1475564-REG/lume_cube_lc_scup11_suction_cup_mount_with.html?sts=pi&pim=Y

Q: 9. Can I mount this ballhead on a Manfrotto 055XPROB tripod?

A: The Vanguard BBH-100 Ballhead is compatible with the Manfrotto 055XPROB legs. The Manfrotto 055XPROB legs have a 3/8-16 mount thread, as does the Vanguard BBH-100. The Vanguard also comes with a reducer bushing should you want to mount it onto a set of legs/monopod with 1/4-20 thread.

Q: 10. Is there anything included in this kit in addition to the bulbs? I.e. hard case, mounts, cables, etc?

A: The Nanlite PavoBulb 10C Bi-Color RGBWW LED Bulb (12-Light Kit)Nanlite PavoBulb 10C Bi-Color RGBWW LED Bulb (12-Light Kit) includes the following: 12 x PavoBulb 10C Bulb, 3 x USB Type-C Cable, 6 x Nanlite E27 Magnetic Mount for PavoBulb 10C, 6 x Nanlite Control Bank Li-Ion Battery Pack for PavoBulb and PavoTube, 6 x Nanlite NP-F Battery Adapter and mount for PavoBulb 10C, 12 x Nanlite PavoBulb Bouncer with Suction Cup, 3 x AC Cable, Hard Case, and a Limited 2-Year Manufacturer Warranty with a Registration Extension of 1-Year.